2018-07-18 |
marvell: drivers: Add thermal driver
...
Add thermal driver for A8K SoC family.
The termal unit data is used by Marvell DRAM initialization
code for optimizing the memory controller configuration
Change-Id: Iad92689fa6e4224a89d872e9aa015393abd9cf73
Signed-off-by: Hanna Hawa <hannah@marvell.com>
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Konstantin Porotchkin
committed
on 18 Jul 2018
|
marvell: drivers: Add L3/system cache management drivers
...
Add LLC (L3) cache management drivers for Marvell SoCs
AP806, AP807 and AP810
Change-Id: Ic70710f9bc5b6b48395d62212df7011e2fbb5894
Signed-off-by: Hanna Hawa <hannah@marvell.com>
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Konstantin Porotchkin
committed
on 18 Jul 2018
|
marvell: drivers: Add MoChi drivers
...
Add ModularChip and MCI drivers for A8K SoC family.
ModularChip drivers include support for the internal building
blocks of Marvell ARMADA SoCs - APN806, APN807 and CP110
Change-Id: I9559343788fa2e5eb47e6384a4a7d47408787c02
Signed-off-by: Hanna Hawa <hannah@marvell.com>
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Konstantin Porotchkin
committed
on 18 Jul 2018
|
marvell: drivers: Add address decoding units drivers
...
Add address decoding unit drivers for Marvell SoCs.
Address decoding flow and address translation units chart
are located at docs/marvell/misc/mvebu-a8k-addr-map.txt
Change-Id: Id6ce311fa1f4f112df3adfac5d20449f495f71ed
Signed-off-by: Hanna Hawa <hannah@marvell.com>
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Konstantin Porotchkin
committed
on 18 Jul 2018
|
2018-07-03 |
Add MMC framework
...
This change is largely based on existing eMMC framework by Haojian Zhuang
(@hzhuang1).
The MMC framework supports both eMMC and SD card devices. It was
written as a new framework since breaking few eMMC framework APIs.
At card probe and after the reset to idle command (CMD0), a Send
Interface Condition Command is sent (CMD8) to distinguish between
eMMC and SD card devices. eMMC devices go through the same
sequence as in the former eMMC framework. Else the framework
uses commands dedicated to SD-cards for init or frequency switch.
A structure is created to share info with the driver. It stores:
- the MMC type (eMMC, SD or SD HC)
- the device size
- the max frequency supported by the device
- the block size: 512 for eMMC and SD-HC and read from CSD
structure for older SD-cards
Restriction to align buffers on block size has been removed.
Cache maintenance was removed and is expected to be done in the platform
or device driver.
The MMC framework includes some MISRA compliance coding style
maybe not yet ported in the existing eMMC framework.
Fixes ARM-software/tf-issues#597
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Yann Gautier
committed
on 3 Jul 2018
|
2018-06-19 |
Merge pull request #1418 from antonio-nino-diaz-arm/an/arm-multi-console
...
plat/arm: Migrate AArch64 port to the multi console driver
Dimitris Papastamos
authored
on 19 Jun 2018
GitHub
committed
on 19 Jun 2018
|
plat/arm: Migrate AArch64 port to the multi console driver
...
The old API is deprecated and will eventually be removed.
Arm platforms now use the multi console driver for boot and runtime
consoles. However, the crash console uses the direct console API because
it doesn't need any memory access to work. This makes it more robust
during crashes.
The AArch32 port of the Trusted Firmware doesn't support this new API
yet, so it is only enabled in AArch64 builds. Because of this, the
common code must maintain compatibility with both systems. SP_MIN
doesn't have to be updated because it's only used in AArch32 builds.
The TSP is only used in AArch64, so it only needs to support the new
API without keeping support for the old one.
Special care must be taken because of PSCI_SYSTEM_SUSPEND. In Juno, this
causes the UARTs to reset (except for the one used by the TSP). This
means that they must be unregistered when suspending and re-registered
when resuming. This wasn't a problem with the old driver because it just
restarted the UART, and there were no problems associated with
registering and unregistering consoles.
The size reserved for BL2 has been increased.
Change-Id: Icefd117dd1eb9c498921181a21318c2d2435c441
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 19 Jun 2018
|
2018-06-11 |
drivers: ti: uart: Add TI specific 16550 initialization
...
On TI platforms the UART is disabled by default and must be explicitly
enabled using the MDR1 register.
