rpi3: Prepare for supporting a GIC (in RPi4) ...

As the PSCI "power" management functions for the Raspberry Pi 3 port
will be shared with the upcoming RPi4 support, we need to prepare them
for dealing with the GIC interrupt controller.
Splitting this code just for those simple calls to the generic GIC
routines does not seem worthwhile, so just use a #define the protect the
GIC code from being included by the existing RPi3 code.

Change-Id: Iaca6b0214563852b28ad4a088ec45348ae8be40d
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

qemu: Move and generalise FDT PSCI fixup ...

The QEMU platform port scans its device tree to advertise PSCI as the
CPU enable method. It does this by scanning *every* node in the DT and
check whether its compatible string starts with "arm,cortex-a". Then it
sets the enable-method to PSCI, if it doesn't already have one.

Other platforms might want to use this functionality as well, so let's
move it out of the QEMU platform directory and make it more robust by
fixing some shortcomings:
- A compatible string starting with a certain prefix is not a good way
to find the CPU nodes. For instance a "arm,cortex-a72-pmu" node will
match as well and is in turn favoured with an enable-method.
- If the DT already has an enable-method, we won't change this to PSCI.

Those two issues will for instance fail on the Raspberry Pi 4 DT.
To fix those problems, we adjust the scanning method:
The DT spec says that all CPU nodes are subnodes of the mandatory
/cpus node, which is a subnode of the root node. Also each CPU node has
to have a device_type = "cpu" property. So we find the /cpus node, then
scan for a subnode with the proper device_type, forcing the
enable-method to "psci".
We have to restart this search after a property has been patched, as the
node offsets might have changed meanwhile.

This allows this routine to be reused for the Raspberry Pi 4 later.

Change-Id: I00cae16cc923d9f8bb96a9b2a2933b9a79b06139
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

rpi3: Move VC mailbox driver into generic drivers directory ...

To allow sharing the driver between the RPi3 and RPi4, move the mailbox
driver into the generic driver directory.

Change-Id: I463e49acf82b02bf004f3d56482b7791f3020bc0
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

rpi3: Make SHARED_RAM optional ...

The existing Raspberry Pi 3 port sports a number of memory regions,
which are used for several purposes. The upcoming RPi4 port will not use
all of those, so make the SHARED_RAM region optional, by only mapping it
if it has actually been defined. This helps to get a cleaner RPi4 port.

Change-Id: Id69677b7fb6ed48d9f238854b610896785db8cab
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

rpi3: Move rpi3_hw.h header file to include/rpi_hw.h ...

With the advent of Raspberry Pi 4 support, we need to separate some
board specific headers between the RPi3 and RPi4.
Rename and move the "rpi3_hw.h" header, so that .c files just include
rpi_hw.h, and automatically get the correct version.

Change-Id: I03b39063028d2bee1429bffccde71dddfe2dcde8
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

rpi3: Rename RPI3_IO_BASE to RPI_IO_BASE ...

The location of the MMIO window is different between a Raspberry Pi 3
and 4: the former has it just below 1GB, the latter below 4GB.
The relative location of the peripherals is mostly compatible though.

To allow sharing code between the two models, let's rename the symbol
used for the MMIO base to the more generic RPI_IO_BASE name.

Change-Id: I3c2762fb30fd56cca743348e79d72ef8c60ddb03
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

rpi3: Move shared rpi3 files into common directory ...

To be able to share code more easily between the existing Raspberry Pi 3
and the upcoming Raspberry Pi 4 platform, move some code which is not
board specific into a "common" directory.

Change-Id: I9211ab2d754b040128fac13c2f0a30a5cc8c7f2c
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

Merge "Refactor ARMv8.3 Pointer Authentication support code" into integration

Merge "Modify FVP makefile for cores that support both AArch64/32" into integration

Merge "amlogic: console: Move console driver to common directory" into integration

Refactor ARMv8.3 Pointer Authentication support code ...

