if ARCH_AT91
config ARCH_TEXT_BASE
hex
default 0x73f00000 if ARCH_AT91SAM9G45
default 0x23f00000
config BOARDINFO
default "Atmel at91rm9200-ek" if MACH_AT91RM9200EK
default "Atmel 91SAM9260-EK" if MACH_AT91SAM9260EK
default "Atmel at91sam9261-ek" if MACH_AT91SAM9261EK
default "Atmel at91sam9263-ek" if MACH_AT91SAM9263EK
default "Atmel at91sam9g10-ek" if MACH_AT91SAM9G10EK
default "Atmel at91sam9g20-ek" if MACH_AT91SAM9G20EK
default "Atmel at91sam9m10g45-ek" if MACH_AT91SAM9M10G45EK
default "Bucyrus MMC-CPU" if MACH_MMCCPU
default "Calao USB-A9260" if MACH_USB_A9260
default "Calao USB-A9263" if MACH_USB_A9263
default "Calao USB-A9G20" if MACH_USB_A9G20
default "Ronetix PM9261" if MACH_PM9261
default "Ronetix PM9263" if MACH_PM9263
default "Ronetix PM9G45" if MACH_PM9G45
default "Aizo dSS11" if MACH_DSS11
default "Calao TNY-A9260" if MACH_TNY_A9260
default "Calao TNY-A9263" if MACH_TNY_A9263
default "Calao TNY-A9G20" if MACH_TNY_A9G20
config HAVE_NAND_ATMEL_BUSWIDTH_16
bool
config AT91SAM9_RESET
bool
config AT91SAM9G45_RESET
bool
comment "Atmel AT91 System-on-Chip"
choice
prompt "Atmel AT91 Processor"
config ARCH_AT91RM9200
bool "AT91RM9200"
select CPU_ARM920T
select HAS_AT91_ETHER
select ARCH_HAS_LOWLEVEL_INIT
select MACH_HAS_LOWLEVEL_INIT
select MACH_DO_LOWLEVEL_INIT
config ARCH_AT91SAM9260
bool "AT91SAM9260"
select CPU_ARM926T
select HAS_MACB
select AT91SAM9_RESET
config ARCH_AT91SAM9261
bool "AT91SAM9261"
select CPU_ARM926T
select AT91SAM9_RESET
config ARCH_AT91SAM9263
bool "AT91SAM9263"
select CPU_ARM926T
select HAS_MACB
select AT91SAM9_RESET
config ARCH_AT91SAM9G10
bool "AT91SAM9G10"
select CPU_ARM926T
select AT91SAM9_RESET
config ARCH_AT91SAM9G20
bool "AT91SAM9G20"
select CPU_ARM926T
select HAS_MACB
select AT91SAM9_RESET
config ARCH_AT91SAM9G45
bool "AT91SAM9G45 or AT91SAM9M10"
select CPU_ARM926T
select HAS_MACB
select AT91SAM9G45_RESET
endchoice
config ARCH_BAREBOX_MAX_BARE_INIT_SIZE
hex
default 0x1000 if ARCH_AT91SAM9260
default 0x270000 if ARCH_AT91SAM9261
default 0x12000 if ARCH_AT91SAM9263
default 0x4000 if ARCH_AT91SAM9G20
default 0x3000 if ARCH_AT91SAM9G10
default 0xF000 if ARCH_AT91SAM9G45
default 0xffffffff
# ----------------------------------------------------------
if ARCH_AT91RM9200
choice
prompt "AT91RM9200 Board Type"
config MACH_AT91RM9200EK
bool "Atmel AT91RM9200-EK Evaluation Kit"
help
Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
endchoice
endif
# ----------------------------------------------------------
if ARCH_AT91SAM9260
choice
prompt "AT91SAM9260 Board Type"
config MACH_AT91SAM9260EK
bool "Atmel AT91SAM9260-EK"
select HAVE_NAND_ATMEL_BUSWIDTH_16
help
Say y here if you are using Atmel's AT91SAM9260-EK Evaluation board
config MACH_TNY_A9260
bool "CALAO TNY-A9260"
help
Select this if you are using a Calao Systems TNY-A9260.
<http://www.calao-systems.com>
config MACH_USB_A9260
bool "CALAO USB-A9260"
help
Select this if you are using a Calao Systems USB-A9260.
