// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2019 NXP
*/
#include <dt-bindings/clock/imx8mn-clock.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
#include "imx8mn-pinfunc.h"
/ {
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
aliases {
ethernet0 = &fec1;
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
gpio3 = &gpio4;
gpio4 = &gpio5;
i2c0 = &i2c1;
i2c1 = &i2c2;
i2c2 = &i2c3;
i2c3 = &i2c4;
mmc0 = &usdhc1;
mmc1 = &usdhc2;
mmc2 = &usdhc3;
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
serial3 = &uart4;
spi0 = &ecspi1;
spi1 = &ecspi2;
spi2 = &ecspi3;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
idle-states {
entry-method = "psci";
cpu_pd_wait: cpu-pd-wait {
compatible = "arm,idle-state";
arm,psci-suspend-param = <0x0010033>;
local-timer-stop;
entry-latency-us = <1000>;
exit-latency-us = <700>;
min-residency-us = <2700>;
};
};
A53_0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0>;
clock-latency = <61036>;
clocks = <&clk IMX8MN_CLK_ARM>;
enable-method = "psci";
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
nvmem-cells = <&cpu_speed_grade>;
nvmem-cell-names = "speed_grade";
cpu-idle-states = <&cpu_pd_wait>;
#cooling-cells = <2>;
};
A53_1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x1>;
clock-latency = <61036>;
clocks = <&clk IMX8MN_CLK_ARM>;
enable-method = "psci";
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
cpu-idle-states = <&cpu_pd_wait>;
#cooling-cells = <2>;
};
A53_2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x2>;
clock-latency = <61036>;
clocks = <&clk IMX8MN_CLK_ARM>;
enable-method = "psci";
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
cpu-idle-states = <&cpu_pd_wait>;
#cooling-cells = <2>;
};
A53_3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x3>;
clock-latency = <61036>;
clocks = <&clk IMX8MN_CLK_ARM>;
enable-method = "psci";
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
cpu-idle-states = <&cpu_pd_wait>;
#cooling-cells = <2>;
};
A53_L2: l2-cache0 {
compatible = "cache";
};
};
a53_opp_table: opp-table {
compatible = "operating-points-v2";
opp-shared;
opp-1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <850000>;
opp-supported-hw = <0xb00>, <0x7>;
clock-latency-ns = <150000>;
opp-suspend;
};
opp-1400000000 {
opp-hz = /bits/ 64 <1400000000>;
opp-microvolt = <950000>;
opp-supported-hw = <0x300>, <0x7>;
clock-latency-ns = <150000>;
opp-suspend;
};
opp-1500000000 {
opp-hz = /bits/ 64 <1500000000>;
opp-microvolt = <1000000>;
opp-supported-hw = <0x100>, <0x3>;
clock-latency-ns = <150000>;
opp-suspend;
};
};
osc_32k: clock-osc-32k {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
clock-output-names = "osc_32k";
};
osc_24m: clock-osc-24m {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
clock-output-names = "osc_24m";
};
clk_ext1: clock-ext1 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <133000000>;
clock-output-names = "clk_ext1";
};
clk_ext2: clock-ext2 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <133000000>;
clock-output-names = "clk_ext2";
};
clk_ext3: clock-ext3 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <133000000>;
clock-output-names = "clk_ext3";
};
clk_ext4: clock-ext4 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency= <133000000>;
clock-output-names = "clk_ext4";
};
psci {
compatible = "arm,psci-1.0";
method = "smc";
};
thermal-zones {
cpu-thermal {
polling-delay-passive = <250>;
polling-delay = <2000>;
thermal-sensors = <&tmu>;
trips {
cpu_alert0: trip0 {
temperature = <85000>;
hysteresis = <2000>;
type = "passive";
};
cpu_crit0: trip1 {
temperature = <95000>;
hysteresis = <2000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu_alert0>;
cooling-device =
<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
clock-frequency = <8000000>;
arm,no-tick-in-suspend;
};