This patch provides the following features and makes modifications
listed below:
- Individual APIAKey key generation for each CPU.
- New key generation on every BL31 warm boot and TSP CPU On event.
- Per-CPU storage of APIAKey added in percpu_data[]
  of cpu_data structure.
- `plat_init_apiakey()` function replaced with `plat_init_apkey()`
  which returns 128-bit value and uses Generic timer physical counter
  value to increase the randomness of the generated key.
  The new function can be used for generation of all ARMv8.3-PAuth keys
- ARMv8.3-PAuth specific code placed in `lib\extensions\pauth`.
- New `pauth_init_enable_el1()` and `pauth_init_enable_el3()` functions
  generate, program and enable APIAKey_EL1 for EL1 and EL3 respectively;
  pauth_disable_el1()` and `pauth_disable_el3()` functions disable
  PAuth for EL1 and EL3 respectively;
  `pauth_load_bl31_apiakey()` loads saved per-CPU APIAKey_EL1 from
  cpu-data structure.
- Combined `save_gp_pauth_registers()` function replaces calls to
  `save_gp_registers()` and `pauth_context_save()`;
  `restore_gp_pauth_registers()` replaces `pauth_context_restore()`
  and `restore_gp_registers()` calls.
- `restore_gp_registers_eret()` function removed with corresponding
  code placed in `el3_exit()`.
- Fixed the issue when `pauth_t pauth_ctx` structure allocated space
  for 12 uint64_t PAuth registers instead of 10 by removal of macro
  CTX_PACGAKEY_END from `include/lib/el3_runtime/aarch64/context.h`
  and assigning its value to CTX_PAUTH_REGS_END.
- Use of MODE_SP_ELX and MODE_SP_EL0 macro definitions
  in `msr	spsel`  instruction instead of hard-coded values.
- Changes in documentation related to ARMv8.3-PAuth and ARMv8.5-BTI.

Change-Id: Id18b81cc46f52a783a7e6a09b9f149b6ce803211
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

Merge "stm32mp1: manage CONSOLE_FLAG_TRANSLATE_CRLF and cleanup driver" into integration

Merge changes I08cf22df,I535ee414,Ie84cfc96,I8c35ce4e,If7649764, ... into integration ...

* changes:
  mediatek: mt8183: Support coreboot configuration
  mediatek: mt8183: support system reset
  mediatek: mt8183: pass platform parameters
  mediatek: mt8183: add GPIO driver
  mediatek: mt8183: support system off
  mediatek: mt8183: support CPU hotplug
  mediatek: mt8183: refine GIC driver

Merge "mediatek: mt8173: apply MULTI_CONSOLE framework" into integration

amlogic: console: Move console driver to common directory ...

The code managing the console is the same for all the platforms
currently supported. Since it is unlikely to change in the future move
the code to an external file in the common directory.

Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: I6df555ea82d483b4f08a4a1e2cb0a7488fbaa015

mediatek: mt8173: apply MULTI_CONSOLE framework ...

- Switch uart driver from Mediatek 8250 to TI 16550
- Enable MULTI_CONSOLE

Signed-off-by: kenny liang <kenny.liang@mediatek.com>
Change-Id: Ie3948d9e64d05d29a1f69592792e277b680c4ed4

Merge "Tegra: memctrl_v2: fix "overflow before widen" coverity issue" into integration

Invalidate dcache build option for bl2 entry at EL3 ...

Some of the platform (ie. Agilex) make use of CCU IPs which will only be
initialized during bl2_el3_early_platform_setup. Any operation to the
cache beforehand will crash the platform. Hence, this will provide an
option to skip the data cache invalidation upon bl2 entry at EL3

Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I2c924ed0589a72d0034714c31be8fe57237d1f06

Merge "intel: agilex: Fix psci power domain off" into integration

Merge "plat: xilinx: zynqmp: Initialize IPI table from zynqmp_config_setup()" into integration

Merge "Add UBSAN support and handlers" into integration

Merge changes I072c0f61,I798401f4,I9648ef55,I7225d9fa,Ife682288, ... into integration ...

* changes:
  rcar_gen3: drivers: ddr_b: Update DDR setting for H3, M3, M3N
  rcar_gen3: drivers: qos: update QoS setting
  rcar_gen3: drivers: ddr_b: Fix checkpatch errors in headers
  rcar_gen3: drivers: ddr_b: Fix line-over-80s
  rcar_gen3: drivers: ddr_b: Further checkpatch cleanups
  rcar_gen3: drivers: ddr_b: Clean up camel case
  rcar_get3: drivers: ddr_b: Basic checkpatch fixes
  rcar_get3: drivers: ddr: Partly unify register macros between DDR A and B
  rcar_get3: drivers: ddr: Clean up common code

Merge changes from topic "amlogic-refactoring" into integration ...