NOTE: The original definition of
http://www.ti.com/lit/ds/symlink/pc16550d.pdf has no MDR register, but
many TI SoCs implementing 16550 do have a quirky MDR register
implemented. So, this should be enabled with TI_16550_MDR_QUIRK
NOTE: In such implementation, the CSR register does not exist.
Signed-off-by: Benjamin Fair <b-fair@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Benjamin Fair
authored
on 13 Oct 2016
Andrew F. Davis
committed
on 11 Jun 2018
|
2018-05-17 |
Ensure read and write of flags are 32 bit
...
In 'console_set_scope' and when registering a console, field 'flags' of
'console_t' is assigned a 32-bit value. However, when it is actually
used, the functions perform 64-bit reads to access its value. This patch
changes all 64-bit reads to 32-bit reads.
Change-Id: I181349371409e60065335f078857946fa3c32dc1
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
Daniel Boulby
committed
on 17 May 2018
|
2018-05-15 |
Revert "plat/arm: Migrate AArch64 port to the multi console driver"
...
This reverts commit 2f18aa1 .
It is causing some tests to fail. Until the cause is found and fixed, it
is needed to remove this commit from master.
Change-Id: Ic5ff7a841903a15613e00379e87cbbd8a0e85152
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 15 May 2018
|
2018-05-11 |
plat/arm: Migrate AArch64 port to the multi console driver
...
The old API is deprecated and will eventually be removed.
Arm platforms now use the multi console driver for boot and runtime
consoles. However, the crash console uses the direct console API because
it doesn't need any memory access to work. This makes it more robust
during crashes.
The AArch32 port of the Trusted Firmware doesn't support this new API
yet, so it is only enabled in AArch64 builds. Because of this, the
common code must maintain compatibility with both systems. SP_MIN
doesn't have to be updated because it's only used in AArch32 builds.
The TSP is only used in AArch64, so it only needs to support the new
API without keeping support for the old one.
Special care must be taken because of PSCI_SYSTEM_SUSPEND. In Juno, this
causes the UARTs to reset (except for the one used by the TSP). This
means that they must be unregistered when suspending and re-registered
when resuming. This wasn't a problem with the old driver because it just
restarted the UART, and there were no problems associated with
registering and unregistering consoles.
The size of BL31 has been increased in builds with SPM.
Change-Id: Icefd117dd1eb9c498921181a21318c2d2435c441
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 11 May 2018
|
multi console: Assert that consoles aren't registered twice
...
In the multi console driver, allowing to register the same console more
than once may result in an infinte loop when putc is called.
If, for example, a boot message is trying to be printed, but the
consoles in the loop in the linked list are runtime consoles, putc will
iterate forever looking for a console that can print boot messages (or
a NULL pointer that will never come).
This loop in the linked list can occur after restoring the system from a
system suspend. The boot console is registered during the cold boot in
BL31, but the runtime console is registered even in the warm boot path.
Consoles are always added to the start of the linked list when they are
registered, so this it what should happen if they were actually
different structures:
console_list -> NULL
console_list -> BOOT -> NULL
console_list -> RUNTIME -> BOOT -> NULL
console_list -> RUNTIME -> RUNTIME -> BOOT -> NULL
In practice, the two runtime consoles are the same one, so they create
this loop:
console_list -> RUNTIME -. X -> BOOT -> NULL
^ |
`----'
This patch adds an assertion to detect this problem. The assertion will
fail whenever the same structure tries to be registered while being on
the list.
In order to assert this, console_is_registered() has been implemented.
It returns 1 if the specified console is registered, 0 if not.
Change-Id: I922485e743775ca9bd1af9cbd491ddd360526a6d
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 11 May 2018
|
2018-04-16 |
Merge pull request #1356 from robertovargas-arm/misra-changes
...
Misra changes
Dimitris Papastamos
authored
on 16 Apr 2018
GitHub
committed
on 16 Apr 2018
|
2018-04-13 |
Fix MISRA rule 8.4 Part 4
...
Rule 8.4: A compatible declaration shall be visible when
an object or function with external linkage is defined
Fixed for:
make DEBUG=1 PLAT=fvp SPD=tspd TRUSTED_BOARD_BOOT=1 \
GENERATE_COT=1 ARM_ROTPK_LOCATION=devel_rsa \
ROT_KEY=arm_rotprivk_rsa.pem MBEDTLS_DIR=mbedtls all
Change-Id: Ie4cd6011b3e4fdcdd94ccb97a7e941f3b5b7aeb8
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
Roberto Vargas
committed
on 13 Apr 2018
|
Fix MISRA rule 8.3 Part 4
...
