/*
* Copyright 2012 Pengutronix
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
#include "imx53.dtsi"
#include <arm/imx53.dtsi>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "Garz & Fricke VINCELL";
compatible = "guf,imx53-vincell", "fsl,imx53";
chosen {
linux,stdout-path = &uart2;
};
memory {
reg = <0x70000000 0x20000000>;
};
clocks {
ckih1 {
clock-frequency = <0>;
};
};
panel: panel {
compatible = "ampire,am800480r3tmqwa1h", "simple-panel";
enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
backlight = <&backlight>;
port {
panel_in: endpoint {
remote-endpoint = <&lvds0_out>;
};
};
};
leds {
compatible = "gpio-leds";
user {
label = "Heartbeat";
gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm2 0 50000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
enable-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
};
regulators {
compatible = "simple-bus";
reg_3p2v: 3p2v {
compatible = "regulator-fixed";
regulator-name = "3P2V";
regulator-min-microvolt = <3200000>;
regulator-max-microvolt = <3200000>;
regulator-always-on;
};
};
};
&audmux {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_audmux>;
status = "okay";
};
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
cd-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec>;
phy-mode = "rmii";
phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
bitrate = <100000>;
status = "okay";
pmic: dialog@48 { /* DA9053-3HHA1 PMIC */
compatible = "dialog,da9053-aa", "dialog,da9052";
reg = <0x48>;
interrupt-parent = <&gpio7>;
interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
regulators {
buck1 { /* CORE */
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <2075000>;
regulator-always-on;
regulator-boot-on;
};
buck2 { /* PRO */
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <2075000>;
regulator-always-on;
regulator-boot-on;
};
buck3 { /* MEM */
regulator-min-microvolt = <925000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
regulator-boot-on;
};
buck4 { /* PERI */
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3600000>;
regulator-always-on;
regulator-boot-on;
};
ldo1 {
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
ldo2 {
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
ldo3 {
regulator-min-microvolt = <1725000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
};
ldo4 {
regulator-min-microvolt = <1725000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
};
ldo5 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3600000>;
regulator-always-on;
regulator-boot-on;
};
ldo6 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3600000>;
regulator-always-on;
regulator-boot-on;
};
ldo7 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3600000>;
regulator-always-on;
regulator-boot-on;
};
ldo8 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3600000>;
regulator-always-on;
regulator-boot-on;
};
ldo9 {
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <3650000>;
regulator-always-on;
regulator-boot-on;
};
ldo10 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3600000>;
regulator-always-on;
regulator-boot-on;
};
};
};
temperature-sensor@49 {
compatible = "ti,lm73";
reg = <0x49>;
};
eeprom@50 {
compatible = "st,m24c32";
reg = <0x50>;
status = "disabled";
};
rtc: nxp@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
};
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
bitrate = <100000>;
status = "disabled";
};
&ldb {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lvds0>;
status = "okay";
lvds-channel@0 {
status = "okay";
fsl,data-mapping = "jeida";
fsl,data-width = <24>;
port@1 {
reg = <1>;
lvds0_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
};
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
status = "disabled";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
imx53-vincell {
pinctrl_hog: hoggrp {
fsl,pins = <
MX53_PAD_DISP0_DAT8__GPIO4_29 0x80000000
MX53_PAD_DISP0_DAT14__GPIO5_8 0x80000000
MX53_PAD_DISP0_DAT15__GPIO5_9 0x80000000
