LuminaSensum/arm-trusted-firmware

Fork: 0

LuminaSensum / arm-trusted-firmware

History for arm-trusted-firmware / plat

2018-03-08	Unverified v1.5-rc2 16b05e9 Browse files » Merge pull request #1303 from soby-mathew/sm/fix_juno_fwu ... Juno: Fixes for firmware update davidcunado-arm authored on 8 Mar 2018 GitHub committed on 8 Mar 2018
	Unverified bf35944 Browse files » Merge pull request #1277 from hzhuang1/testing/bl2_el3_v0.6 ... hikey: migrate to BL2_EL3 davidcunado-arm authored on 8 Mar 2018 GitHub committed on 8 Mar 2018
	7b56928 Browse files » Juno: Change the Firmware update detect mechanism ... Previously, Juno used to depend on the SSC_GPRETN register to inform about the reset syndrome. This method was removed when SCP migrated to the SDS framework. But even the SDS framework doesn't report the reset syndrome correctly and hence Juno failed to enter Firmware update mode if BL2 authentication failed. In addition to that, the error code populated in V2M_SYS_NVFLAGS register does not seem to be retained any more on Juno across resets. This could be down to the motherboard firmware not doing the necessary to preserve the value. Hence this patch modifies the Juno platform to use the same mechanism to trigger firmware update as FVP which is to corrupt the FIP TOC on authentication failure. The implementation in `fvp_err.c` is made common for ARM platforms and is moved to the new `arm_err.c` file in plat/arm/common folder. The BL1 and BL2 mmap table entries for Juno are modified to allow write to the Flash memory address. Change-Id: Ica7d49a3e8a46a90efd4cf340f19fda3b549e945 Signed-off-by: Soby Mathew <soby.mathew@arm.com> Soby Mathew committed on 8 Mar 2018
2018-03-07	Unverified f5c1eed Browse files » Merge pull request #1302 from hzhuang1/fix_build ... Fix build with clang on hikey davidcunado-arm authored on 7 Mar 2018 GitHub committed on 7 Mar 2018
	74847ab Browse files » BL2U: Fix ARM platform timer initilization ... This issue was detected when testing FWU on Juno. The Timer `timer_ops` was not being initialized before being used by the SDS driver on Juno. This patch adds the call to `generic_delay_timer_init()` during bl2u_early_platform_setup(). This is done generically for all ARM platforms because the cost involved is minimal. Change-Id: I349cf0bd1db68406eb2298b65f9c729f792cabdc Signed-off-by: Soby Mathew <soby.mathew@arm.com> Soby Mathew committed on 7 Mar 2018
	Unverified dbf9f28 Browse files » Merge pull request #1239 from arve-android/trusty-fixes ... Trusty fixes davidcunado-arm authored on 7 Mar 2018 GitHub committed on 7 Mar 2018
2018-03-06	84b589c Browse files » hikey: fix build issue with CLANG ... plat/hisilicon/hikey/hikey_bl1_setup.c:565:47: error: value size does not match register size specified by the constraint and modifier [-Werror,-Wasm-operand-widths] __asm__ volatile ("mrs %0, cpacr_el1" : "=r"(data)); Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Haojian Zhuang committed on 6 Mar 2018
2018-03-06	056b3d4 Browse files » hikey960: fix build issue with CLANG ... plat/hisilicon/hikey960/drivers/pwrc/hisi_pwrc.c:290:20: error: unused function 'hisi_pdc_set_intmask' [-Werror,-Wunused-function] static inline void hisi_pdc_set_intmask(void pdc_base_addr, ^ 1 error generated. Makefile:605: recipe for target 'build/hikey960/release/bl31/hisi_pwrc.o' failed make: ** [build/hikey960/release/bl31/hisi_pwrc.o] Error 1 Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Haojian Zhuang committed on 6 Mar 2018
2018-03-05	Unverified eb4ff4c Browse files » Merge pull request #1288 from michpappas/tf-issues#558_qemu_separate_code_and_data ... qemu: Support SEPARATE_CODE_AND_RODATA davidcunado-arm authored on 5 Mar 2018 GitHub committed on 5 Mar 2018
