gic: Remove deprecated driver and interfaces ...

Change-Id: I567a406edb090ae9d109382f6874846a79dd7473
Co-authored-by: Roberto Vargas <roberto.vargas@arm.com>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

tbbr: Use USE_TBBR_DEFS=1 by default ...

Change-Id: I2885b0d8cb9bb16da1fa96a30e46cccde434dc42
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Remove build option LOAD_IMAGE_V2 ...

The code of LOAD_IMAGE_V2=0 has been removed.

Change-Id: Iea03e5bebb90c66889bdb23f85c07d0c9717fffe
Co-authored-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Allow manually setting the AArch32 instruction set ...

At the moment the AArch32 instruction set isn't specified in the command
line, which means that the compiler is free to choose the one it sees
fit. This decision may change between compiler versions, so it is better
to specify it manually.

The build option AARCH32_INSTRUCTION_SET has been introduced for this
reason. This option can be set to T32 or A32 to pass the correct flags
to the compiler.

The current behaviour is to default to T32 due to it's smaller size.

Change-Id: I02297eb1d9404b5868ff7c054fbff9b3cda7fdb6
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

AArch64: Enable MPAM for lower ELs ...

Memory Partitioning And Monitoring is an Armv8.4 feature that enables
various memory system components and resources to define partitions.
Software running at various ELs can then assign themselves to the
desired partition to control their performance aspects.

With this patch, when ENABLE_MPAM_FOR_LOWER_ELS is set to 1, EL3 allows
lower ELs to access their own MPAM registers without trapping to EL3.
This patch however doesn't make use of partitioning in EL3; platform
initialisation code should configure and use partitions in EL3 if
required.

Change-Id: I5a55b6771ccaa0c1cffc05543d2116b60cbbcdcd
Co-authored-by: James Morse <james.morse@arm.com>
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

Add support for romlib in the build system ...

Romlib is a new image that is stored in ROM and contains the code of
several libraries that can be shared between different images. All
the functions within in the library are accessed using a jump table
which allows to update the romlib image whithout changing the binary
compatibility. This jump table can be also stored in RAM and it can
allow to patch a romlib with potential bugs fixes..

Change-Id: If980ccdaca24b7aaca900e32acc68baf6f94ab35
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>

Add make macros to build library archives ...

This patch adds all the make macros needed to create a library archive
and to use it in the link stage.

Change-Id: I26597bfd6543649d0b68a9b1e06aec1ba353e6de
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>

make: support libraries in MAKE_BL macro ...

Add support for BLx stages to use libraries in MAKE_BL macro.
This change does not affect BL stages that do not have
BL_LIBS variable defined in their makefiles.
However in case that BL wants to use external library
(for instance vendor-specific DDR initialization code supplied
as a library), this patch will allow to build BL image linked
with such library.

Change-Id: Ife29069a72dc4aff833db6ef8b828736d6689b78
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

Build: add cpp build processing for dtb ...

This is an add-on feature that allows processing
device tree with external includes.

"-Iinclude" is also added to INCLUDES.
It allows inclusion of dt-bindings files either in dts files or drivers,
as those files will be in include/dt-bindings/.

"-i fdts" is added to the DTC command line.
As the pre-processed files are in build directory, the DT source directory
has to be explicitely included, to manages /include/ directives.

fixes arm-software/tf-issues#595

Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>

Allow disabling authentication dynamically ...

This patch allows platforms to dynamically disable authentication of
images during cold boot. This capability is controlled via the
DYN_DISABLE_AUTH build flag and is only meant for development
purposes.

Change-Id: Ia3df8f898824319bb76d5cc855b5ad6c3d227260
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

RAS: Add fault injection support ...

The ARMv8.4 RAS extensions introduce architectural support for software
to inject faults into the system in order to test fault-handling
software. This patch introduces the build option FAULT_HANDLING_SUPPORT
to allow for lower ELs to use registers in the Standard Error Record to
inject fault. The build option RAS_EXTENSIONS must also be enabled along
with fault injection.

This feature is intended for testing purposes only, and is advisable to
keep disabled for production images.

Change-Id: I6f7a4454b15aec098f9505a10eb188c2f928f7ea
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

AArch64: Introduce RAS handling ...

RAS extensions are mandatory for ARMv8.2 CPUs, but are also optional
extensions to base ARMv8.0 architecture.

This patch adds build system support to enable RAS features in ARM
Trusted Firmware. A boolean build option RAS_EXTENSION is introduced for
this.

With RAS_EXTENSION, an Exception Synchronization Barrier (ESB) is
inserted at all EL3 vector entry and exit. ESBs will synchronize pending
external aborts before entering EL3, and therefore will contain and
attribute errors to lower EL execution. Any errors thus synchronized are
detected via. DISR_EL1 register.