<http://www.calao-systems.com>
endchoice
endif
# ----------------------------------------------------------
if ARCH_AT91SAM9261
choice
prompt "AT91SAM9261 Board Type"
config MACH_AT91SAM9261EK
bool "Atmel AT91SAM9261-EK Evaluation Kit"
select HAS_DM9000
select HAVE_NAND_ATMEL_BUSWIDTH_16
help
Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
config MACH_PM9261
bool "Ronetix PM9261"
select HAS_DM9000
select MACH_HAS_LOWLEVEL_INIT
help
Say y here if you are using the Ronetix PM9261 Board
endchoice
endif
# ----------------------------------------------------------
if ARCH_AT91SAM9G10
choice
prompt "AT91SAM9G10 Board Type"
config MACH_AT91SAM9G10EK
bool "Atmel AT91SAM9G10-EK Evaluation Kit"
select HAVE_NAND_ATMEL_BUSWIDTH_16
select HAS_DM9000
help
Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
endchoice
endif
# ----------------------------------------------------------
if ARCH_AT91SAM9G20
choice
prompt "AT91SAM9G20 Board Type"
config MACH_AT91SAM9G20EK
bool "Atmel AT91SAM9G20-EK Evaluation Kit"
select HAVE_NAND_ATMEL_BUSWIDTH_16
help
Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
that embeds only one SD/MMC slot.
config MACH_TNY_A9G20
bool "CALAO TNY-A9G20"
help
Select this if you are using a Calao Systems TNY-A9G20.
<http://www.calao-systems.com>
config MACH_USB_A9G20
bool "CALAO USB-A9G20"
help
Select this if you are using a Calao Systems USB-A9G20.
<http://www.calao-systems.com>
config MACH_DSS11
bool "aizo dSS11"
select HAVE_NAND_ATMEL_BUSWIDTH_16
help
Select this if you are using aizo dSS11
that embeds only one SD/MMC slot.
endchoice
endif
# ----------------------------------------------------------
if ARCH_AT91SAM9263
choice
prompt "AT91SAM9263 Board Type"
config MACH_AT91SAM9263EK
bool "Atmel AT91SAM9263-EK"
select MACH_HAS_LOWLEVEL_INIT
select HAVE_NAND_ATMEL_BUSWIDTH_16
help
Say y here if you are using Atmel's AT91SAM9263-EK Evaluation board
config MACH_MMCCPU
bool "Bucyrus MMC-CPU"
help
Say y here if you are using the Bucyrus MMC-CPU
config MACH_PM9263
bool "Ronetix PM9263"
select MACH_HAS_LOWLEVEL_INIT
help
Say y here if you are using the Ronetix PM9263 Board
config MACH_TNY_A9263
bool "CALAO TNY-A9263"
help
Select this if you are using a Calao Systems TNY-A9263.
<http://www.calao-systems.com>
config MACH_USB_A9263
bool "CALAO USB-A9263"
help
Select this if you are using a Calao Systems USB-A9263.
<http://www.calao-systems.com>
endchoice
endif
if ARCH_AT91SAM9G45
choice
prompt "AT91SAM9G45 or AT91SAM9M10 Board Type"
config MACH_AT91SAM9M10G45EK
bool "Atmel AT91SAM9M10G45-EK Evaluation Kit"
select HAVE_NAND_ATMEL_BUSWIDTH_16
help
Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit
or AT91SAM9G45-EKES or AT91SAM9M10-EKES (for those 2 select the LG LCD)
<http://atmel.com/dyn/products/tools_card_v2.asp?tool_id=4735>
config MACH_PM9G45
bool "Ronetix PM9G45"
help
Say y here if you are using the Ronetix PM9G45 Board
endchoice
endif
# ----------------------------------------------------------
comment "AT91 Board Options"
config MTD_NAND_ATMEL_BUSWIDTH_16
bool "Enable 16-bit data bus interface to NAND flash"
depends on HAVE_NAND_ATMEL_BUSWIDTH_16
help
On AT91SAM926x boards both types of NAND flash can be present
(8 and 16 bit data bus width).
config AT91_HAVE_2MMC
bool "Have 2 MMC"
depends on MACH_AT91SAM9G20EK
help
Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
onwards.
config AT91_HAVE_SRAM_128M
bool "Have 128 of ram"
depends on MACH_USB_A9G20 || MACH_USB_A9263
help
Select this if you board have 128 MiB of Ram (as USB_A9G20 C11)
choice
prompt "LCD type"
depends on MACH_AT91SAM9M10G45EK
config LCD_TRULY_TFT1N4633E
bool "truly TFT1N4633-E"
help
Found on AT91SAM9M10G45-EK
config LCD_LG_LB043WQ1
bool "LG philips LB043WQ1"
help
Found on AT91SAM9G45-EKES and AT91SAM9M10-EKES
endchoice
endif
