/*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/omap.h>
#include "skeleton.dtsi"
/ {
compatible = "ti,dm814";
interrupt-parent = <&intc>;
aliases {
i2c0 = &i2c1;
i2c1 = &i2c2;
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
ethernet0 = &cpsw_emac0;
ethernet1 = &cpsw_emac1;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "arm,cortex-a8";
device_type = "cpu";
reg = <0>;
};
};
pmu {
compatible = "arm,cortex-a8-pmu";
interrupts = <3>;
};
/*
* The soc node represents the soc top level view. It is used for IPs
* that are not memory mapped in the MPU view or for the MPU itself.
*/
soc {
compatible = "ti,omap-infra";
mpu {
compatible = "ti,omap3-mpu";
ti,hwmods = "mpu";
};
};
ocp {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
ti,hwmods = "l3_main";
/*
* See TRM "Table 1-317. L4LS Instance Summary", just deduct
* 0x1000 from the 1-317 addresses to get the device address
*/
l4ls: l4ls@48000000 {
compatible = "ti,dm814-l4ls", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x48000000 0x2000000>;
i2c1: i2c@28000 {
compatible = "ti,omap4-i2c";
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c1";
reg = <0x28000 0x1000>;
interrupts = <70>;
};
elm: elm@80000 {
compatible = "ti,814-elm";
ti,hwmods = "elm";
reg = <0x80000 0x2000>;
interrupts = <4>;
};
gpio1: gpio@32000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio1";
ti,gpio-always-on;
reg = <0x32000 0x2000>;
interrupts = <96>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio2: gpio@4c000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio2";
ti,gpio-always-on;
reg = <0x4c000 0x2000>;
interrupts = <98>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
i2c2: i2c@2a000 {
compatible = "ti,omap4-i2c";
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c2";
reg = <0x2a000 0x1000>;
interrupts = <71>;
};
mcspi1: spi@30000 {
compatible = "ti,omap4-mcspi";
reg = <0x30000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <65>;
ti,spi-num-cs = <4>;
ti,hwmods = "mcspi1";
dmas = <&edma 16 &edma 17
&edma 18 &edma 19>;
dma-names = "tx0", "rx0", "tx1", "rx1";
};
timer1: timer@2e000 {
compatible = "ti,dm814-timer";
reg = <0x2e000 0x2000>;
interrupts = <67>;
ti,hwmods = "timer1";
ti,timer-alwon;
};
uart1: uart@20000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart1";
reg = <0x20000 0x2000>;
clock-frequency = <48000000>;
interrupts = <72>;
dmas = <&edma 26 &edma 27>;
dma-names = "tx", "rx";
};
uart2: uart@22000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart2";
reg = <0x22000 0x2000>;
clock-frequency = <48000000>;
interrupts = <73>;
dmas = <&edma 28 &edma 29>;
dma-names = "tx", "rx";
};
uart3: uart@24000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart3";
reg = <0x24000 0x2000>;
clock-frequency = <48000000>;
interrupts = <74>;
dmas = <&edma 30 &edma 31>;
dma-names = "tx", "rx";
};
timer2: timer@40000 {
compatible = "ti,dm814-timer";
reg = <0x40000 0x2000>;
interrupts = <68>;
ti,hwmods = "timer2";
};
timer3: timer@42000 {
compatible = "ti,dm814-timer";
reg = <0x42000 0x2000>;
interrupts = <69>;
ti,hwmods = "timer3";
};
control: control@140000 {
compatible = "ti,dm814-scm", "simple-bus";
reg = <0x140000 0x16d000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x160000 0x16d000>;
scm_conf: scm_conf@0 {
compatible = "syscon";
reg = <0x0 0x800>;
#address-cells = <1>;
#size-cells = <1>;
scm_clocks: clocks {
#address-cells = <1>;
#size-cells = <0>;
};
scm_clockdomains: clockdomains {
};
};
pincntl: pinmux@800 {
compatible = "pinctrl-single";
reg = <0x800 0xc38>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <0x300ff>;
};
};
prcm: prcm@180000 {
compatible = "ti,dm814-prcm", "simple-bus";
reg = <0x180000 0x4000>;
prcm_clocks: clocks {
#address-cells = <1>;
#size-cells = <0>;
};
prcm_clockdomains: clockdomains {
};
};
pllss: pllss@1c5000 {
compatible = "ti,dm814-pllss", "simple-bus";
reg = <0x1c5000 0x2000>;
pllss_clocks: clocks {
#address-cells = <1>;
#size-cells = <0>;
};
pllss_clockdomains: clockdomains {
};
};
wdt1: wdt@1c7000 {
compatible = "ti,omap3-wdt";
ti,hwmods = "wd_timer";
reg = <0x1c7000 0x1000>;
interrupts = <91>;
};
};
intc: interrupt-controller@48200000 {
compatible = "ti,dm814-intc";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x48200000 0x1000>;
};
edma: edma@49000000 {
compatible = "ti,edma3";
ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
reg = <0x49000000 0x10000>,
<0x44e10f90 0x40>;
interrupts = <12 13 14>;
#dma-cells = <1>;
};
/* See TRM "Table 1-318. L4HS Instance Summary" */
l4hs: l4hs@4a000000 {
compatible = "ti,dm814-l4hs", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x4a000000 0x1b4040>;
};
/* REVISIT: Move to live under l4hs once driver is fixed */
mac: ethernet@4a100000 {
compatible = "ti,cpsw";
ti,hwmods = "cpgmac0";
clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
clock-names = "fck", "cpts";
cpdma_channels = <8>;
ale_entries = <1024>;
bd_ram_size = <0x2000>;
no_bd_ram = <0>;
rx_descs = <64>;
mac_control = <0x20>;
slaves = <2>;
active_slave = <0>;
cpts_clock_mult = <0x80000000>;
cpts_clock_shift = <29>;
reg = <0x4a100000 0x800
0x4a100900 0x100>;
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&intc>;
/*
* c0_rx_thresh_pend
* c0_rx_pend
* c0_tx_pend
* c0_misc_pend
*/
interrupts = <40 41 42 43>;
ranges;
syscon = <&scm_conf>;
davinci_mdio: mdio@4a100800 {
compatible = "ti,davinci_mdio";
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "davinci_mdio";
bus_freq = <1000000>;
reg = <0x4a100800 0x100>;
};
cpsw_emac0: slave@4a100200 {
/* Filled in by U-Boot */
mac-address = [ 00 00 00 00 00 00 ];
};
cpsw_emac1: slave@4a100300 {
/* Filled in by U-Boot */
mac-address = [ 00 00 00 00 00 00 ];
};
phy_sel: cpsw-phy-sel@48140650 {
compatible = "ti,am3352-cpsw-phy-sel";
reg= <0x48140650 0x4>;
reg-names = "gmii-sel";
};
};
};
};
#include "dm814x-clocks.dtsi"
