2019-02-11 |
hikey960: enable IOMCU DMAC
...
There exists a third DMA controller on the hi3660
SoC called the IOMCU DMAC. This controller is used by
peripherals like SPI2 and UART3. Initialize channels 4-7
as non-secure, while 0-3 remain reserved and secure.
Signed-off-by: Ryan Grachek <ryan@edited.us>
Ryan Grachek
committed
on 11 Feb 2019
|
2019-01-10 |
hikey960: Increase max xlat tables
...
It is cleaner to use the same number of tables regardless of whether
OP-TEE is used or not. This doesn't result in a significant memory
usage increase.
Change-Id: I38bcaa3f2f197c0a352153117592749f189a265c
Signed-off-by: Joel Hutton <Joel.Hutton@Arm.com>
Joel Hutton
committed
on 10 Jan 2019
|
2019-01-04 |
Sanitise includes across codebase
...
Enforce full include path for includes. Deprecate old paths.
The following folders inside include/lib have been left unchanged:
- include/lib/cpus/${ARCH}
- include/lib/el3_runtime/${ARCH}
The reason for this change is that having a global namespace for
includes isn't a good idea. It defeats one of the advantages of having
folders and it introduces problems that are sometimes subtle (because
you may not know the header you are actually including if there are two
of them).
For example, this patch had to be created because two headers were
called the same way: e0ea0928d5b7 ("Fix gpio includes of mt8173 platform
to avoid collision."). More recently, this patch has had similar
problems: 46f9b2c3a282 ("drivers: add tzc380 support").
This problem was introduced in commit 4ecca33988b9 ("Move include and
source files to logical locations"). At that time, there weren't too
many headers so it wasn't a real issue. However, time has shown that
this creates problems.
Platforms that want to preserve the way they include headers may add the
removed paths to PLAT_INCLUDES, but this is discouraged.
Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 4 Jan 2019
|
2018-12-10 |
io_block: define MAX_IO_BLOCK_DEVICES as unsigned
...
This is used as a table index, and already compared with an unsigned int:
block_dev_count.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Yann Gautier
committed
on 10 Dec 2018
|
2018-11-29 |
hikey960: initialize EDMAC and channels
...
This is needed to utilize the DMA controller on the hikey960
Signed-off-by: Ryan Grachek <ryan@edited.us>
Ryan Grachek
committed
on 29 Nov 2018
|
2018-11-08 |
Standardise header guards across codebase
...
All identifiers, regardless of use, that start with two underscores are
reserved. This means they can't be used in header guards.
The style that this project is now to use the full name of the file in
capital letters followed by 'H'. For example, for a file called
"uart_example.h", the header guard is UART_EXAMPLE_H.
The exceptions are files that are imported from other projects:
- CryptoCell driver
- dt-bindings folders
- zlib headers
Change-Id: I50561bf6c88b491ec440d0c8385c74650f3c106e
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 8 Nov 2018
|
2018-10-02 |
Merge pull request #1587 from antonio-nino-diaz-arm/an/deprecated
...
Remove deprecated interfaces for all platforms
Soby Mathew
authored
on 2 Oct 2018
GitHub
committed
on 2 Oct 2018
|
2018-09-28 |
hikey960: Migrate to new interfaces
...
- Migrate to new GIC interfaces.
- Remove unused bl1_init_bl2_mem_layout().
- Migrate to bl31_early_platform_setup2().
- Use PLAT_VIRT_ADDR_SPACE_SIZE and PLAT_PHY_ADDR_SPACE_SIZE.
- Remove references to removed build options.
- Update Makefile paths.
Change-Id: I583fd893555e6535f32d87ed67bbae430b8e6afe
Tested-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 28 Sep 2018
|
2018-09-26 |
hikey960: fix build issue for clang
...
plat/hisilicon/hikey960/include/plat_macros.S:19:55: error: unexpected token in
'.asciz' directive
.asciz "gicd_ispendr regs (Offsets 0x200 - 0x278)\n" " Offset:\t\t\tvalue\n"
^
Makefile:720: recipe for target 'build/hikey960/debug/bl1/cortex_a53.o' failed
make: *** [build/hikey960/debug/bl1/cortex_a53.o] Error 1
Merge the two lines into one.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Haojian Zhuang
committed
on 26 Sep 2018
|
2018-09-09 |
hikey960: Add development TBB support
...
