// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
* Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
* Copyright (c) 2020 Tobias Schramm <t.schramm@manjaro.org>
*/
/dts-v1/;
#include <dt-bindings/input/gpio-keys.h>
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/pwm/pwm.h>
#include <dt-bindings/usb/pd.h>
#include <dt-bindings/leds/common.h>
#include "rk3399.dtsi"
#include "rk3399-opp.dtsi"
/ {
model = "Pine64 Pinebook Pro";
compatible = "pine64,pinebook-pro", "rockchip,rk3399";
chosen {
stdout-path = "serial2:1500000n8";
};
backlight: edp-backlight {
compatible = "pwm-backlight";
power-supply = <&vcc_12v>;
pwms = <&pwm0 0 740740 0>;
};
edp_panel: edp-panel {
compatible = "boe,nv140fhmn49";
backlight = <&backlight>;
enable-gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&panel_en_gpio>;
power-supply = <&vcc3v3_panel>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
panel_in_edp: endpoint@0 {
reg = <0>;
remote-endpoint = <&edp_out_panel>;
};
};
};
};
/*
* Use separate nodes for gpio-keys to allow for selective deactivation
* of wakeup sources via sysfs without disabling the whole key
*/
gpio-key-lid {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&lidbtn_gpio>;
lid {
debounce-interval = <20>;
gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_LOW>;
label = "Lid";
linux,code = <SW_LID>;
linux,input-type = <EV_SW>;
wakeup-event-action = <EV_ACT_DEASSERTED>;
wakeup-source;
};
};
gpio-key-power {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pwrbtn_gpio>;
power {
debounce-interval = <20>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "Power";
linux,code = <KEY_POWER>;
wakeup-source;
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pwr_led_pin &slp_led_pin>;
green_led: led-0 {
color = <LED_COLOR_ID_GREEN>;
default-state = "on";
function = LED_FUNCTION_POWER;
gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
label = "green:power";
};
red_led: led-1 {
color = <LED_COLOR_ID_RED>;
default-state = "off";
function = LED_FUNCTION_STANDBY;
gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
label = "red:standby";
panic-indicator;
retain-state-suspended;
};
};
/* Power sequence for SDIO WiFi module */
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&rk808 1>;
clock-names = "ext_clock";
pinctrl-names = "default";
pinctrl-0 = <&wifi_enable_h_gpio>;
post-power-on-delay-ms = <100>;
power-off-delay-us = <500000>;
/* WL_REG_ON on module */
reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
};
/* Audio components */
es8316-sound {
compatible = "simple-audio-card";
pinctrl-names = "default";
pinctrl-0 = <&hp_det_gpio>;
simple-audio-card,name = "rockchip,es8316-codec";
simple-audio-card,format = "i2s";
simple-audio-card,mclk-fs = <256>;
simple-audio-card,widgets =
"Microphone", "Mic Jack",
"Headphone", "Headphones",
"Speaker", "Speaker";
simple-audio-card,routing =
"MIC1", "Mic Jack",
"Headphones", "HPOL",
"Headphones", "HPOR",
"Speaker Amplifier INL", "HPOL",
"Speaker Amplifier INR", "HPOR",
"Speaker", "Speaker Amplifier OUTL",
"Speaker", "Speaker Amplifier OUTR";
simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
simple-audio-card,aux-devs = <&speaker_amp>;
simple-audio-card,pin-switches = "Speaker";
simple-audio-card,cpu {
sound-dai = <&i2s1>;
};
simple-audio-card,codec {
sound-dai = <&es8316>;
};
};
speaker_amp: speaker-amplifier {
compatible = "simple-audio-amplifier";
enable-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
sound-name-prefix = "Speaker Amplifier";
