2014-06-05 |
juno: Rework header file inclusion
...
Change-Id: I0837d787837a40a724a8b7f2e3abd82287f403f3
Sandrine Bailleux
committed
on 5 Jun 2014
|
2014-06-04 |
Enable Debug and SError exceptions on warm boot path
...
Enable Debug and SError exceptions:
- when receiving an SMC;
- when a CPU is physically powered up (upon resumption from suspend
or in response to a PSCI cpu_on call)
Change-Id: I7e5613e34034be6ed68ec9e2aef4de66aa5ac65e
Sandrine Bailleux
committed
on 4 Jun 2014
|
Do not route external abort and SError interrupts to EL3
...
The software running at a given exception level should handle
external aborts and SError interrupts itself.
Change-Id: Ic249fdf8472e0c64306ce3913562a2ac89c78627
Sandrine Bailleux
committed
on 4 Jun 2014
|
2014-05-29 |
Fix compilation issue for IMF_READ_INTERRUPT_ID build flag
...
This patch fixes the compilation issue for trusted firmware when the
IMF_READ_INTERRUPT_ID is enabled.
Change-Id: I94ab613b9bc96a7c1935796c674dc42246aaafee
Soby Mathew
committed
on 29 May 2014
|
Pass 'cookie' parameter to interrupt handler in BL3-1
...
The interrupt handling routine in BL3-1 expects a cookie as its last
parameter which was not being passed when invoking the interrupt
handler in BL3-1. This patch fixes that by passing a dummy cookie
parameter in the x3 register.
Fixes ARM-software/tf-issues#171
Change-Id: Ic98abbbd9f849e6f1c55343e865b5e0a4904a1c5
Soby Mathew
committed
on 29 May 2014
|
2014-05-27 |
Further renames of platform porting functions
...
Rename the ic_* platform porting functions to plat_ic_* to be
consistent with the other functions in platform.h. Also rename
bl31_get_next_image_info() to bl31_plat_get_next_image_ep_info()
and remove the duplicate declaration in bl31.h.
Change-Id: I4851842069d3cff14c0a468daacc0a891a7ede84
Dan Handley
committed
on 27 May 2014
|
2014-05-23 |
Split platform.h into separate headers
...
Previously, platform.h contained many declarations and definitions
used for different purposes. This file has been split so that:
* Platform definitions used by common code that must be defined
by the platform are now in platform_def.h. The exact include
path is exported through $PLAT_INCLUDES in the platform makefile.
* Platform definitions specific to the FVP platform are now in
/plat/fvp/fvp_def.h.
* Platform API declarations specific to the FVP platform are now
in /plat/fvp/fvp_private.h.
* The remaining platform API declarations that must be ported by
each platform are still in platform.h but this file has been
moved to /include/plat/common since this can be shared by all
platforms.
Change-Id: Ieb3bb22fbab3ee8027413c6b39a783534aee474a
Dan Handley
authored
on 14 May 2014
Achin Gupta
committed
on 23 May 2014
|
2014-05-22 |
Introduce interrupt handling framework in BL3-1
...
This patch adds a common handler for FIQ and IRQ exceptions in the
BL3-1 runtime exception vector table. This function determines the
interrupt type and calls its handler. A crash is reported if an
inconsistency in the interrupt management framework is detected. In
the event of a spurious interrupt, execution resumes from the
instruction where the interrupt was generated.
This patch also removes 'cm_macros.S' as its contents have been moved
to 'runtime_exceptions.S'
Change-Id: I3c85ecf8eaf43a3fac429b119ed0bd706d2e2093
Achin Gupta
committed
on 22 May 2014
|
Add support for BL3-1 as a reset vector
...
This change adds optional reset vector support to BL3-1
which means BL3-1 entry point can detect cold/warm boot,
initialise primary cpu, set up cci and mail box.
When using BL3-1 as a reset vector it is assumed that
the BL3-1 platform code can determine the location of
the BL3-2 images, or load them as there are no parameters
that can be passed to BL3-1 at reset.
