2019-09-03 |
uniphier: set CONSOLE_FLAG_TRANSLATE_CRLF and clean up console driver
...
This console driver sends '\r' before 'n', not after.
It works, but the convention is "\r\n" (i.e. CRLF)
Instead of fixing it in the driver, set CONSOLE_FLAG_TRANSLATE_CRLF
to leave it to the framework.
Change-Id: I2154e29313739a40dff70cfb5c0f8989136d4ad2
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada
authored
on 22 Jul 2019
Paul Beesley
committed
on 3 Sep 2019
|
2019-07-31 |
uniphier: fix typo and coding style
...
Fix the typo "warn" -> "warm".
Also fix the following checkpatch.pl warnings:
CHECK: Prefer using the BIT macro
CHECK: No space is necessary after a cast
CHECK: Alignment should match open parenthesis
CHECK: Unnecessary parentheses around uniphier_io_policies[image_id].dev_handle
Change-Id: Ic11eea2668c4bf2d1e8f089e6338ba7b7156d80b
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada
committed
on 31 Jul 2019
|
uniphier: replace DIV_ROUND_UP() with div_round_up() from utils_def.h
...
Use the helper in utils_def.h instead of the own macro.
Change-Id: I527f9e75914d60f66354e365006b960ba5e8cbae
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada
committed
on 31 Jul 2019
|
2019-07-05 |
uniphier: support console based on multi-console
...
The legacy console is gone. Re-add the console support based on the
multi-console framework.
I am still keeping the putc, getc, and flush callbacks in
uniphier_console.S to use plat/common/aarch64/crash_console_helpers.S
The console registration code already relies on that C environment
has been set up. So, I just filled the struct console fields with the
callback pointers, then called console_register() directly. I also
re-implemented the init function in C to improve the readability.
Removing the custom crash console implementation has one disadvantage;
we cannot use the crash console on very early crashes because
crash_console_helpers.S works only after the console is registered.
I can live with this limitation.
Tested on my boards, and confirmed this worked like before.
Change-Id: Ieab9c849853ff6c525c15ea894a85944f257db59
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada
committed
on 5 Jul 2019
|
2019-04-12 |
Mbed TLS: Remove weak heap implementation
...
The implementation of the heap function plat_get_mbedtls_heap() becomes
mandatory for platforms supporting TRUSTED_BOARD_BOOT.
The shared Mbed TLS heap default weak function implementation is
converted to a helper function get_mbedtls_heap_helper() which can be
used by the platforms for their own function implementation.
Change-Id: Ic8f2994e25e3d9fcd371a21ac459fdcafe07433e
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
Ambroise Vincent
committed
on 12 Apr 2019
|
2019-02-01 |
Remove unneeded include paths in PLAT_INCLUDES
...
Also, update platform_def.h guidelines about includes in the porting
guide.
Change-Id: I1ae338c9dd3242b309f6d53687ba2cb755d488c3
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 1 Feb 2019
|
Remove duplicated definitions of linker symbols
...
Many parts of the code were duplicating symbols that are defined in
include/common/bl_common.h. It is better to only use the definitions in
this header.
As all the symbols refer to virtual addresses, they have to be
uintptr_t, not unsigned long. This has also been fixed in bl_common.h.
Change-Id: I204081af78326ced03fb05f69846f229d324c711
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 1 Feb 2019
|
2019-01-04 |
Sanitise includes across codebase
...
Enforce full include path for includes. Deprecate old paths.
The following folders inside include/lib have been left unchanged:
- include/lib/cpus/${ARCH}
- include/lib/el3_runtime/${ARCH}
The reason for this change is that having a global namespace for
includes isn't a good idea. It defeats one of the advantages of having
folders and it introduces problems that are sometimes subtle (because
you may not know the header you are actually including if there are two
of them).
For example, this patch had to be created because two headers were
called the same way: e0ea0928d5b7 ("Fix gpio includes of mt8173 platform
to avoid collision."). More recently, this patch has had similar
problems: 46f9b2c3a282 ("drivers: add tzc380 support").