MX53_PAD_DISP0_DAT16__GPIO5_10 0x80000000
MX53_PAD_DISP0_DAT17__GPIO5_11 0x80000000
MX53_PAD_CSI0_PIXCLK__GPIO5_18 0x80000000
MX53_PAD_CSI0_MCLK__GPIO5_19 0x80000000
MX53_PAD_CSI0_DATA_EN__GPIO5_20 0x80000000
MX53_PAD_CSI0_VSYNC__GPIO5_21 0x80000000
MX53_PAD_CSI0_DAT4__GPIO5_22 0x80000000
MX53_PAD_CSI0_DAT5__GPIO5_23 0x80000000
MX53_PAD_CSI0_DAT6__GPIO5_24 0x80000000
MX53_PAD_EIM_EB2__GPIO2_30 0x80000000
MX53_PAD_GPIO_10__GPIO4_0 0x80000000
MX53_PAD_GPIO_11__GPIO4_1 0x80000000
MX53_PAD_GPIO_12__GPIO4_2 0x80000000
MX53_PAD_GPIO_13__GPIO4_3 0x80000000
MX53_PAD_PATA_DIOW__GPIO6_17 0x80000000
MX53_PAD_PATA_DMACK__GPIO6_18 0x80000000
MX53_PAD_PATA_RESET_B__GPIO7_4 0x80000000
MX53_PAD_PATA_IORDY__GPIO7_5 0x80000000
MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000
MX53_PAD_PATA_DA_2__GPIO7_8 0x80000000
MX53_PAD_PATA_DATA0__GPIO2_0 0x80000000
MX53_PAD_PATA_DATA1__GPIO2_1 0x80000000
MX53_PAD_PATA_DATA2__GPIO2_2 0x000001c5 /* BL_ON */
MX53_PAD_PATA_DATA3__GPIO2_3 0x000000c4 /* SEL6_8 */
MX53_PAD_PATA_DATA4__PATA_DATA_4 0x80000000
MX53_PAD_PATA_DATA5__GPIO2_5 0x000000c4 /* LCD_ENA */
MX53_PAD_PATA_DATA6__GPIO2_6 0x80000000
MX53_PAD_PATA_DATA7__GPIO2_7 0x80000000
MX53_PAD_PATA_DATA8__GPIO2_8 0x80000000
MX53_PAD_PATA_DATA9__GPIO2_9 0x80000000
MX53_PAD_PATA_DATA10__GPIO2_10 0x80000000
MX53_PAD_PATA_DATA11__GPIO2_11 0x80000000
MX53_PAD_PATA_DATA13__GPIO2_13 0x80000000
MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000
MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000
MX53_PAD_SD2_CLK__GPIO1_10 0x80000000
MX53_PAD_SD2_DATA3__GPIO1_12 0x80000000
MX53_PAD_GPIO_2__GPIO1_2 0x80000000
MX53_PAD_GPIO_4__GPIO1_4 0x80000000
MX53_PAD_GPIO_17__GPIO7_12 0x000000e0 /* PMIC_nIRQ, 100 KOhm pull up */
MX53_PAD_GPIO_18__GPIO7_13 0x80000000
MX53_PAD_DISP0_DAT8__PWM1_PWMO 0x80000000
MX53_PAD_DISP0_DAT9__PWM2_PWMO 0x000000c4 /* PWM2 out */
>;
};
pinctrl_audmux: audmuxgrp {
fsl,pins = <
MX53_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC 0x80000000
MX53_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD 0x80000000
MX53_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS 0x80000000
MX53_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD 0x80000000
>;
};
pinctrl_esdhc1: esdhc1grp {
fsl,pins = <
MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5
MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5
MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5
MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5
MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5
MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5
>;
};
pinctrl_fec: fecgrp {
fsl,pins = <
MX53_PAD_FEC_MDC__FEC_MDC 0x80000000
MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000
MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000
MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000
MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000
MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000
MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000
MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000
MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX53_PAD_CSI0_DAT8__I2C1_SDA 0xc0000000
MX53_PAD_CSI0_DAT9__I2C1_SCL 0xc0000000
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX53_PAD_KEY_ROW3__I2C2_SDA 0xc0000000
MX53_PAD_KEY_COL3__I2C2_SCL 0xc0000000
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1c5
MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1c5
MX53_PAD_PATA_INTRQ__UART2_CTS 0x1c5
MX53_PAD_PATA_DIOR__UART2_RTS 0x1c5
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1c5
MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1c5
>;
};
pinctrl_lvds0: lvds0grp {
fsl,pins = <
MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000
MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000
MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000
MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000
MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000
>;
};
};
};