soc@0 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x0 0x3e000000>;
aips1: bus@30000000 {
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x30000000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
gpio1: gpio@30200000 {
compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio";
reg = <0x30200000 0x10000>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_GPIO1_ROOT>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 10 30>;
};
gpio2: gpio@30210000 {
compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio";
reg = <0x30210000 0x10000>;
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_GPIO2_ROOT>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 40 21>;
};
gpio3: gpio@30220000 {
compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio";
reg = <0x30220000 0x10000>;
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_GPIO3_ROOT>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 61 26>;
};
gpio4: gpio@30230000 {
compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio";
reg = <0x30230000 0x10000>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_GPIO4_ROOT>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 21 108 11>;
};
gpio5: gpio@30240000 {
compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio";
reg = <0x30240000 0x10000>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_GPIO5_ROOT>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 119 30>;
};
tmu: tmu@30260000 {
compatible = "fsl,imx8mn-tmu", "fsl,imx8mm-tmu";
reg = <0x30260000 0x10000>;
clocks = <&clk IMX8MN_CLK_TMU_ROOT>;
#thermal-sensor-cells = <0>;
};
wdog1: watchdog@30280000 {
compatible = "fsl,imx8mn-wdt", "fsl,imx21-wdt";
reg = <0x30280000 0x10000>;
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_WDOG1_ROOT>;
status = "disabled";
};
wdog2: watchdog@30290000 {
compatible = "fsl,imx8mn-wdt", "fsl,imx21-wdt";
reg = <0x30290000 0x10000>;
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_WDOG2_ROOT>;
status = "disabled";
};
wdog3: watchdog@302a0000 {
compatible = "fsl,imx8mn-wdt", "fsl,imx21-wdt";
reg = <0x302a0000 0x10000>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_WDOG3_ROOT>;
status = "disabled";
};
sdma3: dma-controller@302b0000 {
compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma";
reg = <0x302b0000 0x10000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_SDMA3_ROOT>,
<&clk IMX8MN_CLK_SDMA3_ROOT>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
};
sdma2: dma-controller@302c0000 {
compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma";
reg = <0x302c0000 0x10000>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_SDMA2_ROOT>,
<&clk IMX8MN_CLK_SDMA2_ROOT>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
};
iomuxc: pinctrl@30330000 {
compatible = "fsl,imx8mn-iomuxc";
reg = <0x30330000 0x10000>;
};
gpr: iomuxc-gpr@30340000 {
compatible = "fsl,imx8mn-iomuxc-gpr", "syscon";
reg = <0x30340000 0x10000>;
};
ocotp: ocotp-ctrl@30350000 {
compatible = "fsl,imx8mn-ocotp", "fsl,imx8mm-ocotp", "syscon";
reg = <0x30350000 0x10000>;
clocks = <&clk IMX8MN_CLK_OCOTP_ROOT>;
#address-cells = <1>;
#size-cells = <1>;
cpu_speed_grade: speed-grade@10 {
reg = <0x10 4>;
};
};
anatop: anatop@30360000 {
compatible = "fsl,imx8mn-anatop", "fsl,imx8mm-anatop",
"syscon";
reg = <0x30360000 0x10000>;
};
snvs: snvs@30370000 {
compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd";
reg = <0x30370000 0x10000>;
snvs_rtc: snvs-rtc-lp {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
regmap = <&snvs>;
offset = <0x34>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_SNVS_ROOT>;
clock-names = "snvs-rtc";
};
snvs_pwrkey: snvs-powerkey {
compatible = "fsl,sec-v4.0-pwrkey";
regmap = <&snvs>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_SNVS_ROOT>;
clock-names = "snvs-pwrkey";
