Merge pull request #988 from Leo-Yan/fix_cpu_off_v1 ...

plat: Hikey960: fix the CPU hotplug

Merge pull request #991 from davidcunado-arm/dc/update_hikey ...

hikey960: migrate to use A53 specific defines

hikey960: migrate to use A53 specific defines ...

The patch fb7d32e migrated the CPU
libraries to have unique defines, prefixing them with the CPU name.

This patch migrates the hikey960 platform port to use the A53 specific
defines.

Change-Id: Id76f544b0b236bbd4974ab5ffa1203f073c20021
Signed-off-by: David Cunado <david.cunado@arm.com>

plat: Hikey960: fix the CPU hotplug ...

In CPU off callback function, the old code uses the function
hisi_test_pwrdn_allcores() to check if all CPUs in cluster have been
powered off and if it's valid then power off the whole cluster. But the
function hisi_test_pwrdn_allcores() only maintains the different power
states only for CPU suspend/resume flow, so it cannot return correct
states for CPU on/off flow.

This patch is to change use hisi_test_cpu_down() to check if all CPUs
have been powered off, so that can power off the whole cluster properly
when all CPUs in cluster have been hotplugged off.

Signed-off-by: Tao Wang <kevin.wangtao@hisilicon.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>

Merge pull request #953 from vwadekar/tegra-misra-fixes-v1 ...

Tegra misra fixes v1

hikey960: remove mailbox driver ...

Since this mailbox driver is abandoned, remove it.

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

Unique names for defines in the CPU libraries ...

This patch makes all the defines in the CPU libraries unique,
by prefixing them with the CPU name.

NOTE: PLATFORMS USING THESE MACROS WILL HAVE TO UPDATE THEIR CODE
TO START USING THE UPDATED NAMES

Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

hikey960: fix the calculation in boardid ...

Since the type of ADC value is always unsigned int, don't
need to check the value with negative value.

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

Merge pull request #970 from vingu-linaro/enable-pmf-rt-instr-hikey ...

Enable pmf rt instr hikey

hikey960: support BL31 ...

Support BL31 on HiKey960 platform. Implement PSCI.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

hikey960: support BL2 ...

BL2 loads MCU firmware & BL31 on hikey960 platform. The MCU firmware
is used to implement low power feature.

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

hikey960: support BL1 on hikey960 platform ...

Support BL1 on HiKey960 platform. When recovery mode is detected,
BL1 loads NS BL1U that flushs images into UFS. When normal boot
mode is detected, BL1 loads BL2.

Fix for https://github.com/ARM-software/tf-issues/issues/486

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

hikey: enable PMF and instrumentations ...

enable PMF service call and instrumetion for hikey platform

Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>

Merge pull request #957 from hzhuang1/finish_hikey_psci ...

Finish hikey psci

hikey: pm: finish PSCI hook functions ...

This patch is to enable CPU suspend/resume and system level's
suspend/resume; also enable system power off state.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

hikey: bl31: enable CCI port for cluster 0 ...

The cluster 0 doesn't rely on PSCI to enable it; so enable CCI port
for cluster 0 in BL31 platform setup flow.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

hikey: fix for CPU topology ...

Fix for CPU topology so present the CPU core numbers for two clusters;
Base on this fixing, the PSCI can maintain correct power states.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

hikey: fix uninitialized variable in ddr code ...

Fix uninitliazed variable in ddr driver code.

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

hikey: support BL31 ...

Support BL31 and PSCI. Enable multiple cores in PSCI.

Change-Id: I66c39e1e9c4c45ac41a0142ed2070d79a3ac5ba3
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: Dan Handley <dan.handley@arm.com>

hikey: support BL2 ...

BL2 is used to load BL31 and SCP_BL2. In HiKey platform, SCP_BL2
is the mcu firmware that is used to scale cpu frequency and switch
low power mode.

Change-Id: I1621aa65bea989fd125ee8502fd56ef72362bf97
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: Dan Handley <dan.handley@arm.com>

hikey: support BL1 ...

Initialize regulators, pins and eMMC in BL1. Only SRAM could be used in BL1.
So BL2 will be loaded from eMMC into SRAM later.

Change-Id: I8e7ef82ffa29a3c647c9d2d2981e8759ee85d833
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: Dan Handley <dan.handley@arm.com>