zynqmp: Make MMIO write FW call synchronous ...

We must guarantee that writes have become effective before returning to
the caller. Hence, wait for PMUFW signaling completion of the FW call
before returning to the rich OS.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>

zynqmp: Add support to provide silicon id through SMC ...

Add support to provide silicon id to non-secure
software through SMC.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>

[ sb
Move zynqmp_get_silicon_id outside of compile guards to avoid build
errors.
]

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>

zynqmp: pm: Implemented pm API functions to load the bitstream into PL ...

This patch adds pm_fpga_load() and pm_fpga_get_status() API's to provide
the Access to the xilfpga library to load the bitstream into zynqmp
PL region.

Signed-off-by: Nava kishore Manne <navam@xilinx.com>

zynqmp: pm: adds new pm ID to sync with PMUFW ID numbers ...

This patch adds a new pm ID to sync with PMUFW ID numbers.

Signed-off-by: Nava kishore Manne <navam@xilinx.com>

zynqmp: Initialize GIC on suspend_finish ...

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>

zynqmp: pm: Call set_wakeup_source for all wake devices on sys-suspend ...

During system suspend, identify slaves which are configured
as wake sources and call pm_set_wakeup_source API for each of them.

Identifying if device may wake the system is done by checking if any
interrupt of that device is enabled in GICD_ISENABLER when the APU is
about to enter SUSPEND_TO_RAM state. If such interrupt is found,
pm_set_wakeup_source is called with corresponding PM node ID as
argument.

Signed-off-by: Filip Drazic <filip.drazic@aggios.com>

zynqmp: pm: Add PM node IDs for GPU, PCIE, PCAP and RTC ...

Signed-off-by: Filip Drazic <filip.drazic@aggios.com>

zynqmp: pm: Provide state argument to the pm_self_suspend API call ...

The state argument of the pm_self_suspend API encodes the state to
which the APU intends to suspend. The state can be:
- PM_APU_STATE_CPU_IDLE - processor power down, all memories remain
  on
- PM_APU_STATE_SUSPEND_TO_RAM - all processors powered down, L2$
  powered down, all OCM banks in retention and DDR in
  self-refresh.
The calls for setting requirements for L2$ and OCM banks are now
redundant and removed.

Signed-off-by: Filip Drazic <filip.drazic@aggios.com>
[ sb
 - remove redundant #defines
]
Signed-off-by: Sören Brinkmann <soren.brinkmann@xilinx.com>

zynqmp: Add simple implementation of zynqmp_validate_power_state() ...

Implementation is based on arm_validate_power_state().
This function is called during CPU_SUSPEND PSCI call to validate
power_state parameter. If state is valid this function populate it
in req_state array as power domain level specific local state.
ATF platform migration guide chapter 2.2 defines this function as
mandatory for PSCIv1.0 CPU_SUSPEND support.

Signed-off-by: Stefan Krsmanovic <stefan.krsmanovic@aggios.com>

zynqmp: Increase MAX_XLAT_TABLES ...

When moving the ATF into the DRAM address space an additional
translation table is required.

Reported-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>

zynqmp: Change default BL31 address space ...

The OCM space was reorganized to use the space more efficiently. Adjust
the default ATF location to be aligned with other ZynqMP software
components.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>

zynqmp: Add RW access to L2ACTLR_EL1 and CPUACTLR_EL1 ...

Arm provided error injection support. To enable this error injection,
we need to set L2DEIEN in L2ACTLR_EL1 register and L1DEIEN in
CPUACTLR_EL1 register.

This is needed for our cortexa53 edac linux driver testing.
These registers need write access from non secure EL1 i.e linux
at the time of setting the above bits.

Signed-off-by: Naga Sureshkumar Relli <nagasure@xilinx.com>

zynqmp: Set RESET_TO_BL31 through platform.mk ...

ZynqMP only supports builds with RESET_TO_BL31=1. Set this option
through the platform makefile on default.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>

zynqmp: pm: Added NODE_IPI_RPU_0 node definition in pm_defs ...

Nodes represent IPI dedicated to the RPU (not accessible by APU)

Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com>

zynqmp: Add support for generic_delay_timer ...

Initialize the generic_delay_timer in the zynqmp port.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>

Migrate platform makefile to new console driver location ...

This patch migrates the upstream platform makefiles to include the
console drivers from the new location in ARM Trusted Firmware code
base.