It also fixes the incorrect initialisation of mailbox
registers on the FVP platform
This feature can be enabled by building the code with
make variable RESET_TO_BL31 set as 1
Fixes ARM-software/TF-issues#133
Fixes ARM-software/TF-issues#20
Change-Id: I4e23939b1c518614b899f549f1e8d412538ee570
Vikram Kanigiri
committed
on 22 May 2014
|
Populate BL31 input parameters as per new spec
...
This patch is based on spec published at
https://github.com/ARM-software/tf-issues/issues/133
It rearranges the bl31_args struct into
bl31_params and bl31_plat_params which provide the
information needed for Trusted firmware and platform
specific data via x0 and x1
On the FVP platform BL3-1 params and BL3-1 plat params
and its constituents are stored at the start of TZDRAM.
The information about memory availability and size for
BL3-1, BL3-2 and BL3-3 is moved into platform specific data.
Change-Id: I8b32057a3d0dd3968ea26c2541a0714177820da9
Vikram Kanigiri
committed
on 22 May 2014
|
Rework handover interface between BL stages
...
This patch reworks the handover interface from: BL1 to BL2 and
BL2 to BL3-1. It removes the raise_el(), change_el(), drop_el()
and run_image() functions as they catered for code paths that were
never exercised.
BL1 calls bl1_run_bl2() to jump into BL2 instead of doing the same
by calling run_image(). Similarly, BL2 issues the SMC to transfer
execution to BL3-1 through BL1 directly. Only x0 and x1 are used
to pass arguments to BL31. These arguments and parameters for
running BL3-1 are passed through a reference to a
'el_change_info_t' structure. They were being passed value in
general purpose registers earlier.
Change-Id: Id4fd019a19a9595de063766d4a66295a2c9307e1
Vikram Kanigiri
committed
on 22 May 2014
|
2014-05-19 |
Merge pull request #78 from jeenuv:tf-issues-148
Andrew Thoelke
committed
on 19 May 2014
|
2014-05-16 |
Add build configuration for timer save/restore
...
At present, non-secure timer register contents are saved and restored as
part of world switch by BL3-1. This effectively means that the
non-secure timer stops, and non-secure timer interrupts are prevented
from asserting until BL3-1 switches back, introducing latency for
non-secure services. Often, secure world might depend on alternate
sources for secure interrupts (secure timer or platform timer) instead
of non-secure timers, in which case this save and restore is
unnecessary.
This patch introduces a boolean build-time configuration NS_TIMER_SWITCH
to choose whether or not to save and restore non-secure timer registers
upon world switch. The default choice is made not to save and restore
them.
Fixes ARM-software/tf-issues#148
Change-Id: I1b9d623606acb9797c3e0b02fb5ec7c0a414f37e
Jeenu Viswambharan
committed
on 16 May 2014
|
Rework BL3-1 unhandled exception handling and reporting
...
This patch implements the register reporting when unhandled exceptions are
taken in BL3-1. Unhandled exceptions will result in a dump of registers
to the console, before halting execution by that CPU. The Crash Stack,
previously called the Exception Stack, is used for this activity.
This stack is used to preserve the CPU context and runtime stack
contents for debugging and analysis.
This also introduces the per_cpu_ptr_cache, referenced by tpidr_el3,
to provide easy access to some of BL3-1 per-cpu data structures.
Initially, this is used to provide a pointer to the Crash stack.
panic() now prints the the error file and line number in Debug mode
and prints the PC value in release mode.
The Exception Stack is renamed to Crash Stack with this patch.
The original intention of exception stack is no longer valid
since we intend to support several valid exceptions like IRQ
and FIQ in the trusted firmware context. This stack is now
utilized for dumping and reporting the system state when a
crash happens and hence the rename.
Fixes ARM-software/tf-issues#79 Improve reporting of unhandled exception
Change-Id: I260791dc05536b78547412d147193cdccae7811a
Soby Mathew
committed
on 16 May 2014
|
2014-05-08 |
Merge pull request #63 from soby-mathew/sm/save_callee_saved_registers_in_cpu_context-1
...
Preserve x19-x29 across world switch for exception handling
danh-arm
committed
on 8 May 2014
|
Merge pull request #62 from athoelke/set-little-endian-v2
...