	Unverified db0a68f Browse files » Merge pull request #1298 from michpappas/tf-issues#560_qemu_UART1_data_abort ... qemu: Accessing UART1 causes a data abort davidcunado-arm authored on 5 Mar 2018 GitHub committed on 5 Mar 2018
	4e858ba Browse files » hikey960: move out duplicated code ... Create hikey960_bl_common.c to store duplication initialization code in both BL1 and BL2. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Haojian Zhuang committed on 5 Mar 2018
	19b731e Browse files » hikey960: fix invoking driver init in image load driver ... It's unnecessary to call platform driver initialization in image load driver. We could make bl2_platform_setup() to executing just before SCP_BL2 by setting flag IMAGE_ATTRIB_PLAT_SETUP. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Haojian Zhuang committed on 5 Mar 2018
	d212873 Browse files » hikey960: migrate to bl2_el3 ... Since non-TF ROM is used in HiKey960 platform (Hisilicon Hi3660 SoC), replace BL1 by BL2_EL3 in normal boot mode. When flush images in recovery mode, keep to use BL1. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Haojian Zhuang committed on 5 Mar 2018
	99ffcaf Browse files » hikey960: drop LOAD_IMAGE v1 ... Since LOAD_IMAGE_V2 is always enabled in HiKey960 platform. Drop LOAD_IMAGE v1 to simplify code. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Haojian Zhuang committed on 5 Mar 2018
	8495c03 Browse files » hikey960: fix memory overlapped in memory map ... MAP_TSP_MEM could be either in SRAM or DRAM. When MAP_TSP_MEM is in DRAM, it's overlapped with MAP_DDR. Since TSP_MEM is always configured in DRAM case, it means MAP_OPTEE_PAGEABLE is always disabled. Just remove it. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Haojian Zhuang committed on 5 Mar 2018
	17cf8ab Browse files » hikey960: avoid to dump message when fetch boardid ... The main difference between HiKey960 v1 hardware and HiKey960 v2 hardware is on UART console. But the function of detecting boardid dumps message before console ready. So fix it by removing those messages. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Haojian Zhuang committed on 5 Mar 2018
	054c3e0 Browse files » hikey: move out duplicated code ... Create hikey_bl_common.c to store duplicated initialization code in BL1 and BL2. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Haojian Zhuang committed on 5 Mar 2018
2018-03-04	a628b1a Browse files » hikey: migrate to bl2_el3 ... Since non-TF ROM is used in HiKey platform (Hisilicon Hi6220 SoC), replace BL1 by BL2_EL3 in normal boot mode. When we recovery images in recovery mode, keep to use BL1. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Haojian Zhuang committed on 4 Mar 2018
	a9b3021 Browse files » hikey: clean dcache for SRAM after initialized ... Although SRAM is initialized, DCACHE should be cleaned too. Because MCU is a parrallel core to access SRAM. We need to make sure that initialized value is really written to SRAM before MCU using it. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Haojian Zhuang committed on 4 Mar 2018
	103c213 Browse files » hikey: drop LOAD_IMAGE v1 ... Since LOAD_IMAGE_V2 is always enabled in HiKey platform. Drop LOAD_IMAGE v1 to simplify code. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Haojian Zhuang committed on 4 Mar 2018
	c5c7538 Browse files » qemu: Accessing UART1 causes a data abort ... The register address range of UART1 (crash console) are outside the address ranges mapped for MMIO, resulting to an MMU abort when the device registers are accessed. Increase the size of DEVICE1 memory to include the range of UART1. Fixes ARM-software/tf-issues#560 Signed-off-by: Michalis Pappas <mpappas@fastmail.fm> Michalis Pappas committed on 4 Mar 2018