Rule 8.3: All declarations of an object or function shall
use the same names and type qualifiers
Fixed for:
make DEBUG=1 PLAT=fvp SPD=tspd TRUSTED_BOARD_BOOT=1 \
GENERATE_COT=1 ARM_ROTPK_LOCATION=devel_rsa \
ROT_KEY=arm_rotprivk_rsa.pem MBEDTLS_DIR=mbedtls all
Change-Id: Ia34fe1ae1f142e89c9a6c19831e3daf4d28f5831
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
Roberto Vargas
committed
on 13 Apr 2018
|
2018-04-09 |
DMC500: Add platform support to set system interface count
...
Some low end platforms using DMC500 memory controller do not have
CCI(Cache Coherent Interconnect) interface and only have non-coherent
system interface support. Hence this patch makes the system interface
count configurable from the platforms.
Change-Id: I6d54c90eb72fd18026c6470c1f7fd26c59dc4b9a
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Amit Daniel Kachhap
committed
on 9 Apr 2018
|
2018-04-03 |
Merge pull request #1334 from michpappas/tf-issues#572_qemu_dont_use_C_for_crash_console
...
qemu: don't use C functions for the crash console callbacks
Dimitris Papastamos
authored
on 3 Apr 2018
GitHub
committed
on 3 Apr 2018
|
2018-03-31 |
qemu: don't use C functions for the crash console callbacks
...
Use the console_pl011_core_* functions directly in the crash console
callbacks.
This bypasses the MULTI_CONSOLE_API for the crash console (UART1), but
allows using the crash console before the C runtime has been initialized
(eg to call ASM_ASSERT). This retains backwards compatibility with respect
to functionality when the old API is used.
Use the MULTI_CONSOLE_API to register UART0 as the boot and runtime
console.
Fixes ARM-software/tf-issues#572
Signed-off-by: Michalis Pappas <mpappas@fastmail.fm>
Michalis Pappas
committed
on 31 Mar 2018
|
2018-03-29 |
Merge pull request #1333 from jeenu-arm/icfg-fix
...
GIC: Fix interrupt setting interrupt configuration
Dimitris Papastamos
authored
on 29 Mar 2018
GitHub
committed
on 29 Mar 2018
|
2018-03-26 |
GIC: Fix setting interrupt configuration
...
- Interrupt configuration is a 2-bit field, so the field shift has to
be double that of the bit number.
- Interrupt configuration (level- or edge-trigger) is specified in the
MSB of the field, not LSB.
Fixes applied to both GICv2 and GICv3 drivers.
Fixes ARM-software/tf-issues#570
Change-Id: Ia6ae6ed9ba9fb0e3eb0f921a833af48e365ba359
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
Jeenu Viswambharan
committed
on 26 Mar 2018
|
2018-03-24 |
qemu: MULTI_CONSOLE_API=0 causes build error
...
Add crash_console_init declaration to console.h
Only enable MULTI_CONSOLE_API for AArch64
Fixes ARM-software/tf-issues#571
Signed-off-by: Michalis Pappas <mpappas@fastmail.fm>
Michalis Pappas
committed
on 24 Mar 2018
|
2018-03-01 |
Emit warnings when using deprecated GIC init
...
Emit runtime warnings when intializing the GIC drivers using the
deprecated method of defining integer interrupt arrays in the GIC driver
data structures; interrupt_prop_t arrays should be used instead. This
helps platforms detect that they have migration work to do. Previously,
no warning was emitted in this case. This affects both the GICv2 and GICv3
drivers.
Also use the __deprecated attribute to emit a build time warning if these
deprecated fields are used. These warnings are suppressed in the GIC
driver compatibility functions but will be visible if platforms use them.
Change-Id: I6b6b8f6c3b4920c448b6dcb82fc18442cfdf6c7a
Signed-off-by: Dan Handley <dan.handley@arm.com>
Dan Handley
committed
on 1 Mar 2018
|
Improve MULTI_CONSOLE_API deprecation warnings
...
For platforms that have not migrated to MULTI_CONSOLE_API == 1, there
are a lot of confusing deprecated declaration warnings relating to
use of console_init() and console_uninit(). Some of these relate to use
by the generic code, not the platform code. These functions are not really
deprecated but *removed* when MULTI_CONSOLE_API == 1.