This problem was introduced in commit 4ecca33988b9 ("Move include and
source files to logical locations"). At that time, there weren't too
many headers so it wasn't a real issue. However, time has shown that
this creates problems.
Platforms that want to preserve the way they include headers may add the
removed paths to PLAT_INCLUDES, but this is discouraged.
Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 4 Jan 2019
|
2018-12-10 |
io_block: define MAX_IO_BLOCK_DEVICES as unsigned
...
This is used as a table index, and already compared with an unsigned int:
block_dev_count.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Yann Gautier
committed
on 10 Dec 2018
|
2018-11-08 |
Standardise header guards across codebase
...
All identifiers, regardless of use, that start with two underscores are
reserved. This means they can't be used in header guards.
The style that this project is now to use the full name of the file in
capital letters followed by 'H'. For example, for a file called
"uart_example.h", the header guard is UART_EXAMPLE_H.
The exceptions are files that are imported from other projects:
- CryptoCell driver
- dt-bindings folders
- zlib headers
Change-Id: I50561bf6c88b491ec440d0c8385c74650f3c106e
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 8 Nov 2018
|
2018-10-30 |
uniphier: revise SCP protocol handshake
...
When the SoC issues a command IRQ to SCP, SCP sets STMTOBEIRQ as ACK.
The SoC must wait for it before issuing the next command.
This commit makes sure to meet the requirement.
Signed-off-by: Dai Okamura <okamura.dai@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Dai Okamura
authored
on 4 Oct 2018
Masahiro Yamada
committed
on 30 Oct 2018
|
uniphier: terminate boot if SCP_BL2 image is missing in SCP boot mode
...
Skipping SCP_BL2 image is just a temporary workaround. If on-chip SCP
needs to work, BL2 should load the SCP_BL2 image.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada
committed
on 30 Oct 2018
|
2018-09-28 |
uniphier: Migrate to new interfaces
...
- Remove references to removed build options.
- Migrate to bl31_early_platform_setup2().
Change-Id: I9242c4d02a36e385bf0bf8ee56287106030153d1
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 28 Sep 2018
|
2018-08-30 |
Fix MISRA defects in BL31 common code
...
Change-Id: I5993b425445ee794e6d2a792c244c0af53640655
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 30 Aug 2018
|
2018-08-22 |
libc: Fix all includes in codebase
...
The codebase was using non-standard headers. It is needed to replace
them by the correct ones so that we can use the new libc headers.
Change-Id: I530f71d9510cb036e69fe79823c8230afe890b9d
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 22 Aug 2018
|
2018-07-20 |
PSCI: Fix types of definitions
...
Also change header guards to fix defects of MISRA C-2012 Rule 21.1.
Change-Id: Ied0d4b0e557ef6119ab669d106d2ac5d99620c57
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Acked-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 20 Jul 2018
|
2018-06-11 |
uniphier: fix CCI-500 connection for LD20
...
The slave ports of LD20 CCI-500 are connected as follows:
S0: CA53
S1: CA72
Be careful because the slave interface is not arranged in the
cluster number order (CA72: cluster 0, CA53: cluster 1).
Root-caused-by: Tetsuya Yoshizaki <yoshizaki.tetsuya@socionext.com>
Signed-off-by: Satoshi Ikawa <ikawa.satoshi@socionext.com>
Satoshi Ikawa
authored
on 11 Jun 2018
Masahiro Yamada
committed
on 11 Jun 2018
|
2018-03-26 |
plat: fix switch statements to comply with MISRA rules
...
Ensure (where possible) that switch statements in plat comply with MISRA
rules 16.1 - 16.7.
Change-Id: Ie4a7d2fd10f6141c0cfb89317ea28a755391622f
Signed-off-by: Jonathan Wright <jonathan.wright@arm.com>
Jonathan Wright
committed
on 26 Mar 2018
|
2018-02-06 |
Merge pull request #1224 from masahir0y/gzip
...
Support GZIP-compressed images for faster loading and verification
davidcunado-arm
authored
on 6 Feb 2018
GitHub
committed
on 6 Feb 2018
|
2018-02-02 |
uniphier: add ULL to physical address literals
...