VCC-supply = <&pa_5v>;
};
/* Power tree */
/* Root power source */
vcc_sysin: vcc-sysin {
compatible = "regulator-fixed";
regulator-name = "vcc_sysin";
regulator-always-on;
regulator-boot-on;
};
/* Regulators supplied by vcc_sysin */
/* LCD backlight supply */
vcc_12v: vcc-12v {
compatible = "regulator-fixed";
regulator-name = "vcc_12v";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
vin-supply = <&vcc_sysin>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
/* Main 3.3 V supply */
vcc3v3_sys: wifi_bat: vcc3v3-sys {
compatible = "regulator-fixed";
regulator-name = "vcc3v3_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc_sysin>;
regulator-state-mem {
regulator-on-in-suspend;
};
};
/* 5 V USB power supply */
vcc5v0_usb: pa_5v: vcc5v0-usb-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pwr_5v_gpio>;
regulator-name = "vcc5v0_usb";
regulator-always-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc_sysin>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
/* RK3399 logic supply */
vdd_log: vdd-log {
compatible = "pwm-regulator";
pwms = <&pwm2 0 25000 1>;
regulator-name = "vdd_log";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
vin-supply = <&vcc_sysin>;
regulator-state-mem {
regulator-on-in-suspend;
};
};
/* Regulators supplied by vcc3v3_sys */
/* 0.9 V supply, always on */
vcc_0v9: vcc-0v9 {
compatible = "regulator-fixed";
regulator-name = "vcc_0v9";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
vin-supply = <&vcc3v3_sys>;
};
/* S3 1.8 V supply, switched by vcc1v8_s3 */
vcca1v8_s3: vcc1v8-s3 {
compatible = "regulator-fixed";
regulator-name = "vcca1v8_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&vcc3v3_sys>;
};
/* micro SD card power */
vcc3v0_sd: vcc3v0-sd {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc0_pwr_h_gpio>;
regulator-name = "vcc3v0_sd";
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
vin-supply = <&vcc3v3_sys>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
/* LCD panel power, called VCC3V3_S0 in schematic */
vcc3v3_panel: vcc3v3-panel {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&lcdvcc_en_gpio>;
regulator-name = "vcc3v3_panel";
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-enable-ramp-delay = <100000>;
vin-supply = <&vcc3v3_sys>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
/* M.2 adapter power, switched by vcc1v8_s3 */
vcc3v3_ssd: vcc3v3-ssd {
compatible = "regulator-fixed";
regulator-name = "vcc3v3_ssd";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc3v3_sys>;
};
/* Regulators supplied by vcc5v0_usb */
/* USB 3 port power supply regulator */
vcc5v0_otg: vcc5v0-otg {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_host_en_gpio>;
regulator-name = "vcc5v0_otg";
regulator-always-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v0_usb>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
/* Regulators supplied by vcc5v0_usb */
/* Type C port power supply regulator */
vbus_5vout: vbus_typec: vbus-5vout {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_typec0_en_gpio>;
regulator-name = "vbus_5vout";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v0_usb>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
/* Regulators supplied by vcc_1v8 */
/* Primary 0.9 V LDO */
vcca0v9_s3: vcca0v9-s3 {
compatible = "regulator-fixed";
regulator-name = "vcc0v9_s3";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc_1v8>;
regulator-state-mem {
regulator-on-in-suspend;
};
};
