| 2018-08-30 |
Fix MISRA defects in BL31 common code
...
Change-Id: I5993b425445ee794e6d2a792c244c0af53640655
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 30 Aug 2018
|
| 2018-08-22 |
libc: Fix all includes in codebase
...
The codebase was using non-standard headers. It is needed to replace
them by the correct ones so that we can use the new libc headers.
Change-Id: I530f71d9510cb036e69fe79823c8230afe890b9d
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 22 Aug 2018
|
| 2018-07-25 |
Merge pull request #1486 from antonio-nino-diaz-arm/an/psci-misra
...
Fix several MISRA defects in PSCI library
danh-arm
authored
on 25 Jul 2018
GitHub
committed
on 25 Jul 2018
|
| 2018-07-24 |
synquacer: Enable optional OP-TEE support
...
OP-TEE loading is optional on Developerbox controlled via SCP
firmware. To check if OP-TEE is loaded or not, we use DRAM1 region
info passed by SCP firmware.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Sumit Garg
committed
on 24 Jul 2018
|
| 2018-07-20 |
PSCI: Fix types of definitions
...
Also change header guards to fix defects of MISRA C-2012 Rule 21.1.
Change-Id: Ied0d4b0e557ef6119ab669d106d2ac5d99620c57
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Acked-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 20 Jul 2018
|
| 2018-06-21 |
synquacer: Add platform makefile and documentation
...
Add Makefile and plaform definations file.
My thanks to Daniel Thompson and Ard Biesheuvel for the bits and pieces
I've taken from their earlier work regarding build and deploy steps for
Developerbox based on Synquacer SoCs. They deserve much of the credit
for this work although, since I assembled and tested things, any blame
is probably mine.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Sumit Garg
committed
on 21 Jun 2018
|
synquacer: Enable PSCI framework
...
PSCI framework uses SCPI driver to communicate to SCP firmware for
various power management operations. Following PSCI operations are
supported:
- CPU ON
- CPU OFF
- CPU STANDBY
- SYSTEM RESET
- SYSTEM OFF
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Sumit Garg
committed
on 21 Jun 2018
|
synquacer: Retrieve DRAM info from SCP firmware
...
Retrieve DRAM info from SCP firmware using SCPI driver. Board supports
multiple DRAM slots so its required to fetch DRAM info from SCP firmware
and pass this info to UEFI via non-secure SRAM.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Ard Biesheuvel
authored
on 15 Jun 2018
Sumit Garg
committed
on 21 Jun 2018
|
synquacer: Add SCPI driver
...
Add System Control and Power Interface (SCPI) driver which provides APIs
for PSCI framework to work. SCPI driver uses MHU driver APIs to communicate
with SCP firmware for various system control and power operations.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Sumit Garg
committed
on 21 Jun 2018
|
synquacer: Add MHU driver
...
Add Message Handling Unit (MHU) driver used to communicate among
Application Processors (AP) and System Control Processor (SCP).
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Sumit Garg
committed
on 21 Jun 2018
|
synquacer: Enable MMU using xlat_tables_v2 library
...
BL31 runs from SRAM which is a non-coherent memory on synquacer. So
enable MMU with SRAM memory marked as Non-Cacheable and mark page tables
kept on SRAM as Non-Cacheable via XLAT_TABLE_NC flag. Also add page tables
for Device address space.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Sumit Garg
committed
on 21 Jun 2018
|
synquacer: Enable System level Generic timer
...
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Sumit Garg
committed
on 21 Jun 2018
|
synquacer: Enable GICv3 support
...
synquacer uses GICv3 compliant GIC500. So enable proper GICv3 driver
initialization.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Sumit Garg
committed
on 21 Jun 2018
|
synquacer: Enable CCN driver support
...
synquacer has CCN-512 interconnect. So enable proper CCN driver
initialization.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Sumit Garg
committed
on 21 Jun 2018
|
synquacer: Implement topology functions
...
These functions describe the layout of the cores and clusters in order
to support the PSCI framework.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Sumit Garg
committed
on 21 Jun 2018
|
synquacer: Populate BL32 and BL33 entrypoints
...
As this platform supports direct entry to BL31 and no BL2, so
populate BL32 and BL33 entrypoints with static memory load info.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Sumit Garg
committed
on 21 Jun 2018
|
synquacer: Enable PL011 UART Console
...
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Sumit Garg
committed
on 21 Jun 2018
|
synquacer: Add platform core management helpers
...
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Sumit Garg
committed
on 21 Jun 2018
|
synquacer: Introduce basic platform support
...
synquacer supports direct entry to BL31 without BL1 and BL2 as
SCP firmware does similar work. So this patch adds BL31 stub APIs.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Sumit Garg
committed
on 21 Jun 2018
|
| 2018-06-11 |
uniphier: fix CCI-500 connection for LD20
...