Looks like this is requirement in the pre-merge static analysis.
misra_violation: [Required] MISRA C-2012 Rule 7.2 violation:
Unsigned constants must be declared with U or u suffix.
Adding ULL as requested. I used ULL() macros for BL*_{BASE,LIMIT}
because they are referenced from linker scripts.
Requested-by: David Cunado <david.cunado@arm.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada
committed
on 2 Feb 2018
|
uniphier: allocate xlat region of on-chip SRAM only when needed
...
Currently, the xlat region of the on-chip SRAM is always allocated
for all BL images.
The access to the on-chip SRAM is necessary for loading images from
a USB memory device (i.e. when updating firmware), so unneeded for
the usual boot procedure.
To avoid this waste, allocate the xlat region dynamically only for
BL2, and only when it is necessary.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada
committed
on 2 Feb 2018
|
uniphier: get back original BL31/32 location used before BL2-AT-EL3
...
Commit 247fc0435191 ("uniphier: switch to BL2-AT-EL3 and remove BL1
support") accidentally changed the location of BL31 and BL32. The
new memory map overlaps with the audio DSP images, also gives impact
to OP-TEE. They are both out of control of ARM Trusted Firmware, so
not easy to change. This commit restores the image layout that was
originally used prior to the BL2-AT-EL3 migration.
Reported-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada
committed
on 2 Feb 2018
|
2018-02-01 |
uniphier: support GZIP-compressed images
...
Allow to handle GZIP-compressed images by giving FIP_GZIP=1 from the
command line.
- Images are GZIP-compressed, then packed into FIP. If Trusted Board
Boot is enabled, certificates are generated based on the compressed
images.
- GZIP decompressor is linked into BL2 to decompress images at
run-time.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada
committed
on 1 Feb 2018
|
uniphier: add a helper to get image_info
...
In the next commit, I will have more usecases to get struct image_info
from image ID. It is better to make a helper function at a different
layer. I do not need the current uniphier_image_descs_fixup() since
the code is small enough to be squashed into the caller side.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada
committed
on 1 Feb 2018
|
2018-01-24 |
uniphier: switch to BL2-AT-EL3 and remove BL1 support
...
UniPhier platform implements non-TF boot ROM. Prior to the BL2-AT-EL3
support, BL1 (worked as a pseudo ROM) was needed just for ensuring BL2
is entered at EL1-S. Now, this platform is able to avoid this waste.
Enable the BL2_AT_EL3 option, and remove BL1.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada
committed
on 24 Jan 2018
|
uniphier: set PROGRAMMABLE_RESET_ADDRESS to disable warm boot mailbox
...
The warm boot mailbox code is compiled if PROGRAMMABLE_RESET_ADDRESS
is disabled.
The warm boot mailbox is useless for UniPhier SoC family because BL1
is not the first image. The UniPhier platform implements non-TF ROM,
then BL1 works as a pseudo ROM, so it is never executed in the warm
boot.
The reset vector address is not actually programmable for UniPhier
platform, but it should not hurt to enable PROGRAMMABLE_RESET_ADDRESS
to disable the mailbox and remove pointless plat_get_my_entrypoint.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada
committed
on 24 Jan 2018
|
2018-01-22 |
Allow API deprecation for uniphier platform
...
The `override ERROR_DEPRECATION = 1` setting in uniphier platform
makes deprecation of API difficult. Hence removing the same. This
flag should be specified on the command line if needed.
Change-Id: I8c82d8d13944e450a8cd636de3326137c04d7560
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
Soby Mathew
committed
on 22 Jan 2018
|
2018-01-03 |
uniphier: simplify GZIP compress rule
...
It is not necessary to read data from stdin. The input file name
is ripped off by -n option, anyway. I still use the redirect for
the output to specify the output file name.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada
committed
on 3 Jan 2018
|
2017-12-19 |
uniphier: fix alignment of build log
...
The build log should be indented with two spaces for correct alignment.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada
committed
on 19 Dec 2017
|
uniphier: fix base address of IO block buffer
...
The current IO block buffer overlaps with BL2 image location.
So, BL2 may corrupt itself.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada
committed
on 19 Dec 2017
|