soc imx6
loadaddr 0x10000000
ivtofs 0x400

#include "ddr3-defines.imxcfg"

/* Debug */
wm 32 0x020e0228 0x00000005
/* wm 32 0x020e0244 0x00000005 */
wm 32 0x020e05f8 0x000130b0
/* wm 32 0x020e0614 0x000130b0 */

#include "padsetup-q.imxcfg"

/* Set Read data delay 3 delay units for all bits */
wm 32 0x021b081c 0x33333333
wm 32 0x021b0820 0x33333333
wm 32 0x021b0824 0x33333333
wm 32 0x021b0828 0x33333333
wm 32 0x021b481c 0x33333333
wm 32 0x021b4820 0x33333333
wm 32 0x021b4824 0x33333333
wm 32 0x021b4828 0x33333333

/* MDMISC No addr mirror, 1 WALAT, 5 RALAT, DDR3 mode */
wm 32 0x021b0018 0x00001742
check 32 until_all_bits_clear 0x021b0018 0x00000002

/* CSCR: Configuration mode */
wm 32 0x021b001c 0x00008000
check 32 until_any_bit_set 0x021b001c 0x00004000

wm 32 0x021b000c MDCFG0_4G_533MHZ_CL7
wm 32 0x021b0010 MDCFG1_533MHZ
wm 32 0x021b0014 MDCFG2_533MHZ

/* MDRWD */
wm 32 0x021b002c 0x000026d2

wm 32 0x021b0030 MDOR_4G_533MHZ
wm 32 0x021b0008 MDOTC_533MHZ
wm 32 0x021b0004 MDPDC_533MHZ
wm 32 0x021b0040 MDASP_2GIB25

/* Dual-Plus specific configuration */
/* MMDC: MAARCR: Disable reordering */
wm 32 0x021b0400 0x14420000
/* MMDC: MPPDCMPR2: ZQ Offset setting (TODO) */
wm 32 0x021b0890 0x00400008 /* Freescale sabre-auto: 0x00400C58 */

/* NOC: DDRCONF */
/* Sabre-auto: wm 32 0x00bb0008 0x00000000 */
/* Values (Address mapping for 64bit):
 *   0 : 16 Row, 3 Bank, 10 Col interleave (11 Col for 32 bit)
 *   1 : 15 Row, 3 Bank, 11 Col interleave (12 Col for 32 bit)
 *   2 : 18 Row, 3 Bank, 8 Col interleave  (9 Col for 32 bit)
 *   3 : 17 Row, 3 Bank, 9 Col interleave  (10 Col for 32 bit)
 *   4 : 2 CS (?), 15 Row, 3 Bank, 10 Col, interleave
 * ...
 */
wm 32 0x00bb0008 0x00000000

/*
 * NOC DdrTiming:
 *
 * Par. 	Chip		VALUE		SHIFT	Reg. field
 * ----------------------------------------------------------------
 * ActToAct	533MHz		0x1b (28)	0	0x0000001b
 * RdToMiss	533MHz		0x10 (16)	6	0x00000400
 * WrToMiss	*		0x1e (30)	12	0x0001e000
 * BurstLen	*		0x4 (8/2)	18	0x00100000
 * RdToWr	*		0x3 (3)		21	0x00600000
 * WrToRd	*		0xa (10)	26	0x28000000
 * BwRatio	* 		0x0 (0)		31	0x00000000
 * ----------------------------------------------------------------
 */
/* Sabre-auto: wm 32 0x00bb000c				0x2891E41A */
wm 32 0x00bb000c 					0x2871e41c

/*
 * NOC Activate:
 *
 * Par. 	Chip		VALUE		SHIFT	Reg. field
 * ----------------------------------------------------------------
 * Rrd		*		0x6 (6)		0	0x00000006
 * Faw		*		0x1b (27)	4	0x000001b0
 * FawBank	*		0x0 (0)		10	0x00000000
 * ----------------------------------------------------------------
 */
/* Sabre-auto: wm 32 0x00bb0038 			0x00000564 */
wm 32 0x00bb0038		 			0x000001b6

/*
 * NOC ReadLatency: (FIXME)
 */
wm 32 0x00bb0014 0x00000040

/*
 * NOC IPU1/IPU2 aging: (FIXME)
 */
wm 32 0x00bb0028 0x00000020
wm 32 0x00bb002c 0x00000020

wm 32 0x021b0000 MDCTL_4G
// check 32 until_any_bit_set 0x021b0018 0x80000000

/* DDR3 MR config */
wm 32 0x021b001c DDR3_MR2_533MHZ_RTT_120

/*
 * DDR3 chip MR3, n = 3, vvvv = 0 (no configurable function of interest).
 */
wm 32 0x021b001c 0x00008033

wm 32 0x021b001c DDR3_MR1_RTT_120_ODS_40
wm 32 0x021b001c DDR3_MR0_533MHZ_CL7

/*
 * ZQ calibration, n = 0x10 (Precharge all):
 * Bit 10 = 1:  Start ZQ calibration
 * REGISTER: 0x04008040
 */
wm 32 0x021b001c 0x04008040

/* MPZQHWCTRL */
wm 32 0x021b0800 0xa1390003 /* ZQ mode = 3  force calibration */
wm 32 0x021b4800 0xa1390003 

wm 32 0x021b0020 MDREF_64KHZ

wm 32 0x021b0818 MPODTCTRL_ODT_60
wm 32 0x021b4818 MPODTCTRL_ODT_60

wm 32 0x021b083c MPDGCTRL0_CH0_533MHZ
wm 32 0x021b483c MPDGCTRL0_CH1_533MHZ

wm 32 0x021b0840 MPDGCTRL1_CH0_533MHZ
wm 32 0x021b4840 MPDGCTRL1_CH1_533MHZ

/* MPRDDLCTL, MPWRDLCTL */
wm 32 0x021b0848 0x40404040 /* TODO. Read delay line conf. */
wm 32 0x021b4848 0x40404040 /* For now set all to 50%. */
wm 32 0x021b0850 0x40404040
wm 32 0x021b4850 0x40404040

/* MPWLDECTRL0,1 */
wm 32 0x021b080c 0x001f001f /* TODO. Write level delay control */
wm 32 0x021b0810 0x001f001f
wm 32 0x021b480c 0x001f001f
wm 32 0x021b4810 0x001f001f

/* MPMUR0 */
wm 32 0x021b08b8 0x00000800 /* Force measurement on delay lines */
wm 32 0x021b48b8 0x00000800

/* MDSCR */
wm 32 0x021b001c 0x00000000 /* Disable configuration req */

/* MAPSR */
wm 32 0x021b0404 0x00001006 /* Enable autorefresh  */

/* enable AXI cache for VDOA/PCIe/VPU/IPU */
wm 32 0x020e0010 0xff0000cf
/* set IPU AXI-id0 Qos=0xf(bypass AXI-id1 Qos=0x7) */
wm 32 0x020e0018 0x007f007f
wm 32 0x020e001c 0x007f007f

/* DEBUG leds */
wm 32 0x020e0244 0x00000005
wm 32 0x020e0614 0x000130b0

/* RGMII config */
wm 32 0x020e0790 0x00080000 /* 1V2 DDR IO */
wm 32 0x020e07ac 0x00000200 /* 60 Ohm ODT */