mains_charger: dc-charger {
compatible = "gpio-charger";
charger-type = "mains";
gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_LOW>;
/* Also triggered by USB charger */
pinctrl-names = "default";
pinctrl-0 = <&dc_det_gpio>;
};
};
&cdn_dp {
status = "okay";
};
&cpu_b0 {
cpu-supply = <&vdd_cpu_b>;
};
&cpu_b1 {
cpu-supply = <&vdd_cpu_b>;
};
&cpu_l0 {
cpu-supply = <&vdd_cpu_l>;
};
&cpu_l1 {
cpu-supply = <&vdd_cpu_l>;
};
&cpu_l2 {
cpu-supply = <&vdd_cpu_l>;
};
&cpu_l3 {
cpu-supply = <&vdd_cpu_l>;
};
&edp {
force-hpd;
pinctrl-names = "default";
pinctrl-0 = <&edp_hpd>;
status = "okay";
ports {
edp_out: port@1 {
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
edp_out_panel: endpoint@0 {
reg = <0>;
remote-endpoint = <&panel_in_edp>;
};
};
};
};
&emmc_phy {
status = "okay";
};
&gpu {
mali-supply = <&vdd_gpu>;
status = "okay";
};
&hdmi_sound {
status = "okay";
};
&i2c0 {
clock-frequency = <400000>;
i2c-scl-falling-time-ns = <4>;
i2c-scl-rising-time-ns = <168>;
status = "okay";
rk808: pmic@1b {
compatible = "rockchip,rk808";
reg = <0x1b>;
#clock-cells = <1>;
clock-output-names = "xin32k", "rk808-clkout2";
interrupt-parent = <&gpio3>;
interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int_l_gpio>;
rockchip,system-power-controller;
wakeup-source;
vcc1-supply = <&vcc_sysin>;
vcc2-supply = <&vcc_sysin>;
vcc3-supply = <&vcc_sysin>;
vcc4-supply = <&vcc_sysin>;
vcc6-supply = <&vcc_sysin>;
vcc7-supply = <&vcc_sysin>;
vcc8-supply = <&vcc3v3_sys>;
vcc9-supply = <&vcc_sysin>;
vcc10-supply = <&vcc_sysin>;
vcc11-supply = <&vcc_sysin>;
vcc12-supply = <&vcc3v3_sys>;
vcc13-supply = <&vcc_sysin>;
vcc14-supply = <&vcc_sysin>;
regulators {
/* rk3399 center logic supply */
vdd_center: DCDC_REG1 {
regulator-name = "vdd_center";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_cpu_l: DCDC_REG2 {
regulator-name = "vdd_cpu_l";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_ddr: DCDC_REG3 {
regulator-name = "vcc_ddr";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcc_1v8: vcc_wl: DCDC_REG4 {
regulator-name = "vcc_1v8";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
/* not used */
LDO_REG1 {
};
/* not used */
LDO_REG2 {
};
vcc1v8_pmupll: LDO_REG3 {
regulator-name = "vcc1v8_pmupll";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vcc_sdio: LDO_REG4 {
regulator-name = "vcc_sdio";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3000000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3000000>;
};
};
vcca3v0_codec: LDO_REG5 {
regulator-name = "vcca3v0_codec";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_1v5: LDO_REG6 {
regulator-name = "vcc_1v5";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1500000>;
};
};
vcca1v8_codec: LDO_REG7 {
regulator-name = "vcca1v8_codec";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_3v0: LDO_REG8 {
regulator-name = "vcc_3v0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3000000>;
};
};
vcc3v3_s3: SWITCH_REG1 {
regulator-name = "vcc3v3_s3";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc3v3_s0: SWITCH_REG2 {
regulator-name = "vcc3v3_s0";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
};
vdd_cpu_b: regulator@40 {
compatible = "silergy,syr827";
reg = <0x40>;
fcs,suspend-voltage-selector = <1>;
pinctrl-names = "default";
pinctrl-0 = <&vsel1_gpio>;
regulator-name = "vdd_cpu_b";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <712500>;
regulator-max-microvolt = <1500000>;
regulator-ramp-delay = <1000>;