When RAS_EXTENSION is set to 1, HANDLE_EL3_EA_FIRST must also be set to 1.

Change-Id: I38a19d84014d4d8af688bd81d61ba582c039383a
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

AArch64: Introduce External Abort handling ...

At present, any External Abort routed to EL3 is reported as an unhandled
exception and cause a panic. This patch enables ARM Trusted Firmware to
handle External Aborts routed to EL3.

With this patch, when an External Abort is received at EL3, its handling
is delegated to plat_ea_handler() function. Platforms can provide their
own implementation of this function. This patch adds a weak definition
of the said function that prints out a message and just panics.

In order to support handling External Aborts at EL3, the build option
HANDLE_EA_EL3_FIRST must be set to 1.

Before this patch, HANDLE_EA_EL3_FIRST wasn't passed down to
compilation; this patch fixes that too.

Change-Id: I4d07b7e65eb191ff72d63b909ae9512478cd01a1
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

Add support for the SMC Calling Convention 2.0 ...

Due to differences in the bitfields of the SMC IDs, it is not possible
to support SMCCC 1.X and 2.0 at the same time.

The behaviour of `SMCCC_MAJOR_VERSION` has changed. Now, it is a build
option that specifies the major version of the SMCCC that the Trusted
Firmware supports. The only two allowed values are 1 and 2, and it
defaults to 1. The value of `SMCCC_MINOR_VERSION` is derived from it.

Note: Support for SMCCC v2.0 is an experimental feature to enable
prototyping of secure partition specifications. Support for this
convention is disabled by default and could be removed without notice.

Change-Id: I88abf9ccf08e9c66a13ce55c890edea54d9f16a7
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Add support for BL2 in XIP memory ...

In some use-cases BL2 will be stored in eXecute In Place (XIP) memory,
like BL1. In these use-cases, it is necessary to initialize the RW sections
in RAM, while leaving the RO sections in place. This patch enable this
use-case with a new build option, BL2_IN_XIP_MEM. For now, this option
is only supported when BL2_AT_EL3 is 1.

Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>

Merge pull request #1293 from swarren/issue-551-followup ...

Don't make build results depend on dependency files

Change PLATFORM_ROOT to TF_PLATFORM_ROOT ...

Since we use "?=" to set PLATFORM_ROOT, it is better to change the
name to be more special, or else it may be overridden by some
environment variables, such as in some CI build environments.

Signed-off-by: Heyi Guo <heyi.guo@linaro.org>

Make all build results depend on all makefiles ...

This makes incremental builds work when the only change is to a definition
in a makefile. This version of the patch has been fixed to avoid depending
on the dependency makefiles that are generated at build time.

Fixes arm-software/tf-issues#551

Signed-off-by: Stephen Warren <swarren@nvidia.com>

Improve MULTI_CONSOLE_API deprecation warnings ...

For platforms that have not migrated to MULTI_CONSOLE_API == 1, there
are a lot of confusing deprecated declaration warnings relating to
use of console_init() and console_uninit(). Some of these relate to use
by the generic code, not the platform code. These functions are not really
deprecated but *removed* when MULTI_CONSOLE_API == 1.

This patch consolidates these warnings into a single preprocessor warning.
The __deprecated attribute is removed from the console_init() and
console_uninit() declarations.

For preprocessor warnings like this to not cause fatal build errors,
this patch adds -Wno-error=cpp to the build flags when
ERROR_DEPRECATED == 0.
This option (and -Wno-error=deprecated-declarations) is now added to
CPPFLAGS instead of TF_CFLAGS to ensure the build flags are used in the
assembler as well as the compiler.

This patch also disentangles the MULTI_CONSOLE_API and ERROR_DEPRECATED
build flags by defaulting MULTI_CONSOLE_API to 0 instead of
ERROR_DEPRECATED. This allows platforms that have not migrated to
MULTI_CONSOLE_API to use ERROR_DEPRECATED == 1 to emit a more meaningful
build error.

Finally, this patch bans use of MULTI_CONSOLE_API == 1 and AARCH32, since
the AArch32 console implementation does not support
MULTI_CONSOLE_API == 1.

Change-Id: If762165ddcb90c28aa7a4951aba70cb15c2b709c
Signed-off-by: Dan Handley <dan.handley@arm.com>

Revert "Make all build results depend on all makefiles" ...

Seems to have unintended side-effects on the build system such as
rebuilding certain parts of TF even though nothing has changed.

This reverts commit c6f651f.