Set processor endianness immediately after RESET v2
danh-arm
committed
on 8 May 2014
|
Preserve x19-x29 across world switch for exception handling
...
Previously exception handlers in BL3-1, X19-X29 were not saved
and restored on every SMC/trap into EL3. Instead these registers
were 'saved as needed' as a side effect of the A64 ABI used by the C
compiler.
That approach failed when world switching but was not visible
with the TSP/TSPD code because the TSP is 64-bit, did not
clobber these registers when running and did not support pre-emption
by normal world interrupts. These scenarios showed
that the values in these registers can be passed through a world
switch, which broke the normal and trusted world assumptions
about these registers being preserved.
The Ideal solution saves and restores these registers when a
world switch occurs - but that type of implementation is more complex.
So this patch always saves and restores these registers on entry and
exit of EL3.
Fixes ARM-software/tf-issues#141
Change-Id: I9a727167bbc594454e81cf78a97ca899dfb11c27
Soby Mathew
committed
on 8 May 2014
|
2014-05-07 |
Access system registers directly in assembler
...
Instead of using the system register helper functions to read
or write system registers, assembler coded functions should
use MRS/MSR instructions. This results in faster and more
compact code.
This change replaces all usage of the helper functions with
direct register accesses.
Change-Id: I791d5f11f257010bb3e6a72c6c5ab8779f1982b3
Andrew Thoelke
committed
on 7 May 2014
|
Correct usage of data and instruction barriers
...
The current code does not always use data and instruction
barriers as required by the architecture and frequently uses
barriers excessively due to their inclusion in all of the
write_*() helper functions.
Barriers should be used explicitly in assembler or C code
when modifying processor state that requires the barriers in
order to enable review of correctness of the code.
This patch removes the barriers from the helper functions and
introduces them as necessary elsewhere in the code.
PORTING NOTE: check any port of Trusted Firmware for use of
system register helper functions for reliance on the previous
barrier behaviour and add explicit barriers as necessary.
Fixes ARM-software/tf-issues#92
Change-Id: Ie63e187404ff10e0bdcb39292dd9066cb84c53bf
Andrew Thoelke
committed
on 7 May 2014
|
Set processor endianness immediately after RESET
...
SCTLR_EL3.EE is being configured too late in bl1_arch_setup() and
bl31_arch_setup() after data accesses have already occured on
the cold and warm boot paths.
This control bit must be configured immediately on CPU reset to
match the endian state of the firmware (little endian).
Fixes ARM-software/tf-issues#145
Change-Id: Ie12e46fbbed6baf024c30beb50751591bb8c8655
Andrew Thoelke
committed
on 7 May 2014
|
2014-05-06 |
Reduce deep nesting of header files
...
Reduce the number of header files included from other header
files as much as possible without splitting the files. Use forward
declarations where possible. This allows removal of some unnecessary
"#ifndef __ASSEMBLY__" statements.
Also, review the .c and .S files for which header files really need
including and reorder the #include statements alphabetically.
Fixes ARM-software/tf-issues#31
Change-Id: Iec92fb976334c77453e010b60bcf56f3be72bd3e
Dan Handley
committed
on 6 May 2014
|
Make use of user/system includes more consistent
...
Make codebase consistent in its use of #include "" syntax for
user includes and #include <> syntax for system includes.
Fixes ARM-software/tf-issues#65
Change-Id: If2f7c4885173b1fd05ac2cde5f1c8a07000c7a33
Dan Handley
committed
on 6 May 2014
|
2014-04-15 |
Allocate single stacks for BL1 and BL2
...
The BL images share common stack management code which provides
one coherent and one cacheable stack for every CPU. BL1 and BL2
just execute on the primary CPU during boot and do not require
the additional CPU stacks. This patch provides separate stack
support code for UP and MP images, substantially reducing the
RAM usage for BL1 and BL2 for the FVP platform.
This patch also provides macros for declaring stacks and
calculating stack base addresses to improve consistency where
this has to be done in the firmware.
The stack allocation source files are now included via
platform.mk rather than the common BLx makefiles. This allows
each platform to select the appropriate MP/UP stack support
for each BL image.
Each platform makefile must be updated when including this
commit.
