SDEI: Add API for explicit dispatch ...

This allows for other EL3 components to schedule an SDEI event dispatch
to Normal world upon the next ERET. The API usage constrains are set out
in the SDEI dispatcher documentation.

Documentation to follow.

Change-Id: Id534bae0fd85afc94523490098c81f85c4e8f019
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

BL31: Add SDEI dispatcher ...

The implementation currently supports only interrupt-based SDEI events,
and supports all interfaces as defined by SDEI specification version
1.0 [1].

Introduce the build option SDEI_SUPPORT to include SDEI dispatcher in
BL31.

Update user guide and porting guide. SDEI documentation to follow.

[1] http://infocenter.arm.com/help/topic/com.arm.doc.den0054a/ARM_DEN0054A_Software_Delegated_Exception_Interface.pdf

Change-Id: I758b733084e4ea3b27ac77d0259705565842241a
Co-authored-by: Yousuf A <yousuf.sait@arm.com>
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

SPM: Fix pointer to MP info in boot info struct ...

The MP info struct is placed right after the boot info struct. However,
when calculating the address of the MP info, the size of the boot info
struct was being multiplied by the size of the MP boot info. This left
a big gap of empty space between the structs.

This didn't break any code because the boot info struct has a pointer to
the MP info struct. It was just wasting space.

Change-Id: I1668e3540d9173261968f6740623549000bd48db
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

SPM: Introduce Secure Partition Manager ...

A Secure Partition is a software execution environment instantiated in
S-EL0 that can be used to implement simple management and security
services. Since S-EL0 is an unprivileged exception level, a Secure
Partition relies on privileged firmware e.g. ARM Trusted Firmware to be
granted access to system and processor resources. Essentially, it is a
software sandbox that runs under the control of privileged software in
the Secure World and accesses the following system resources:

- Memory and device regions in the system address map.
- PE system registers.
- A range of asynchronous exceptions e.g. interrupts.
- A range of synchronous exceptions e.g. SMC function identifiers.

A Secure Partition enables privileged firmware to implement only the
absolutely essential secure services in EL3 and instantiate the rest in
a partition. Since the partition executes in S-EL0, its implementation
cannot be overly complex.

The component in ARM Trusted Firmware responsible for managing a Secure
Partition is called the Secure Partition Manager (SPM). The SPM is
responsible for the following:

- Validating and allocating resources requested by a Secure Partition.
- Implementing a well defined interface that is used for initialising a
  Secure Partition.
- Implementing a well defined interface that is used by the normal world
  and other secure services for accessing the services exported by a
  Secure Partition.
- Implementing a well defined interface that is used by a Secure
  Partition to fulfil service requests.
- Instantiating the software execution environment required by a Secure
  Partition to fulfil a service request.

Change-Id: I6f7862d6bba8732db5b73f54e789d717a35e802f
Co-authored-by: Douglas Raillard <douglas.raillard@arm.com>
Co-authored-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Co-authored-by: Achin Gupta <achin.gupta@arm.com>
Co-authored-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

spd: Use `ENABLE_ASSERTIONS` instead of `DEBUG` ...

A line in the upstream SPDs is only compiled in in `DEBUG` builds. This
line is used to help with assertions and so assertion failures can
happen in release builds with assertions enabled. Use
`ENABLE_ASSERTIONS` instead of `DEBUG`.

This bug was introduced in commit aa61368eb5, which introduced the build
option `ENABLE_ASSERTIONS`.

Change-Id: I7977df9c89c68677b00099b2a1926fa3cb0937c6
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

trusty: save/restore FPU registers in world switch ...

Currently, Trusty OS/LK implemented FPU context switch in internal
thread switch but does not implement the proper mechanism for world
switch. This commit just simply saves/restores FPU registes in world
switch to prevent FPU context from being currupted when Trusty OS uses
VFP in its applications.

It should be noted that the macro *CTX_INCLUDE_FPREGS* must be defined
in trusty.mk if Trusty OS uses VFP

Signed-off-by: Aijun Sun <aijun.sun@spreadtrum.com>

opteed: pass device tree pointer in x2 ...

Pass device tree pointer to OP-TEE in x2. bl2 is expected to fill in the
device tree pointer in args.arg3. Passing 0 means that device tree is
unavailable.

Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>

Support paging function for OPTEE. ...

ARM TF need transfer information about pageable image load address
and memory limit to OPTEE. OPTEE will relocate the pageable image
to where it's needed.
The legacy OP-TEE images that do not include header information
are not affected.