The slave ports of LD20 CCI-500 are connected as follows:
S0: CA53
S1: CA72
Be careful because the slave interface is not arranged in the
cluster number order (CA72: cluster 0, CA53: cluster 1).
Root-caused-by: Tetsuya Yoshizaki <yoshizaki.tetsuya@socionext.com>
Signed-off-by: Satoshi Ikawa <ikawa.satoshi@socionext.com>
Satoshi Ikawa
authored
on 11 Jun 2018
Masahiro Yamada
committed
on 11 Jun 2018
|
| 2018-03-26 |
plat: fix switch statements to comply with MISRA rules
...
Ensure (where possible) that switch statements in plat comply with MISRA
rules 16.1 - 16.7.
Change-Id: Ie4a7d2fd10f6141c0cfb89317ea28a755391622f
Signed-off-by: Jonathan Wright <jonathan.wright@arm.com>
Jonathan Wright
committed
on 26 Mar 2018
|
| 2018-02-06 |
Merge pull request #1224 from masahir0y/gzip
...
Support GZIP-compressed images for faster loading and verification
davidcunado-arm
authored
on 6 Feb 2018
GitHub
committed
on 6 Feb 2018
|
| 2018-02-02 |
uniphier: add ULL to physical address literals
...
Looks like this is requirement in the pre-merge static analysis.
misra_violation: [Required] MISRA C-2012 Rule 7.2 violation:
Unsigned constants must be declared with U or u suffix.
Adding ULL as requested. I used ULL() macros for BL*_{BASE,LIMIT}
because they are referenced from linker scripts.
Requested-by: David Cunado <david.cunado@arm.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada
committed
on 2 Feb 2018
|
uniphier: allocate xlat region of on-chip SRAM only when needed
...
Currently, the xlat region of the on-chip SRAM is always allocated
for all BL images.
The access to the on-chip SRAM is necessary for loading images from
a USB memory device (i.e. when updating firmware), so unneeded for
the usual boot procedure.
To avoid this waste, allocate the xlat region dynamically only for
BL2, and only when it is necessary.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada
committed
on 2 Feb 2018
|
uniphier: get back original BL31/32 location used before BL2-AT-EL3
...
Commit 247fc0435191 ("uniphier: switch to BL2-AT-EL3 and remove BL1
support") accidentally changed the location of BL31 and BL32. The
new memory map overlaps with the audio DSP images, also gives impact
to OP-TEE. They are both out of control of ARM Trusted Firmware, so
not easy to change. This commit restores the image layout that was
originally used prior to the BL2-AT-EL3 migration.
Reported-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada
committed
on 2 Feb 2018
|
| 2018-02-01 |
uniphier: support GZIP-compressed images
...
Allow to handle GZIP-compressed images by giving FIP_GZIP=1 from the
command line.
- Images are GZIP-compressed, then packed into FIP. If Trusted Board
Boot is enabled, certificates are generated based on the compressed
images.
- GZIP decompressor is linked into BL2 to decompress images at
run-time.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada
committed
on 1 Feb 2018
|
uniphier: add a helper to get image_info
...
In the next commit, I will have more usecases to get struct image_info
from image ID. It is better to make a helper function at a different
layer. I do not need the current uniphier_image_descs_fixup() since
the code is small enough to be squashed into the caller side.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada
committed
on 1 Feb 2018
|
| 2018-01-24 |
uniphier: switch to BL2-AT-EL3 and remove BL1 support
...
UniPhier platform implements non-TF boot ROM. Prior to the BL2-AT-EL3
support, BL1 (worked as a pseudo ROM) was needed just for ensuring BL2
is entered at EL1-S. Now, this platform is able to avoid this waste.
Enable the BL2_AT_EL3 option, and remove BL1.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada
committed
on 24 Jan 2018
|
uniphier: set PROGRAMMABLE_RESET_ADDRESS to disable warm boot mailbox
...
The warm boot mailbox code is compiled if PROGRAMMABLE_RESET_ADDRESS
is disabled.
The warm boot mailbox is useless for UniPhier SoC family because BL1
is not the first image. The UniPhier platform implements non-TF ROM,
then BL1 works as a pseudo ROM, so it is never executed in the warm
boot.
The reset vector address is not actually programmable for UniPhier
platform, but it should not hurt to enable PROGRAMMABLE_RESET_ADDRESS
to disable the mailbox and remove pointless plat_get_my_entrypoint.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada
committed
on 24 Jan 2018
|
| 2018-01-22 |
Allow API deprecation for uniphier platform
...
The `override ERROR_DEPRECATION = 1` setting in uniphier platform
makes deprecation of API difficult. Hence removing the same. This
flag should be specified on the command line if needed.
Change-Id: I8c82d8d13944e450a8cd636de3326137c04d7560
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
Soby Mathew
committed
on 22 Jan 2018
|