This patch adds experimental support for TBB to the HiKey960 board. To
build and test with TBB modify the uefi-tools project platforms.config
+ATF_BUILDFLAGS=TRUSTED_BOARD_BOOT=1 GENERATE_COT=1 SAVE_KEYS=1 \
MBEDTLS_DIR=./mbedtls
Signed-off-by: Teddy Reed <teddy@casualhacking.io>
Teddy Reed
committed
on 9 Sep 2018
|
2018-07-27 |
Merge pull request #1494 from hzhuang1/pcie_pin
...
Hikey960: configure pins for PCIe controller
Soby Mathew
authored
on 27 Jul 2018
GitHub
committed
on 27 Jul 2018
|
Hikey960: configure pins for PCIe controller
...
GPIO_089 connects to PCIE_PERST_N. It needs to be configured as
output low.
Signed-off-by: Kaihua Zhong <zhongkaihua@huawei.com>
Signed-off-by: Xiaowei Song <songxiaowei@hisilicon.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Kaihua Zhong
authored
on 16 Jul 2018
Haojian Zhuang
committed
on 27 Jul 2018
|
2018-07-20 |
PSCI: Fix types of definitions
...
Also change header guards to fix defects of MISRA C-2012 Rule 21.1.
Change-Id: Ied0d4b0e557ef6119ab669d106d2ac5d99620c57
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Acked-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 20 Jul 2018
|
2018-03-08 |
Merge pull request #1277 from hzhuang1/testing/bl2_el3_v0.6
...
hikey: migrate to BL2_EL3
davidcunado-arm
authored
on 8 Mar 2018
GitHub
committed
on 8 Mar 2018
|
2018-03-05 |
hikey960: migrate to bl2_el3
...
Since non-TF ROM is used in HiKey960 platform (Hisilicon Hi3660 SoC),
replace BL1 by BL2_EL3 in normal boot mode.
When flush images in recovery mode, keep to use BL1.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Haojian Zhuang
committed
on 5 Mar 2018
|
hikey960: drop LOAD_IMAGE v1
...
Since LOAD_IMAGE_V2 is always enabled in HiKey960 platform. Drop
LOAD_IMAGE v1 to simplify code.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Haojian Zhuang
committed
on 5 Mar 2018
|
2018-02-27 |
Update ULL() macro and instances of ull to comply with MISRA
...
MISRA C-2012 Rule 7.3 violation: lowercase l shall not be used as literal suffixes.
This patch resolves this for the ULL() macro by using ULL suffix instead
of the ull suffix.
Change-Id: Ia8183c399e74677e676956e8653e82375d0e0a01
Signed-off-by: David Cunado <david.cunado@arm.com>
David Cunado
committed
on 27 Feb 2018
|
2018-01-17 |
Merge pull request #1211 from Leo-Yan/remove_ca73_cpu_nap_state
...
Hikey960: Remove ca73 cpu nap state
davidcunado-arm
authored
on 17 Jan 2018
GitHub
committed
on 17 Jan 2018
|
2018-01-16 |
Revert "Hikey960: Change to use recommended power state id format"
...
This reverts commit fdae60b .
The commit fdae60b changed the
parameter encoding for the hikey960. However that implies a DT change
in the kernel side. After submitting the DT change for upstreaming,
the backward compatibility issue and the interface change raise some
concerns from the Linux community about the issues related to kernel <->
ATF alignment. There is no way to detect a mis-alignment of those
without a deep knowledge of the ATF and the kernel. Furthermore, the
failing calls to PSCI in the idle path (because of bad parameters), will
lead to busy looping, implying: thermal issues and extra energy
consumption.
In regard of the Linux community concerns, the potential issues when the
ATF and the kernel are not aligned, it is preferable to revert the
commit.