Change-Id: I866d6c4951e475de1f836ce8a8c1d5e6da9577e3

Merge pull request #667 from soby-mathew/sm/PSCI_lib ...

Introduce PSCI library

Move `arm_common.c` out of aarch64 folder ...

This patch moves the `arm_common.c` file from `plat/arm/common/aarch64/`
to the parent directory since the functions implemented in the file are
not AArch64 specific. The platform makefiles are also modified for this
change.

Change-Id: I776d2e4958f59041476cf2f53a9adb5b2d304ee0

Include `plat_psci_common.c` from the new location ...

The `plat_psci_common.c` was moved to the new location `plat/common`
and a stub file was retained at previous location for compatibility. This
patch modifies the platform makefiles to include the file from the new
location.

Change-Id: Iabddeeb824e9a5d72d176d7c644735966c8c0699

zynqmp: Separate code and rodata ...

Set the SEPARATE_CODE_AND_RODATA build flag to map read-only data as
execute never.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>

ARM platforms: Add support for SEPARATE_CODE_AND_RODATA ...

The arm_setup_page_tables() function used to expect a single set of
addresses defining the extents of the whole read-only section, code
and read-only data mixed up, which was mapped as executable.

This patch changes this behaviour. arm_setup_page_tables() now
expects 2 separate sets of addresses:

 - the extents of the code section;
 - the extents of the read-only data section.

The code is mapped as executable, whereas the data is mapped as
execute-never. New #defines have been introduced to identify the
extents of the code and the read-only data section. Given that
all BL images except BL1 share the same memory layout and linker
script structure, these #defines are common across these images.
The slight memory layout differences in BL1 have been handled by
providing values specific to BL1.

Note that this patch also affects the Xilinx platform port, which
uses the arm_setup_page_tables() function. It has been updated
accordingly, such that the memory mappings on this platform are
unchanged. This is achieved by passing null values as the extents
of the read-only data section so that it is ignored. As a result,
the whole read-only section is still mapped as executable.

Fixes ARM-software/tf-issues#85

Change-Id: I1f95865c53ce6e253a01286ff56e0aa1161abac5

Introduce utils.h header file ...

This patch introduces a new header file: include/lib/utils.h.
Its purpose is to provide generic macros and helper functions that
are independent of any BL image, architecture, platform and even
not specific to Trusted Firmware.

For now, it contains only 2 macros: ARRAY_SIZE() and
IS_POWER_OF_TWO(). These were previously defined in bl_common.h and
xlat_tables.c respectively.

bl_common.h includes utils.h to retain compatibility for platforms
that relied on bl_common.h for the ARRAY_SIZE() macro. Upstream
platform ports that use this macro have been updated to include
utils.h.

Change-Id: I960450f54134f25d1710bfbdc4184f12c049a9a9

Introduce arm_setup_page_tables() function ...

This patch introduces the arm_setup_page_tables() function to
set up page tables on ARM platforms. It replaces the
arm_configure_mmu_elx() functions and does the same thing except
that it doesn't enable the MMU at the end. The idea is to reduce
the amount of per-EL code that is generated by the C preprocessor
by splitting the memory regions definitions and page tables creation
(which is generic) from the MMU enablement (which is the only per-EL
configuration).

As a consequence, the call to the enable_mmu_elx() function has been
moved up into the plat_arch_setup() hook. Any other ARM standard
platforms that use the functions `arm_configure_mmu_elx()` must be
updated.

Change-Id: I6f12a20ce4e5187b3849a8574aac841a136de83d

Merge pull request #651 from Xilinx/zynqmp_uart ...

zynqmp: Make UART selectable

zynqmp: Add option to select between Cadence UARTs ...

Add build time option 'cadence1' for ZYNQMP_CONSOLE to select the 2nd
UART available in the SoC.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>

Merge pull request #650 from Xilinx/zynqmp-updates ...

Zynqmp updates

zynqmp: pm: Added NODE_IPI_APU slave node ID in pm_defs.h ...

NODE_IPI_APU is the node ID of APU's IPI device. If APU should be
woken-up on an IPI from FPD power down, this node shall be set as
the wake-up source upon suspend.

Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com>

zynqmp: Remove double ';' ...

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>

zynqmp: Fix spelling of endianness ...

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>

zynqmp: PSCI: Wait for FW completing wake requests ...

Powering up cores didn't wait for the PMUFW to complete the request,
which could result in cores failing to power up in Linux.

Reported-by: Koteswararao Nayudu <kotin@xilinx.com>
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>