* changes:
  amlogic: Fix includes order
  amlogic: Fix header guards
  amlogic: Fix prefixes in the SoC specific files
  amlogic: Fix prefixes in the PM code
  amlogic: Fix prefixes in the SCPI related code
  amlogic: Fix prefixes in the MHU code
  amlogic: Fix prefixes in the SIP/SVC code
  amlogic: Fix prefixes in the thermal driver
  amlogic: Fix prefixes in the private header file
  amlogic: Fix prefixes in the efuse driver
  amlogic: Fix prefixes in the platform macros file
  amlogic: Fix prefixes in the helpers file
  amlogic: Rework Makefiles
  amlogic: Move the SIP SVC code to common directory
  amlogic: Move topology file to common directory
  amlogic: Move thermal code to common directory
  amlogic: Move MHU code to common directory
  amlogic: Move efuse code to common directory
  amlogic: Move platform macros assembly file to common directory
  amlogic: Introduce unified private header file
  amlogic: Move SCPI code to common directory
  amlogic: Move the SHA256 DMA driver to common directory
  amlogic: Move assembly helpers to common directory
  amlogic: Introduce directory parameters in the makefiles
  meson: Rename platform directory to amlogic

intel: agilex: Fix psci power domain off ...

Disable gic cpu interface for powered down cpu. This patch also removes
core reset during power off as core reset will be done during power on

Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I2ca96d876b6e71e56d24a9a7e184b6d6226b8673

amlogic: Fix includes order ...

As part of the code refactoring fix the order of the include files
across all the source files.

Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: Ice72f687cc26ee881a9051168149467688100cfb

amlogic: Fix header guards ...

Make the header guards more generic and contextually remove the
GXBB_BL31_PLAT_PARAM_VAL value that is unused on the GXL platform.

Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: I842fa2e084e71280ae17b39c67877e844821a171

Modify FVP makefile for cores that support both AArch64/32 ...

Some cores support only AArch64 from EL1 and above, e.g. A76, N1 etc. If
TF-A is compiled with CTX_INCLUDE_AARCH32_REGS=0 so as to properly
handle those cores, only the AArch64 cores' assembly is included in the
TF-A binary. In other words, for FVP, TF-A assumes that AArch64 only
cores will never exist in the same cluster with cores that also support
AArch32.

However, A55 and A75 can be used as AArch64 only cores, despite
supporting AArch32, too. This patch enables A55 and A75 to exist in
clusters together with AArch64 cores.

Change-Id: I58750ad6c3d76ce77eb354784c2a42f2c179031d
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>

Add UBSAN support and handlers ...

This patch adds support for the Undefined Behaviour sanitizer. There are
two types of support offered - minimalistic trapping support which
essentially immediately crashes on undefined behaviour and full support
with full debug messages.

The full support relies on ubsan.c which has been adapted from code used
by OPTEE.

Change-Id: I417c810f4fc43dcb56db6a6a555bfd0b38440727
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>

plat: xilinx: zynqmp: Initialize IPI table from zynqmp_config_setup() ...

Common ipi_table needs to be initialized before using any
IPI command (i.e send/receive). Move zynqmp ipi config table
initialization from sip_svc_setup() to zynqmp_config_setup().

Change-Id: Ic8aaa0728a43936cd4c6e1ed590e01ba8f0fbf5b
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>

stm32mp1: manage CONSOLE_FLAG_TRANSLATE_CRLF and cleanup driver ...

The STM32 console driver was pre-pending '\r' before '\n'.
It is now managed by the framework with the flag:
CONSOLE_FLAG_TRANSLATE_CRLF.
Remove the code in driver, and add the flag for STM32MP1.

Change-Id: I5d0d5d5c4abee0b7dc11c2f8707b1b5cf10149ab
Signed-off-by: Yann Gautier <yann.gautier@st.com>