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Haojian Zhuang <haojian.zhuang@linaro.org>
Cc: Kevin Wang <jean.wangtao@linaro.org>
Co-authored-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Leo Yan
committed
on 16 Jan 2018
|
2018-01-09 |
Hikey960: Fix hikey960 pcie mount fail
...
Set IOC_AO_IOMG_033 function from GPIO213 to PCIE_CLKREQ_N
bit[0-2]: 000: GPIO_213;
001: PCIE_CLKREQ_N;
010: GPIO_018_SH;
100: GPIO_014_SE;
110: FAC_TEST24;
111: FAC_TEST24;
bit[3-31]: reserved
Signed-off-by: Guangtao Zhang <zhangguangtao@hisilicon.com>
Tested-by: Yao Chen <chenyao11@huawei.com>
Acked-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Kaihua Zhong
authored
on 9 Jan 2018
Haojian Zhuang
committed
on 9 Jan 2018
|
2017-12-05 |
Hikey960: Change to use recommended power state id format
...
ARM Power State Coordination Interface (ARM DEN 0022D) chapter
6.5 "Recommended StateID Encoding" defines the state ID which can be
used by platforms. The recommended power states can be presented by
below values; and it divides into three fields, every field has 4 bits
to present power states corresponding to core level, cluster level and
system level.
0: Run
1: Standby
2: Retention
3: Powerdown
This commit changes to use upper recommended power states definition on
Hikey960; and changes the power state validate function to check the
power state passed from kernel side.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Leo Yan
committed
on 5 Dec 2017
|
2017-11-01 |
Fix usage of IMAGE_BLx macros
...
These macros are only defined for corresponding image,
and they are undefined for other images. It means that we have
to use ifdef or defined() instead of relying on being 0 by default.
Change-Id: Iad11efab9830ddf471599b46286e1c56581ef5a7
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
Roberto Vargas
committed
on 1 Nov 2017
|
2017-09-13 |
hikey*: Undef BL32_BASE when building without SPD
...
Otherwise, BL2 tries to load a BL32 image and triggers
assert(result == 0)
in
plat_get_image_source()
in hikey{960}_io_storage.c
in a debug build, or displays
ERROR: BL2: Failed to load image
in a release build.
Signed-off-by: Victor Chong <victor.chong@linaro.org>
Victor Chong
committed
on 13 Sep 2017
|
2017-09-01 |
hikey*: Support Trusted OS extra image (OP-TEE header) parsing
...
Signed-off-by: Victor Chong <victor.chong@linaro.org>
Victor Chong
committed
on 1 Sep 2017
|
hikey*: Add LOAD_IMAGE_V2 support
...
Signed-off-by: Victor Chong <victor.chong@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Victor Chong
committed
on 1 Sep 2017
|
2017-07-20 |
Merge pull request #1029 from islmit01/im/fix_includes
...
Fix order of includes
davidcunado-arm
authored
on 20 Jul 2017
GitHub
committed
on 20 Jul 2017
|
2017-07-14 |
Fix order of remaining platform #includes
...
This fix modifies the order of system includes to meet the ARM TF coding
standard. There are some exceptions to this change in order to retain
header groupings and where there are headers within #if statements.
Change-Id: Ib5b668c992d817cc860e97b29e16ef106d17e404
Signed-off-by: Isla Mitchell <isla.mitchell@arm.com>
Isla Mitchell
committed
on 14 Jul 2017
|
2017-07-12 |
hikey960: Add BL32 (OP-TEE) support
...
Signed-off-by: Victor Chong <victor.chong@linaro.org>
Acked-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Victor Chong
committed
on 12 Jul 2017
|
2017-06-07 |
hikey960: support BL31
...
Support BL31 on HiKey960 platform. Implement PSCI.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Haojian Zhuang
committed
on 7 Jun 2017
|
hikey960: support BL1 on hikey960 platform
...
Support BL1 on HiKey960 platform. When recovery mode is detected,
BL1 loads NS BL1U that flushs images into UFS. When normal boot
mode is detected, BL1 loads BL2.
Fix for https://github.com/ARM-software/tf-issues/issues/486
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Haojian Zhuang
committed
on 7 Jun 2017
|