Change-Id: I1472e6c630cb6371ec629b7d97a5748d9a6fd096
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

Makefile: Add `all` target to MAKE_DTBS ...

This patch makes some minor changes to `MAKE_DTBS` make macro
and adds `dtbs` target to the `all` make target.

Change-Id: I1c5b4a603ada31d2dac2ed73da9ff707b410dd11
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

Make all build results depend on all makefiles ...

This makes incremental builds work when the only change is to a
definition in a makefile.

Fixes arm-software/tf-issues#551

Signed-off-by: Stephen Warren <swarren@nvidia.com>

Build: add GZIP compression filter ...

One typical usage of the pre-tool image filter is data compression,
and GZIP is one of the most commonly used compression methods.
I guess this is generic enough to be put in the common script instead
of platform.mk.

If you want to use this, you can add something like follows to your
platform.mk:

    BL32_PRE_TOOL_FILTER := GZIP
    BL33_PRE_TOOL_FILTER := GZIP

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Build: support pre-tool image processing ...

There are cases where we want to process images before they are
passed to cert_create / fiptool.

My main motivation is data compression.  By compressing images, we can
save data storage, and possibly speed up loading images.  The image
verification will also get faster because certificates are generated
based on compressed images.

Other image transformation filters (for ex. encryption), and their
combinations would be possible.  So, our build system should support
transformation filters in a generic manner.

The choice of applied filters is up to platforms (so specified in
platform.mk)

To define a new filter, <FILTER_NAME>_RULE and <FILTER_NAME>_SUFFIX
are needed.

For example, the GZIP compression filter can be implemented as follows:

------------------------>8------------------------
define GZIP_RULE
$(1): $(2)
        @echo "  GZIP    $$@"
        $(Q)gzip -n -f -9 $$< --stdout > $$@
endef

GZIP_SUFFIX := .gz
------------------------>8------------------------

The _RULE defines how to create the target $(1) from the source $(2).
The _SUFFIX defines the extension appended to the processed image path.
The suffix is not so important because the file name information is not
propagated to FIP, but adding a sensible suffix will be good to classify
the data file.

Platforms can specify which filter is applied to which BL image, like
this:

------------------------>8------------------------
BL32_PRE_TOOL_FILTER := GZIP
BL33_PRE_TOOL_FILTER := GZIP
------------------------>8------------------------

<IMAGE_NAME>_PRE_TOOL_FILTER specifies per-image filter.  With this,
different images can be transformed differently.  For the case above,
only BL32 and BL33 are GZIP-compressed.  Nothing is done for other
images.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Build: change the first parameter of TOOL_ADD_IMG to lowercase ...

In the next commit, I need the image name in lowercase because
output files are generally named in lowercase.

Unfortunately, TOOL_ADD_IMG takes the first argument in uppercase
since we generally use uppercase Make variables.

make_helpers/build_macros.mk provides 'uppercase' macro to convert
a string into uppercase, but 'lowercase' does not exist.  We can
implement it if we like, but it would be more straightforward to
change the argument of TOOL_ADD_IMG.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Build: make tools depend on $(BIN) instead of PHONY target ...

The PHONY target "bl*" generate $(BIN) and $(DUMP), but host tools
(fiptool, cert_create) only need $(BIN).

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Build: remove third argument of CERT_ADD_CMD_OPT ...

The third argument was given "true" by images, but it was moved
to TOOL_ADD_PAYLOAD.  No more caller of CERT_ADD_CMD_OPT uses this.
So, the third argument is always empty.  Remove it.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Build: rename FIP_ADD_IMG to TOOL_ADD_IMG ...

Now FIP_ADD_IMG takes care of both fiptool and cert_create
symmetrically.  Rename it so that it matches the behavior.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Build: rename FIP_ADD_PAYLOAD to TOOL_ADD_PAYLOAD ...

Now FIP_ADD_PAYLOAD takes care of both fiptool and cert_create
symmetrically.  Rename it so that it matches the behavior.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Build: move cert_create arguments and dependency to FIP_ADD_PAYLOAD ...

The fiptool and cert_create use the same command options for images.
It is pretty easy to handle both in the same, symmetrical way.

Move CRT_ARGS and CRT_DEPS to FIP_ADD_PAYLOAD.  This refactoring makes
sense because FIP_ADD_PAYLOAD is called from MAKE_BL (when building
images from source), and from FIP_ADD_IMG (when including external
images).  (FIP_ADD_PAYLOAD will be renamed later on since it now
caters to both fiptool and cert_create).

We can delete CERT_ADD_CMD_OPT for images in tbbr.mk.  It still
needs to call CERT_ADD_CMD_OPT directly for certificates.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>