LuminaSensum/arm-trusted-firmware

Fork: 0

LuminaSensum / arm-trusted-firmware

History for arm-trusted-firmware / docs

2018-07-18	939e085 Browse files » docs: Add Marvell build and porting documents ... Change-Id: I341440701b7e5e3555e604dd9d0a356795e6c4fb Signed-off-by: Hanna Hawa <hannah@marvell.com> Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Konstantin Porotchkin committed on 18 Jul 2018
2018-07-18	c0474d5 Browse files » marvell: drivers: Add address decoding units drivers ... Add address decoding unit drivers for Marvell SoCs. Address decoding flow and address translation units chart are located at docs/marvell/misc/mvebu-a8k-addr-map.txt Change-Id: Id6ce311fa1f4f112df3adfac5d20449f495f71ed Signed-off-by: Hanna Hawa <hannah@marvell.com> Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Konstantin Porotchkin committed on 18 Jul 2018
2018-07-16	aa49bde Browse files » rpi3: Move NS-DRAM out of the protected region ... The Non-secure DRAM region shouldn't be protected in the range specified in the Linux command line with memmap. This change also increases the size of the Secure DRAM region. Change-Id: I306e9e443a84b834c99739f54a534a3ca3be2424 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com> Antonio Nino Diaz committed on 16 Jul 2018
	97fb05e Browse files » rpi3: Switch addresses of kernel and DTB ... In the memory map of the documentation the kernel only had 16MiB of allocated space. This leaves very little room for growth, so the addresses of the DTB and the kernel have been interchanged. The documentation has been updated to reflect this change. Change-Id: Ib6eab69f047fa88561fb755397ce3a0b356c8860 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com> Antonio Nino Diaz committed on 16 Jul 2018
	5e2e024 Browse files » rpi3: Update documentation ... Add information about direct Linux kernel boot for kernels that support PSCI. Change-Id: I05f76aa36398edabf411cb25a646437af1862e6e Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com> Antonio Nino Diaz committed on 16 Jul 2018
	1aad932 Browse files » rpi3: Add support for the stack protector ... It uses the hardware RNG in a similar way as Juno (it gets 128 bits of entropy and does xor on them). It is disabled by default. Change-Id: I8b3adb61f5a5623716e0e8b6799404c68dd94c60 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com> Antonio Nino Diaz committed on 16 Jul 2018
	98967fb Browse files » rpi3: Remove broken support of RESET_TO_BL31 ... There is no way to boot BL31 at the addresses specified in the platform memory map unless an extra loader is used at address 0x00000000. It is better to remove it to prevent confusion. Having it enabled was a bug. Change-Id: I3229fbc080f5996cff47efce8e799bae94e0d5cb Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com> Antonio Nino Diaz committed on 16 Jul 2018
2018-07-13	64fe343 Browse files » rpi3: Concatenate BL1 and FIP automatically ... Add a new default makefile target to concatenate BL1 and the FIP and generate armstub8.bin. This way it isn't needed to do it manually. Documentation updated to reflect the changes. Change-Id: Id5b5b1b7b9f87767db63fd01180ddfea855a7207 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com> Antonio Nino Diaz committed on 13 Jul 2018
2018-07-12	Unverified 6e779ac Browse files » Merge pull request #1476 from grandpaul/paulliu-rpi3-modify-size ... rpi3: enlarge SEC_DRAM0_SIZE for optee_test to pass Dimitris Papastamos authored on 12 Jul 2018 GitHub committed on 12 Jul 2018
2018-07-12	8ebf806 Browse files » rpi3: enlarge SEC_DRAM0_SIZE for optee_test to pass ... Running optee_test failed because SEC_DRAM0_SIZE is too small. Previous is 2 MB. We enlarge it to 11 MB for passing the test. Also we reduce the NS_DRAM0_SIZE from 13MB to 4MB so that the whole section is still fit in 16MB. This commit also modified the document to reflect the changes we've made in code. Tested-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com> Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org> Ying-Chun Liu (PaulLiu) committed on 12 Jul 2018
2018-07-11	d35de55 Browse files » rpi3: Implement simple interrupt routing ... Implement minimal interrupt routing functions. All interrupts are treated as non-secure interrupts to be handled by the non-secure world. Add note to the documentation about disabling FIQs qhen using OP-TEE with Linux. Change-Id: I937096542d973925e43ae946c5d0b306d0d95a94 Tested-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com> Antonio Nino Diaz committed on 11 Jul 2018
	Unverified 9a93d8c Browse files » Merge pull request #1460 from robertovargas-arm/clang ... Make TF compatible with Clang assembler and linker Dimitris Papastamos authored on 11 Jul 2018 GitHub committed on 11 Jul 2018
	4a98f0e Browse files » Update documentation about how to use clang toolchain ... Change-Id: Ie65eb779b048940cf32ed5744ff40610b3c5499d Signed-off-by: Roberto Vargas <roberto.vargas@arm.com> Roberto Vargas committed on 11 Jul 2018
	00b7db3 Browse files » Add documentation about clang version supported ... The user guide didn't contain any information about the requirements of the clang version needed by TF, which is at least 4.0. Change-Id: I1ea120aca0fb2c0950fbeaf6978c654ec277afde Signed-off-by: Roberto Vargas <roberto.vargas@arm.com> Roberto Vargas committed on 11 Jul 2018
2018-07-10	befcbdf Browse files » Added device-tree-compiler to the list of packages ... Change-Id: Ia7800dae52f152b2c3a3b41f1078ab7499d2f4b6 Signed-off-by: Sathees Balya <sathees.balya@arm.com> Sathees Balya committed on 10 Jul 2018