linux,keycode = <KEY_POWER>;
wakeup-source;
status = "disabled";
};
};
clk: clock-controller@30380000 {
compatible = "fsl,imx8mn-ccm";
reg = <0x30380000 0x10000>;
#clock-cells = <1>;
clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
<&clk_ext3>, <&clk_ext4>;
clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
"clk_ext3", "clk_ext4";
assigned-clocks = <&clk IMX8MN_CLK_A53_SRC>,
<&clk IMX8MN_CLK_A53_CORE>,
<&clk IMX8MN_CLK_NOC>,
<&clk IMX8MN_CLK_AUDIO_AHB>,
<&clk IMX8MN_CLK_IPG_AUDIO_ROOT>,
<&clk IMX8MN_SYS_PLL3>;
assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_800M>,
<&clk IMX8MN_ARM_PLL_OUT>,
<&clk IMX8MN_SYS_PLL3_OUT>,
<&clk IMX8MN_SYS_PLL1_800M>;
assigned-clock-rates = <0>, <0>, <0>,
<400000000>,
<400000000>,
<600000000>;
};
src: reset-controller@30390000 {
compatible = "fsl,imx8mn-src", "fsl,imx8mq-src", "syscon";
reg = <0x30390000 0x10000>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
#reset-cells = <1>;
};
};
aips2: bus@30400000 {
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x30400000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
pwm1: pwm@30660000 {
compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm";
reg = <0x30660000 0x10000>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_PWM1_ROOT>,
<&clk IMX8MN_CLK_PWM1_ROOT>;
clock-names = "ipg", "per";
#pwm-cells = <2>;
status = "disabled";
};
pwm2: pwm@30670000 {
compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm";
reg = <0x30670000 0x10000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_PWM2_ROOT>,
<&clk IMX8MN_CLK_PWM2_ROOT>;
clock-names = "ipg", "per";
#pwm-cells = <2>;
status = "disabled";
};
pwm3: pwm@30680000 {
compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm";
reg = <0x30680000 0x10000>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_PWM3_ROOT>,
<&clk IMX8MN_CLK_PWM3_ROOT>;
clock-names = "ipg", "per";
#pwm-cells = <2>;
status = "disabled";
};
pwm4: pwm@30690000 {
compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm";
reg = <0x30690000 0x10000>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_PWM4_ROOT>,
<&clk IMX8MN_CLK_PWM4_ROOT>;
clock-names = "ipg", "per";
#pwm-cells = <2>;
status = "disabled";
};
system_counter: timer@306a0000 {
compatible = "nxp,sysctr-timer";
reg = <0x306a0000 0x20000>;
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&osc_24m>;
clock-names = "per";
};
};
aips3: bus@30800000 {
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x30800000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
ecspi1: spi@30820000 {
compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x30820000 0x10000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_ECSPI1_ROOT>,
<&clk IMX8MN_CLK_ECSPI1_ROOT>;
clock-names = "ipg", "per";
dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
dma-names = "rx", "tx";
status = "disabled";
};
ecspi2: spi@30830000 {
compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x30830000 0x10000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_ECSPI2_ROOT>,
<&clk IMX8MN_CLK_ECSPI2_ROOT>;
clock-names = "ipg", "per";
dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
dma-names = "rx", "tx";
status = "disabled";
};
ecspi3: spi@30840000 {
compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x30840000 0x10000>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_ECSPI3_ROOT>,
<&clk IMX8MN_CLK_ECSPI3_ROOT>;
clock-names = "ipg", "per";
dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
dma-names = "rx", "tx";
status = "disabled";
};
uart1: serial@30860000 {
compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
reg = <0x30860000 0x10000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_UART1_ROOT>,
<&clk IMX8MN_CLK_UART1_ROOT>;
clock-names = "ipg", "per";
dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
dma-names = "rx", "tx";