Fixes ARM-software/tf-issues#76
Change-Id: Ia251f61b8148ffa73eae3f3711f57b1ffebfa632
Andrew Thoelke
committed
on 15 Apr 2014
|
Merge pull request #36 from athoelke/at/gc-sections-80
...
Using GCC --gc-sections to eliminate unused code and data
danh-arm
committed
on 15 Apr 2014
|
2014-04-08 |
Define frequency of system counter in platform code
...
BL3-1 architecture setup code programs the system counter frequency
into the CNTFRQ_EL0 register. This frequency is defined by the
platform, though. This patch introduces a new platform hook that
the architecture setup code can call to retrieve this information.
In the ARM FVP port, this returns the first entry of the frequency
modes table from the memory mapped generic timer.
All system counter setup code has been removed from BL1 as some
platforms may not have initialized the system counters at this stage.
The platform specific settings done exclusively in BL1 have been moved
to BL3-1. In the ARM FVP port, this consists in enabling and
initializing the System level generic timer. Also, the frequency change
request in the counter control register has been set to 0 to make it
explicit it's using the base frequency. The CNTCR_FCREQ() macro has been
fixed in this context to give an entry number rather than a bitmask.
In future, when support for firmware update is implemented, there
is a case where BL1 platform specific code will need to program
the counter frequency. This should be implemented at that time.
This patch also updates the relevant documentation.
It properly fixes ARM-software/tf-issues#24
Change-Id: If95639b279f75d66ac0576c48a6614b5ccb0e84b
Sandrine Bailleux
committed
on 8 Apr 2014
|
Revert "Move architecture timer setup to platform-specific code"
...
This reverts commit 1c297bf
because it introduced a bug: the CNTFRQ_EL0 register was no
longer programmed by all CPUs. bl31_platform_setup() function
is invoked only in the cold boot path and consequently only
on the primary cpu.
A subsequent commit will correctly implement the necessary changes
to the counter frequency setup code.
Fixes ARM-software/tf-issues#125
Conflicts:
docs/firmware-design.md
plat/fvp/bl31_plat_setup.c
Change-Id: Ib584ad7ed069707ac04cf86717f836136ad3ab54
Sandrine Bailleux
committed
on 8 Apr 2014
|
2014-03-26 |
Place assembler functions in separate sections
...
This extends the --gc-sections behaviour to the many assembler
support functions in the firmware images by placing each function
into its own code section. This is achieved by creating a 'func'
macro used to declare each function label.
Fixes ARM-software/tf-issues#80
Change-Id: I301937b630add292d2dec6d2561a7fcfa6fec690
Andrew Thoelke
committed
on 26 Mar 2014
|
Move per cpu exception stack in BL31 to tzfw_normal_stacks
...
Fixes ARM-software/tf-issues#70
Change-Id: I7f024f173fbdecd315076f528b05d6295aff7276
Vikram Kanigiri
authored
on 20 Mar 2014
Dan Handley
committed
on 26 Mar 2014
|
2014-03-21 |
Remove partially qualified asm helper functions
...
Each ARM Trusted Firmware image should know in which EL it is running
and it should use the corresponding register directly instead of reading
currentEL and knowing which asm register to read/write
Change-Id: Ief35630190b6f07c8fbb7ba6cb20db308f002945
Vikram Kanigiri
authored
on 11 Mar 2014
Dan Handley
committed
on 21 Mar 2014
|
2014-03-10 |
Move architecture timer setup to platform-specific code
...
At present, bl1_arch_setup() and bl31_arch_setup() program the counter
frequency using a value from the memory mapped generic timer. The
generic timer however is not necessarily present on all ARM systems
(although it is architected to be present on all server systems).
This patch moves the timer setup to platform-specific code and updates
the relevant documentation. Also, CNTR.FCREQ is set as the specification
requires the bit corresponding to the counter's frequency to be set when
enabling. Since we intend to use the base frequency, set bit 8.
Fixes ARM-software/tf-issues#24
Change-Id: I32c52cf882253e01f49056f47c58c23e6f422652
Jeenu Viswambharan
authored
on 7 Jan 2014
Dan Handley
committed
on 10 Mar 2014
|