2018-07-06	Unverified b6c07bb Browse files » Merge pull request #1463 from grandpaul/paulliu-rpi3-tbb0 ... rpi3: Add support for Trusted Board Boot Dimitris Papastamos authored on 6 Jul 2018 GitHub committed on 6 Jul 2018
2018-07-05	Unverified 0a15eb9 Browse files » Merge pull request #1465 from Andre-ARM/allwinner/h6-support ... allwinner: Add H6 SoC support Dimitris Papastamos authored on 5 Jul 2018 GitHub committed on 5 Jul 2018
	ebbdbb1 Browse files » docs: rpi3: add description for Trusted Board Boot ... Add paragraph for how to enable Trusted Board Boot for rpi3 Tested-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com> Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Ying-Chun Liu (PaulLiu) committed on 5 Jul 2018
	6a2c3c7 Browse files » docs: rpi3: fix the size of BL1 ... For Trusted Board Boot we enlarge the BL1 size from 64k to 128k. Tested-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com> Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org> Ying-Chun Liu (PaulLiu) committed on 5 Jul 2018
2018-07-04	Unverified 5775b9e Browse files » Merge pull request #1461 from antonio-nino-diaz-arm/an/xlat-docs ... xlat v2: Update documentation Dimitris Papastamos authored on 4 Jul 2018 GitHub committed on 4 Jul 2018
2018-07-03	bed42a5 Browse files » allwinner: Add Allwinner H6 SoC support ... The H6 is Allwinner's most recent SoC. It shares most peripherals with the other ARMv8 Allwinner SoCs (A64/H5), but has a completely different memory map. Introduce a separate platform target, which includes a different header file to cater for the address differences. Also add the new build target to the documentation. The new ATF platform name is "sun50i_h6". Signed-off-by: Andre Przywara <andre.przywara@arm.com> Andre Przywara committed on 3 Jul 2018
2018-07-03	5cff882 Browse files » xlat v2: Update documentation ... Update documentation to reflect the current state of the library. Change-Id: Ic72f90ee322d2ebd6ea7f4296315700d6bc434e6 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com> Antonio Nino Diaz committed on 3 Jul 2018
2018-06-28	2dde1f5 Browse files » allwinner: doc: add missing paragraphs ... Add two empty lines to denote the paragraphs properly and improve readability. Reported-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Andre Przywara committed on 28 Jun 2018
2018-06-28	dab901f Browse files » allwinner: Add BL32 (corresponds to Trusted OS) support ... This patch is an attempt to run Trusted OS (OP-TEE OS being one of them) along side BL31 image. ATF supports multiple SPD's that can take dispatcher name (opteed for OP-TEE OS) as an input using the 'SPD=<dispatcher name>' option during bl31 build. Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com> Amit Singh Tomar authored on 19 Jun 2018 Andre Przywara committed on 28 Jun 2018
2018-06-27	Unverified d48f193 Browse files » Merge pull request #1429 from jeenu-arm/mmu-direct ... Enable MMU without stack for xlat v2/DynamIQ Dimitris Papastamos authored on 27 Jun 2018 GitHub committed on 27 Jun 2018
2018-06-27	64ee263 Browse files » DynamIQ: Enable MMU without using stack ... Having an active stack while enabling MMU has shown coherency problems. This patch builds on top of translation library changes that introduces MMU-enabling without using stacks. Previously, with HW_ASSISTED_COHERENCY, data caches were disabled while enabling MMU only because of active stack. Now that we can enable MMU without using stack, we can enable both MMU and data caches at the same time. NOTE: Since this feature depends on using translation table library v2, disallow using translation table library v1 with HW_ASSISTED_COHERENCY. Fixes ARM-software/tf-issues#566 Change-Id: Ie55aba0c23ee9c5109eb3454cb8fa45d74f8bbb2 Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com> Jeenu Viswambharan committed on 27 Jun 2018
2018-06-26	3208edc Browse files » ARM platforms: Initialize cntfrq for BL1 Firmware update ... Currenly the CNTFRQ register and system timer is initialized in BL31 for use by the normal world. During firmware update, the NS-BL1 or NS-BL2U may need to access the system timer. Hence this patch duplicates the CNTFRQ and system timer initialization in BL1 as well. Signed-off-by: Soby Mathew <soby.mathew@arm.com> Change-Id: I1ede78b4ae64080fb418cb93f3e48b26d7b724dc Soby Mathew committed on 26 Jun 2018
2018-06-22	677ad32 Browse files » Fix typos in documentation ... In the porting guide, there are blue boxes that describe the argument types and the return type of each function. A small typo caused some of these boxes not being properly rendered. In the user guide, small typos were fixed that caused random text being unintentionally rendered as bold. Also, a slight rewording was done in the section describing the DYN_DISABLE_AUTH flag. Change-Id: I57303ca609436a82162fa9b42c06b0d5a63da6df Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com> John Tsichritzis committed on 22 Jun 2018
	Unverified 9dfd755 Browse files » Merge pull request #1437 from jeenu-arm/ras-remaining ... SDEI dispatch changes to enable RAS use cases Dimitris Papastamos authored on 22 Jun 2018 GitHub committed on 22 Jun 2018
	Unverified 826469b Browse files » Merge pull request #1440 from antonio-nino-diaz-arm/an/xlat-enums ... xlat: Remove mmap_attr_t enum type Dimitris Papastamos authored on 22 Jun 2018 GitHub committed on 22 Jun 2018