status = "disabled";
};
uart3: serial@30880000 {
compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
reg = <0x30880000 0x10000>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_UART3_ROOT>,
<&clk IMX8MN_CLK_UART3_ROOT>;
clock-names = "ipg", "per";
dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
dma-names = "rx", "tx";
status = "disabled";
};
uart2: serial@30890000 {
compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
reg = <0x30890000 0x10000>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_UART2_ROOT>,
<&clk IMX8MN_CLK_UART2_ROOT>;
clock-names = "ipg", "per";
status = "disabled";
};
crypto: crypto@30900000 {
compatible = "fsl,sec-v4.0";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x30900000 0x40000>;
ranges = <0 0x30900000 0x40000>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_AHB>,
<&clk IMX8MN_CLK_IPG_ROOT>;
clock-names = "aclk", "ipg";
sec_jr0: jr@1000 {
compatible = "fsl,sec-v4.0-job-ring";
reg = <0x1000 0x1000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr1: jr@2000 {
compatible = "fsl,sec-v4.0-job-ring";
reg = <0x2000 0x1000>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr2: jr@3000 {
compatible = "fsl,sec-v4.0-job-ring";
reg = <0x3000 0x1000>;
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
};
};
i2c1: i2c@30a20000 {
compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x30a20000 0x10000>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_I2C1_ROOT>;
status = "disabled";
};
i2c2: i2c@30a30000 {
compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x30a30000 0x10000>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_I2C2_ROOT>;
status = "disabled";
};
i2c3: i2c@30a40000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c";
reg = <0x30a40000 0x10000>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_I2C3_ROOT>;
status = "disabled";
};
i2c4: i2c@30a50000 {
compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x30a50000 0x10000>;
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_I2C4_ROOT>;
status = "disabled";
};
uart4: serial@30a60000 {
compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
reg = <0x30a60000 0x10000>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_UART4_ROOT>,
<&clk IMX8MN_CLK_UART4_ROOT>;
clock-names = "ipg", "per";
dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>;
dma-names = "rx", "tx";
status = "disabled";
};
usdhc1: mmc@30b40000 {
compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc";
reg = <0x30b40000 0x10000>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_IPG_ROOT>,
<&clk IMX8MN_CLK_NAND_USDHC_BUS>,
<&clk IMX8MN_CLK_USDHC1_ROOT>;
clock-names = "ipg", "ahb", "per";
fsl,tuning-start-tap = <20>;
fsl,tuning-step= <2>;
bus-width = <4>;
status = "disabled";
};
usdhc2: mmc@30b50000 {
compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc";
reg = <0x30b50000 0x10000>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_IPG_ROOT>,
<&clk IMX8MN_CLK_NAND_USDHC_BUS>,
<&clk IMX8MN_CLK_USDHC2_ROOT>;
clock-names = "ipg", "ahb", "per";
fsl,tuning-start-tap = <20>;
fsl,tuning-step= <2>;
bus-width = <4>;
status = "disabled";
};
usdhc3: mmc@30b60000 {
compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc";
reg = <0x30b60000 0x10000>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_IPG_ROOT>,
<&clk IMX8MN_CLK_NAND_USDHC_BUS>,
<&clk IMX8MN_CLK_USDHC3_ROOT>;
clock-names = "ipg", "ahb", "per";
fsl,tuning-start-tap = <20>;
fsl,tuning-step= <2>;
bus-width = <4>;
status = "disabled";
};
sdma1: dma-controller@30bd0000 {
compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma";
reg = <0x30bd0000 0x10000>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_SDMA1_ROOT>,
<&clk IMX8MN_CLK_AHB>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
};
fec1: ethernet@30be0000 {
compatible = "fsl,imx8mn-fec", "fsl,imx6sx-fec";