vin-supply = <&vcc_1v8>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_gpu: regulator@41 {
compatible = "silergy,syr828";
reg = <0x41>;
fcs,suspend-voltage-selector = <1>;
pinctrl-names = "default";
pinctrl-0 = <&vsel2_gpio>;
regulator-name = "vdd_gpu";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <712500>;
regulator-max-microvolt = <1500000>;
regulator-ramp-delay = <1000>;
vin-supply = <&vcc_1v8>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
&i2c1 {
clock-frequency = <100000>;
i2c-scl-falling-time-ns = <4>;
i2c-scl-rising-time-ns = <168>;
status = "okay";
es8316: es8316@11 {
compatible = "everest,es8316";
reg = <0x11>;
clocks = <&cru SCLK_I2S_8CH_OUT>;
clock-names = "mclk";
#sound-dai-cells = <0>;
};
};
&i2c3 {
i2c-scl-falling-time-ns = <15>;
i2c-scl-rising-time-ns = <450>;
status = "okay";
};
&i2c4 {
i2c-scl-falling-time-ns = <20>;
i2c-scl-rising-time-ns = <600>;
status = "okay";
fusb0: fusb30x@22 {
compatible = "fcs,fusb302";
reg = <0x22>;
interrupt-parent = <&gpio1>;
interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&fusb0_int_gpio>;
vbus-supply = <&vbus_typec>;
connector {
compatible = "usb-c-connector";
data-role = "host";
label = "USB-C";
op-sink-microwatt = <1000000>;
power-role = "dual";
sink-pdos =
<PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>;
source-pdos =
<PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>;
try-power-role = "sink";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
usbc_hs: endpoint {
remote-endpoint =
<&u2phy0_typec_hs>;
};
};
port@1 {
reg = <1>;
usbc_ss: endpoint {
remote-endpoint =
<&tcphy0_typec_ss>;
};
};
port@2 {
reg = <2>;
usbc_dp: endpoint {
remote-endpoint =
<&tcphy0_typec_dp>;
};
};
};
};
};
};
&i2s1 {
pinctrl-names = "default";
pinctrl-0 = <&i2s_8ch_mclk_gpio>, <&i2s1_2ch_bus>;
rockchip,capture-channels = <8>;
rockchip,playback-channels = <8>;
status = "okay";
};
&io_domains {
audio-supply = <&vcc_3v0>;
gpio1830-supply = <&vcc_3v0>;
sdmmc-supply = <&vcc_sdio>;
status = "okay";
};
&pcie_phy {
status = "okay";
};
&pcie0 {
bus-scan-delay-ms = <1000>;
ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
max-link-speed = <2>;
num-lanes = <4>;
pinctrl-names = "default";
pinctrl-0 = <&pcie_clkreqn_cpm>;
vpcie0v9-supply = <&vcca0v9_s3>;
vpcie1v8-supply = <&vcca1v8_s3>;
vpcie3v3-supply = <&vcc3v3_ssd>;
status = "okay";
};
&pinctrl {
buttons {
pwrbtn_gpio: pwrbtn-gpio {
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
};
lidbtn_gpio: lidbtn-gpio {
rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
dc-charger {
dc_det_gpio: dc-det-gpio {
rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
es8316 {
hp_det_gpio: hp-det-gpio {
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
fusb302x {
fusb0_int_gpio: fusb0-int-gpio {
rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
i2s1 {
i2s_8ch_mclk_gpio: i2s-8ch-mclk-gpio {
rockchip,pins = <4 RK_PA0 1 &pcfg_pull_none>;
};
};
lcd-panel {
lcdvcc_en_gpio: lcdvcc-en-gpio {
rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
};
panel_en_gpio: panel-en-gpio {
rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
};
lcd_panel_reset_gpio: lcd-panel-reset-gpio {
rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
leds {
pwr_led_pin: pwr-led-pin {
rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
};
slp_led_pin: slp-led-pin {
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pmic {
pmic_int_l_gpio: pmic-int-l-gpio {
rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
};
vsel1_gpio: vsel1-gpio {
rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
};
vsel2_gpio: vsel2-gpio {
rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
sdcard {
sdmmc0_pwr_h_gpio: sdmmc0-pwr-h-gpio {
rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
sdio-pwrseq {
wifi_enable_h_gpio: wifi-enable-h-gpio {
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb-typec {
vcc5v0_typec0_en_gpio: vcc5v0-typec0-en-gpio {
rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
usb2 {
pwr_5v_gpio: pwr-5v-gpio {
rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
};
vcc5v0_host_en_gpio: vcc5v0-host-en-gpio {
rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
wireless-bluetooth {
bt_wake_gpio: bt-wake-gpio {
rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
};
bt_host_wake_gpio: bt-host-wake-gpio {
rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
};
bt_reset_gpio: bt-reset-gpio {
rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&pmu_io_domains {
pmu1830-supply = <&vcc_3v0>;
status = "okay";
};
&pwm0 {
status = "okay";
};
&pwm2 {
status = "okay";
};
&saradc {
vref-supply = <&vcca1v8_s3>;
status = "okay";
};
&sdmmc {
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
disable-wp;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
sd-uhs-sdr104;
vmmc-supply = <&vcc3v0_sd>;
vqmmc-supply = <&vcc_sdio>;
status = "okay";
};
&sdio0 {
bus-width = <4>;
cap-sd-highspeed;
cap-sdio-irq;
keep-power-in-suspend;
mmc-pwrseq = <&sdio_pwrseq>;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
sd-uhs-sdr104;
status = "okay";
};
&sdhci {
bus-width = <8>;
mmc-hs200-1_8v;
non-removable;
status = "okay";
};
&spi1 {
max-freq = <10000000>;
status = "okay";
spiflash: flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
m25p,fast-read;
spi-max-frequency = <10000000>;
};
};
&tcphy0 {
status = "okay";
};
&tcphy0_dp {
port {
tcphy0_typec_dp: endpoint {
remote-endpoint = <&usbc_dp>;
};
};
};
&tcphy0_usb3 {
port {
tcphy0_typec_ss: endpoint {
remote-endpoint = <&usbc_ss>;
};
};
};
&tcphy1 {
status = "okay";
};
&tsadc {
/* tshut mode 0:CRU 1:GPIO */
rockchip,hw-tshut-mode = <1>;
/* tshut polarity 0:LOW 1:HIGH */
rockchip,hw-tshut-polarity = <1>;
status = "okay";
};
&u2phy0 {
status = "okay";
u2phy0_otg: otg-port {
status = "okay";
};
u2phy0_host: host-port {
phy-supply = <&vcc5v0_otg>;
status = "okay";
};
port {
u2phy0_typec_hs: endpoint {
remote-endpoint = <&usbc_hs>;
};
};
};
&u2phy1 {
status = "okay";
u2phy1_otg: otg-port {
status = "okay";
};
u2phy1_host: host-port {
phy-supply = <&vcc5v0_otg>;
status = "okay";
};
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
uart-has-rtscts;
status = "okay";
bluetooth {
compatible = "brcm,bcm4345c5";
clocks = <&rk808 1>;
clock-names = "lpo";
device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
max-speed = <1500000>;
pinctrl-names = "default";
pinctrl-0 = <&bt_host_wake_gpio &bt_wake_gpio &bt_reset_gpio>;
shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
vbat-supply = <&wifi_bat>;
vddio-supply = <&vcc_wl>;
};
};
&uart2 {
status = "okay";
};
&usb_host0_ehci {
status = "okay";
};
&usb_host0_ohci {
status = "okay";
};
&usb_host1_ehci {
status = "okay";
};
&usb_host1_ohci {
status = "okay";
};
&usbdrd3_0 {
status = "okay";
};
&usbdrd_dwc3_0 {
dr_mode = "host";
status = "okay";
};
&usbdrd3_1 {
status = "okay";
};
&usbdrd_dwc3_1 {
dr_mode = "host";
status = "okay";
};
&vopb {
status = "okay";
};
&vopb_mmu {
status = "okay";
};
&vopl {
status = "okay";
};
&vopl_mmu {
status = "okay";
};
