// SPDX-License-Identifier: GPL-2.0-only
#include "msm8916.dtsi"
#include "pm8916.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
aliases {
serial0 = &blsp1_uart2;
};
chosen {
stdout-path = "serial0";
};
reserved-memory {
/* Additional memory used by Samsung firmware modifications */
tz-apps@85500000 {
reg = <0x0 0x85500000 0x0 0xb00000>;
no-map;
};
};
soc {
sdhci@7824000 {
status = "okay";
vmmc-supply = <&pm8916_l8>;
vqmmc-supply = <&pm8916_l5>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
};
sdhci@7864000 {
status = "okay";
vmmc-supply = <&pm8916_l11>;
vqmmc-supply = <&pm8916_l12>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
};
serial@78b0000 {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp1_uart2_default>;
pinctrl-1 = <&blsp1_uart2_sleep>;
};
usb@78d9000 {
status = "okay";
extcon = <&muic>, <&muic>;
hnp-disable;
srp-disable;
adp-disable;
ulpi {
phy {
extcon = <&muic>;
v1p8-supply = <&pm8916_l7>;
v3p3-supply = <&pm8916_l13>;
};
};
};
mdss@1a00000 {
dsi@1a98000 {
#address-cells = <1>;
#size-cells = <0>;
vdda-supply = <&pm8916_l2>;
vddio-supply = <&pm8916_l6>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&mdss_default>;
pinctrl-1 = <&mdss_sleep>;
};
dsi-phy@1a98300 {
vddio-supply = <&pm8916_l6>;
};
};
wcnss@a21b000 {
status = "okay";
};
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_default>;
label = "GPIO Buttons";
volume-up {
label = "Volume Up";
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
};
home {
label = "Home";
gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOMEPAGE>;
};
};
gpio-hall-sensor {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&gpio_hall_sensor_default>;
label = "GPIO Hall Effect Sensor";
hall-sensor {
label = "Hall Effect Sensor";
gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
linux,code = <SW_LID>;
linux,can-disable;
};
};
reg_vdd_tsp: regulator-vdd-tsp {
compatible = "regulator-fixed";
regulator-name = "vdd_tsp";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
pinctrl-0 = <&tsp_en_default>;
};
i2c-muic {
compatible = "i2c-gpio";
sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
scl-gpios = <&msmgpio 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
#address-cells = <1>;
#size-cells = <0>;
muic: sm5502@25 {
compatible = "siliconmitus,sm5502-muic";
reg = <0x25>;
interrupt-parent = <&msmgpio>;
interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&muic_int_default>;
};
};
};
&msmgpio {
gpio_keys_default: gpio-keys-default {
pinmux {
function = "gpio";
pins = "gpio107", "gpio109";
};
pinconf {
pins = "gpio107", "gpio109";
drive-strength = <2>;
bias-pull-up;
};
};
gpio_hall_sensor_default: gpio-hall-sensor-default {
pinmux {
function = "gpio";
pins = "gpio52";
};
pinconf {
pins = "gpio52";
drive-strength = <2>;
bias-disable;
};
};
muic_int_default: muic-int-default {
pinmux {
function = "gpio";
pins = "gpio12";
};
pinconf {
pins = "gpio12";
drive-strength = <2>;
bias-disable;
};
};
tsp_en_default: tsp-en-default {
pinmux {
function = "gpio";
pins = "gpio73";
};
pinconf {
pins = "gpio73";
drive-strength = <2>;
bias-disable;
};
};
pmx-mdss {
mdss_default: mdss-default {
pinmux {
function = "gpio";
pins = "gpio25";
};
pinconf {
pins = "gpio25";
drive-strength = <8>;
bias-disable;
};
};
mdss_sleep: mdss-sleep {
pinmux {
function = "gpio";
pins = "gpio25";
};
pinconf {
pins = "gpio25";
drive-strength = <2>;
bias-pull-down;
};
};
};
};
&smd_rpm_regulators {
vdd_l1_l2_l3-supply = <&pm8916_s3>;
vdd_l4_l5_l6-supply = <&pm8916_s4>;
vdd_l7-supply = <&pm8916_s4>;
s1 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1300000>;
};
s3 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1300000>;
};
s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2100000>;
};
l1 {
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
};
l2 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
l3 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1287500>;
};
l4 {
regulator-min-microvolt = <2050000>;
regulator-max-microvolt = <2050000>;
};
l5 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
l6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
l7 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
l8 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2900000>;
};
l9 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
l10 {
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2800000>;
};
l11 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
regulator-allow-set-load;
regulator-system-load = <200000>;
};
l12 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
};
l13 {
regulator-min-microvolt = <3075000>;
regulator-max-microvolt = <3075000>;
};
l14 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
};
l15 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
};
l16 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
};
l17 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
};
l18 {
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2700000>;
};
};
&spmi_bus {
pm8916@0 {
pon@800 {
volume-down {
compatible = "qcom,pm8941-resin";
interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
bias-pull-up;
linux,code = <KEY_VOLUMEDOWN>;
};
};
};
};