2018-03-03	Unverified c37be00 Browse files » Merge pull request #1292 from danh-arm/dh/spurious-dep-warn ... Suppress spurious deprecated declaration warnings davidcunado-arm authored on 3 Mar 2018 GitHub committed on 3 Mar 2018
2018-03-02	Unverified 06e3a5e Browse files » Merge pull request #1297 from soby-mathew/sm/fix_aarch32_plat_cmn ... Remove sp_min functions from plat_common.c davidcunado-arm authored on 2 Mar 2018 GitHub committed on 2 Mar 2018
	0ed8c00 Browse files » Remove sp_min functions from plat_common.c ... This patch removes default platform implementations of sp_min platform APIs from plat/common/aarch32/plat_common.c. The APIs are now implemented in `plat_sp_min_common.c` file within the same folder. The ARM platform layer had a weak definition of sp_min_platform_setup2() which conflicted with the weak definition in the common file. Hence this patch fixes that by introducing a `plat_arm_` version of the API thus allowing individual boards within ARM platforms to override it if they wish to. Fixes ARM-software/tf-issues#559 Change-Id: I11a74ecae8191878ccc7ea03f12bdd5ae88faba5 Signed-off-by: Soby Mathew <soby.mathew@arm.com> Soby Mathew committed on 2 Mar 2018
	d0c63ea Browse files » Fix FVP DRAM2 size ... This was correct according to the model specifications , but it seems that FVP doesn't implement it. It is safer to use the size exposed by the DTB which is currently used by Linux. Change-Id: I9aabe3284a50ec2a36ed94966eb7e4ddf37cec3b Signed-off-by: Roberto Vargas <roberto.vargas@arm.com> Roberto Vargas committed on 2 Mar 2018
2018-03-01	97924e4 Browse files » Suppress spurious deprecated declaration warnings ... Some generic compatibility functions emit deprecated declaration warnings even when platforms do not use the deprecated functions directly. This can be confusing. Suppress these warnings by using: `#pragma GCC diagnostic ignored "-Wdeprecated-declarations"` Also emit a runtime warning if the weak plat/common implemntation of plat_get_syscnt_freq2() is used, as this implies the platform has not migrated from plat_get_syscnt_freq(). The deprecated declaration warnings only help detect when platforms are calling deprecated functions, not when they are defining deprecated functions. Fixes ARM-software/tf-issues#550 Change-Id: Id14a92279c2634c1e76db8ef210da8affdbb2a5d Signed-off-by: Dan Handley <dan.handley@arm.com> Dan Handley committed on 1 Mar 2018
2018-02-28	Unverified fdcc08a Browse files » Merge pull request #1290 from jeenu-arm/dynamiq ... DynamIQ on FVP davidcunado-arm authored on 28 Feb 2018 GitHub committed on 28 Feb 2018
	Unverified 73a9605 Browse files » Merge pull request #1282 from robertovargas-arm/misra-changes ... Misra changes davidcunado-arm authored on 28 Feb 2018 GitHub committed on 28 Feb 2018
	fd116b9 Browse files » Fix MISRA rule 8.4 Part 2 ... Rule 8.4: A compatible declaration shall be visible when an object or function with external linkage is defined Fixed for: make DEBUG=1 PLAT=juno LOG_LEVEL=50 all Change-Id: Ic8f611da734f356566e8208053296e6c62b54709 Signed-off-by: Roberto Vargas <roberto.vargas@arm.com> Roberto Vargas committed on 28 Feb 2018
	1af540e Browse files » Fix MISRA rule 8.4 Part 1 ... Rule 8.4: A compatible declaration shall be visible when an object or function with external linkage is defined Fixed for: make DEBUG=1 PLAT=fvp LOG_LEVEL=50 all Change-Id: I7c2ad3f5c015411c202605851240d5347e4cc8c7 Signed-off-by: Roberto Vargas <roberto.vargas@arm.com> Roberto Vargas committed on 28 Feb 2018