Change-Id: Id057efbbc894de7c36b2209b391febea4729c455
Signed-off-by: Edison Ai <edison.ai@arm.com>

Fix order of #includes ...

This fix modifies the order of system includes to meet the ARM TF coding
standard. There are some exceptions in order to retain header groupings,
minimise changes to imported headers, and where there are headers within
the #if and #ifndef statements.

Change-Id: I65085a142ba6a83792b26efb47df1329153f1624
Signed-off-by: Isla Mitchell <isla.mitchell@arm.com>

Tegra: enable 'signed-comparison' compilation warning/errors ...

This patch enables the 'sign-compare' flag, to enable warning/errors
for comparisons between signed/unsigned variables. The warning has
been enabled for all the Tegra platforms, to start with.

Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Migrate secure payload dispatchers to new SMC terminology ...

Since Issue B (November 2016) of the SMC Calling Convention document
standard SMC calls are renamed to yielding SMC calls to help avoid
confusion with the standard service SMC range, which remains unchanged.

http://infocenter.arm.com/help/topic/com.arm.doc.den0028b/ARM_DEN0028B_SMC_Calling_Convention.pd

A previous patch introduced a new define for yielding SMC call type.
This patch updates the secure payload dispatchers (except the TSPD) to
use this new define and also migrates the code to use the new
terminology.

Change-Id: I3d2437c04e3b21fdbd32019f55c066c87679a5bf
Signed-off-by: David Cunado <david.cunado@arm.com>

Merge pull request #925 from dp-arm/dp/spdx ...

Use SPDX license identifiers

Use SPDX license identifiers ...

To make software license auditing simpler, use SPDX[0] license
identifiers instead of duplicating the license text in every file.

NOTE: Files that have been imported by FreeBSD have not been modified.

[0]: https://spdx.org/

Change-Id: I80a00e1f641b8cc075ca5a95b10607ed9ed8761a
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

Merge pull request #919 from davidcunado-arm/dc/smc_yielding_generic ...

Update terminology: standard SMC to yielding SMC

Update terminology: standard SMC to yielding SMC ...

Since Issue B (November 2016) of the SMC Calling Convention document
standard SMC calls are renamed to yielding SMC calls to help avoid
confusion with the standard service SMC range, which remains unchanged.

http://infocenter.arm.com/help/topic/com.arm.doc.den0028b/ARM_DEN0028B_SMC_Calling_Convention.pdf

This patch adds a new define for yielding SMC call type and deprecates
the current standard SMC call type. The tsp is migrated to use this new
terminology and, additionally, the documentation and code comments are
updated to use this new terminology.

Change-Id: I0d7cc0224667ee6c050af976745f18c55906a793
Signed-off-by: David Cunado <david.cunado@arm.com>

tspd:FWU:Fix usage of SMC_RET0 ...

SMC_RET0 should only be used when the SMC code works as a function that
returns void. If the code of the SMC uses SMC_RET1 to return a value to
signify success and doesn't return anything in case of an error (or the
other way around) SMC_RET1 should always be used to return clearly
identifiable values.

This patch fixes two cases in which the code used SMC_RET0 instead of
SMC_RET1.

It also introduces the define SMC_OK to use when an SMC must return a
value to tell that it succeeded, the same way as SMC_UNK is used in case
of failure.

Change-Id: Ie4278b51559e4262aced13bbde4e844023270582
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

spd: trusty: support for AARCH64 mode ...

This patch removes support for running Trusty in the AARCH32 mode as
all platforms use it in only AARCH64 mode.

Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

spd: trusty: save context starting from the stack end ...

This patch uses the stack end to start saving the CPU context
during world switch. The previous logic, used the stack start
to save the context, thus overwriting the other members of the
context.

Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

spd: trusty: add SET_ROT_PARAMS handling ...

If Trusty is not running on the device, then Verified Boot is
not supported and the NS layer will fail gracefully later during
boot. This patch just returns success for the case when Trusty is
not running on the device and the bootloader issues SET_ROT_PARAMS
call during boot, so that we can at least boot non-Android images.

Change-Id: I40fc249983df80fb8cc5be5e4ce94c99d5b5f17d
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

tlkd: execute standard SMC calls on the boot CPU ...

This patch checks if standard SMC calls, meant for TLK, are issued
only on the boot CPU. TLK is UP Trusted OS stack and so we need this
check to avoid the NS world calling into TLK from any other CPU.

The previous check tied TLK to CPU0, but the boot CPU can be other
than CPU0 in some scenarios.

Change-Id: I75eaafa32471ce19e9920433c2f97b6b5fc02d86
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

spd: trusty: pass boot params to the Trusted OS ...