This patch consolidates these warnings into a single preprocessor warning.
The __deprecated attribute is removed from the console_init() and
console_uninit() declarations.
For preprocessor warnings like this to not cause fatal build errors,
this patch adds -Wno-error=cpp to the build flags when
ERROR_DEPRECATED == 0.
This option (and -Wno-error=deprecated-declarations) is now added to
CPPFLAGS instead of TF_CFLAGS to ensure the build flags are used in the
assembler as well as the compiler.
This patch also disentangles the MULTI_CONSOLE_API and ERROR_DEPRECATED
build flags by defaulting MULTI_CONSOLE_API to 0 instead of
ERROR_DEPRECATED. This allows platforms that have not migrated to
MULTI_CONSOLE_API to use ERROR_DEPRECATED == 1 to emit a more meaningful
build error.
Finally, this patch bans use of MULTI_CONSOLE_API == 1 and AARCH32, since
the AArch32 console implementation does not support
MULTI_CONSOLE_API == 1.
Change-Id: If762165ddcb90c28aa7a4951aba70cb15c2b709c
Signed-off-by: Dan Handley <dan.handley@arm.com>
Dan Handley
committed
on 1 Mar 2018
|
2018-02-28 |
Fix MISRA rule 8.3 Part 1
...
Rule 8.3: All declarations of an object or function shall
use the same names and type qualifiers.
Fixed for:
make DEBUG=1 PLAT=fvp LOG_LEVEL=50 all
Change-Id: I48201c9ef022f6bd42ea8644529afce70f9b3f22
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
Roberto Vargas
committed
on 28 Feb 2018
|
Fix MISRA rule 8.3 in common code
...
Rule 8.3: All declarations of an object or function shall
use the same names and type qualifiers.
Change-Id: Iff384187c74a598a4e73f350a1893b60e9d16cec
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
Roberto Vargas
committed
on 28 Feb 2018
|
2018-02-23 |
drivers:ufs: fix hynix ufs bug with quirk on hi36xx SoC
...
Hynix ufs has deviations on hi36xx platform which will result
in ufs bursts transfer failures at a very low probability.
To fix the problem, the Hynix device must set the register
VS_DebugSaveConfigTime to 0x10, which will set time reference
for SaveConfigTime is 250 ns. The time reference for SaveConfigTime
is 40 ns by default.
Signed-off-by: fengbaopeng <fengbaopeng@hisilicon.com>
fengbaopeng
authored
on 12 Feb 2018
wei li
committed
on 23 Feb 2018
|
2018-01-24 |
Merge pull request #1193 from jwerner-chromium/JW_coreboot
...
New console API and coreboot support [v4]
davidcunado-arm
authored
on 24 Jan 2018
GitHub
committed
on 24 Jan 2018
|
2018-01-19 |
coreboot: Add support for CBMEM console
...
coreboot supports an in-memory console to store firmware logs even when
no serial console is available. It is widely supported by
coreboot-compatible bootloaders (including SeaBIOS and GRUB) and can be
read by the Linux kernel.
This patch allows BL31 to add its own log messages to this console. The
driver will be registered automatically if coreboot support is compiled
in and detects the presence of a console buffer in the coreboot tables.
Change-Id: I31254dfa0c2fdeb7454634134b5707b4b4154907
Signed-off-by: Julius Werner <jwerner@chromium.org>
Julius Werner
committed
on 19 Jan 2018
|
drivers: cadence: cdns: Update CDNS driver to support MULTI_CONSOLE_API
...
This patch updates the Cadence CDNS console driver to support the new
console API. The driver will continue to support the old API as well by
checking the MULTI_CONSOLE_API compile-time flag.
Change-Id: I2ef8fb0d6ab72696997db1e0243a533499569d6b
Signed-off-by: Julius Werner <jwerner@chromium.org>
Julius Werner
committed
on 19 Jan 2018
|
drivers: arm: pl011: Update PL011 driver to support MULTI_CONSOLE_API
...
This patch updates the ARM PL011 console driver to support the new
console API. The driver will continue to support the old API as well by
checking the MULTI_CONSOLE_API compile-time flag.
Change-Id: Ic34e4158addbb0c5fae500c9cff899c05a4f4206
Signed-off-by: Julius Werner <jwerner@chromium.org>
Julius Werner
committed
on 19 Jan 2018
|