reg = <0x30be0000 0x10000>;
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_ENET1_ROOT>,
<&clk IMX8MN_CLK_ENET1_ROOT>,
<&clk IMX8MN_CLK_ENET_TIMER>,
<&clk IMX8MN_CLK_ENET_REF>,
<&clk IMX8MN_CLK_ENET_PHY_REF>;
clock-names = "ipg", "ahb", "ptp",
"enet_clk_ref", "enet_out";
assigned-clocks = <&clk IMX8MN_CLK_ENET_AXI>,
<&clk IMX8MN_CLK_ENET_TIMER>,
<&clk IMX8MN_CLK_ENET_REF>,
<&clk IMX8MN_CLK_ENET_TIMER>;
assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_266M>,
<&clk IMX8MN_SYS_PLL2_100M>,
<&clk IMX8MN_SYS_PLL2_125M>;
assigned-clock-rates = <0>, <0>, <125000000>, <100000000>;
fsl,num-tx-queues = <3>;
fsl,num-rx-queues = <3>;
status = "disabled";
};
};
aips4: bus@32c00000 {
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x32c00000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
usbotg1: usb@32e40000 {
compatible = "fsl,imx8mn-usb", "fsl,imx7d-usb";
reg = <0x32e40000 0x200>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_USB1_CTRL_ROOT>;
clock-names = "usb1_ctrl_root_clk";
assigned-clocks = <&clk IMX8MN_CLK_USB_BUS>;
assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>;
fsl,usbphy = <&usbphynop1>;
fsl,usbmisc = <&usbmisc1 0>;
status = "disabled";
};
usbmisc1: usbmisc@32e40200 {
compatible = "fsl,imx8mn-usbmisc", "fsl,imx7d-usbmisc";
#index-cells = <1>;
reg = <0x32e40200 0x200>;
};
usbotg2: usb@32e50000 {
compatible = "fsl,imx8mn-usb", "fsl,imx7d-usb";
reg = <0x32e50000 0x200>;
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_USB1_CTRL_ROOT>;
clock-names = "usb1_ctrl_root_clk";
assigned-clocks = <&clk IMX8MN_CLK_USB_BUS>,
<&clk IMX8MN_CLK_USB_CORE_REF>;
assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>,
<&clk IMX8MN_SYS_PLL1_100M>;
fsl,usbphy = <&usbphynop2>;
fsl,usbmisc = <&usbmisc2 0>;
status = "disabled";
};
usbmisc2: usbmisc@32e50200 {
compatible = "fsl,imx8mn-usbmisc", "fsl,imx7d-usbmisc";
#index-cells = <1>;
reg = <0x32e50200 0x200>;
};
};
dma_apbh: dma-controller@33000000 {
compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh";
reg = <0x33000000 0x2000>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
#dma-cells = <1>;
dma-channels = <4>;
clocks = <&clk IMX8MN_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
};
gpmi: nand-controller@33002000 {
compatible = "fsl,imx8mn-gpmi-nand", "fsl,imx7d-gpmi-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
reg-names = "gpmi-nand", "bch";
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "bch";
clocks = <&clk IMX8MN_CLK_NAND_ROOT>,
<&clk IMX8MN_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
clock-names = "gpmi_io", "gpmi_bch_apb";
dmas = <&dma_apbh 0>;
dma-names = "rx-tx";
status = "disabled";
};
gic: interrupt-controller@38800000 {
compatible = "arm,gic-v3";
reg = <0x38800000 0x10000>,
<0x38880000 0xc0000>;
#interrupt-cells = <3>;
interrupt-controller;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
ddrc: memory-controller@3d400000 {
compatible = "fsl,imx8mn-ddrc", "fsl,imx8m-ddrc";
reg = <0x3d400000 0x400000>;
clock-names = "core", "pll", "alt", "apb";
clocks = <&clk IMX8MN_CLK_DRAM_CORE>,
<&clk IMX8MN_DRAM_PLL>,
<&clk IMX8MN_CLK_DRAM_ALT>,
<&clk IMX8MN_CLK_DRAM_APB>;
};
ddr-pmu@3d800000 {
compatible = "fsl,imx8mn-ddr-pmu", "fsl,imx8m-ddr-pmu";
reg = <0x3d800000 0x400000>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
};
};
usbphynop1: usbphynop1 {
compatible = "usb-nop-xceiv";
clocks = <&clk IMX8MN_CLK_USB_PHY_REF>;
assigned-clocks = <&clk IMX8MN_CLK_USB_PHY_REF>;
assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_100M>;
clock-names = "main_clk";
};
usbphynop2: usbphynop2 {
compatible = "usb-nop-xceiv";
clocks = <&clk IMX8MN_CLK_USB_PHY_REF>;
assigned-clocks = <&clk IMX8MN_CLK_USB_PHY_REF>;
assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_100M>;
clock-names = "main_clk";
};
};