This patch passes the boot parameters, provided by the previous
bootloader, to the Trusted OS via X0, X1 and X2.

Original change by: Wayne Lin <wlin@nvidia.com>

Change-Id: I2039612a8a8226158babfd505ce8c31c4212319c
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

spd: trusty: only process one function ID at a time ...

In multi-guest trusty environment, all guest's SMCs will be
forwarded to Trusty. This change only allows 1 guest's SMC
to be forwarded at a time and returns 'busy' status to all
other requests.

Change-Id: I2144467d11e3680e28ec816adeec2766bca114d4
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

spd: trusty: pass VMID via X7 ...

According to the ARM DEN0028A spec, hypervisor ID(VMID) should be stored
in x7 (or w7). This patch gets this value from the context and passes it
to Trusty. In order to do so, introduce new macros to pass five to eight
parameters to the Trusted OS.

Change-Id: I101cf45d0712e1e880466b2274f9a48af755c9fa
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Merge pull request #847 from douglas-raillard-arm/dr/fix_abort_smc ...

Fix TSPD implementation of STD SMC ABORT

spd: trusty: OEN_TAP_START aperture for standard calls ...

This patch uses the OEN_TAP_START aperture for all the standard
calls being passed to Trusty.

Change-Id: Id78d01c7f48e4f54855600d7c789ffbfb898c541
Signed-off-by: Amith <aramachan@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Fix TSPD implementation of STD SMC ABORT ...

ABORT SMC used to return to the previously executing world, which
happened to be S-EL1 as it calls a TSP handler using synchronous entry
into the TSP.

Now properly save and restore the non-secure context (including system
registers) and return to non-secure world as it should.

fixes ARM-Software/tf-issues#453

Change-Id: Ie40c79ca2636ab8b6b2ab3106e8f49e0f9117f5f
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>

Replace some memset call by zeromem ...

Replace all use of memset by zeromem when zeroing moderately-sized
structure by applying the following transformation:
memset(x, 0, sizeof(x)) => zeromem(x, sizeof(x))

As the Trusted Firmware is compiled with -ffreestanding, it forbids the
compiler from using __builtin_memset and forces it to generate calls to
the slow memset implementation. Zeromem is a near drop in replacement
for this use case, with a more efficient implementation on both AArch32
and AArch64.

Change-Id: Ia7f3a90e888b96d056881be09f0b4d65b41aa79e
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>

Resolve build errors flagged by GCC 6.2 ...

With GCC 6.2 compiler, more C undefined behaviour is being flagged as
warnings, which result in build errors in ARM TF build.

The specific issue that this patch resolves is the use of (1 << 31),
which is predominantly used in case statements, where 1 is represented
as a signed int. When shifted to msb the behaviour is undefined.

The resolution is to specify 1 as an unsigned int using a convenience
macro ULL(). A duplicate macro MAKE_ULL() is replaced.

Fixes ARM-software/tf-issues#438

Change-Id: I08e3053bbcf4c022ee2be33a75bd0056da4073e1
Signed-off-by: David Cunado <david.cunado@arm.com>

Abort preempted TSP STD SMC after PSCI CPU suspend ...

Standard SMC requests that are handled in the secure-world by the Secure
Payload can be preempted by interrupts that must be handled in the
normal world. When the TSP is preempted the secure context is stored and
control is passed to the normal world to handle the non-secure
interrupt. Once completed the preempted secure context is restored. When
restoring the preempted context, the dispatcher assumes that the TSP
preempted context is still stored as the SECURE context by the context
management library.

However, PSCI power management operations causes synchronous entry into
TSP. This overwrites the preempted SECURE context in the context
management library. When restoring back the SECURE context, the Secure
Payload crashes because this context is not the preempted context
anymore.

This patch avoids corruption of the preempted SECURE context by aborting
any preempted SMC during PSCI power management calls. The
abort_std_smc_entry hook of the TSP is called when aborting the SMC
request.

It also exposes this feature as a FAST SMC callable from normal world to
abort preempted SMC with FID TSP_FID_ABORT.

Change-Id: I7a70347e9293f47d87b5de20484b4ffefb56b770
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>

Check Trusty is present during the SPD's initialization ...

Add a debug assertion in the initialization function of Trusty's SPD
to check for the presence of Trusty. If Trusty is absent then the SPD's
setup function already detects it and returns an error code so the init
function will never been called. Therefore, a debug assertion is enough
to catch this improbable error case.

Change-Id: Id20013e9291cdeef7827b919de2a22455f6cd9f9
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>