/*
* arch/ppc/kernel/pci_auto.c
*
* PCI autoconfiguration library
*
* Author: Matt Porter <mporter@mvista.com>
*
* Copyright 2000 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <common.h>
#ifdef CONFIG_PCI
#include <pci.h>
#undef DEBUG
#ifdef DEBUG
#define DEBUGF(x...) printf(x)
#else
#define DEBUGF(x...)
#endif /* DEBUG */
#define PCIAUTO_IDE_MODE_MASK 0x05
/*
*
*/
void pciauto_region_init(struct pci_region* res)
{
res->bus_lower = res->bus_start;
}
void pciauto_region_align(struct pci_region *res, unsigned long size)
{
res->bus_lower = ((res->bus_lower - 1) | (size - 1)) + 1;
}
int pciauto_region_allocate(struct pci_region* res, unsigned int size, unsigned int *bar)
{
unsigned long addr;
if (!res) {
DEBUGF("No resource");
goto error;
}
addr = ((res->bus_lower - 1) | (size - 1)) + 1;
if (addr - res->bus_start + size > res->size) {
DEBUGF("No room in resource");
goto error;
}
res->bus_lower = addr + size;
DEBUGF("address=0x%lx", addr);
*bar = addr;
return 0;
error:
*bar = 0xffffffff;
return -1;
}
/*
*
*/
void pciauto_setup_device(struct pci_controller *hose,
pci_dev_t dev, int bars_num,
struct pci_region *mem,
struct pci_region *prefetch,
struct pci_region *io)
{
unsigned int bar_value, bar_response, bar_size;
unsigned int cmdstat = 0;
struct pci_region *bar_res;
int bar, bar_nr = 0;
int found_mem64 = 0;
pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &cmdstat);
cmdstat = (cmdstat & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) | PCI_COMMAND_MASTER;
for (bar = PCI_BASE_ADDRESS_0; bar <= PCI_BASE_ADDRESS_0 + (bars_num*4); bar += 4) {
/* Tickle the BAR and get the response */
pci_hose_write_config_dword(hose, dev, bar, 0xffffffff);
pci_hose_read_config_dword(hose, dev, bar, &bar_response);
/* If BAR is not implemented go to the next BAR */
if (!bar_response)
continue;
found_mem64 = 0;
/* Check the BAR type and set our address mask */
if (bar_response & PCI_BASE_ADDRESS_SPACE) {
bar_size = ((~(bar_response & PCI_BASE_ADDRESS_IO_MASK))
& 0xffff) + 1;
bar_res = io;
DEBUGF("PCI Autoconfig: BAR %d, I/O, size=0x%x, ", bar_nr, bar_size);
} else {
if ( (bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
PCI_BASE_ADDRESS_MEM_TYPE_64)
found_mem64 = 1;
bar_size = ~(bar_response & PCI_BASE_ADDRESS_MEM_MASK) + 1;
if (prefetch && (bar_response & PCI_BASE_ADDRESS_MEM_PREFETCH))
bar_res = prefetch;
else
bar_res = mem;
DEBUGF("PCI Autoconfig: BAR %d, Mem, size=0x%x, ", bar_nr, bar_size);
}
if (pciauto_region_allocate(bar_res, bar_size, &bar_value) == 0) {
/* Write it out and update our limit */
pci_hose_write_config_dword(hose, dev, bar, bar_value);
/*
* If we are a 64-bit decoder then increment to the
* upper 32 bits of the bar and force it to locate
* in the lower 4GB of memory.
*/
if (found_mem64) {
bar += 4;
pci_hose_write_config_dword(hose, dev, bar, 0x00000000);
}
cmdstat |= (bar_response & PCI_BASE_ADDRESS_SPACE) ?
PCI_COMMAND_IO : PCI_COMMAND_MEMORY;
}
DEBUGF("\n");
bar_nr++;
}
pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat);
pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
}
static void pciauto_prescan_setup_bridge(struct pci_controller *hose,
pci_dev_t dev, int sub_bus)
{
struct pci_region *pci_mem = hose->pci_mem;
struct pci_region *pci_prefetch = hose->pci_prefetch;
struct pci_region *pci_io = hose->pci_io;
unsigned int cmdstat;
pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &cmdstat);
/* Configure bus number registers */
pci_hose_write_config_byte(hose, dev, PCI_PRIMARY_BUS, PCI_BUS(dev));
pci_hose_write_config_byte(hose, dev, PCI_SECONDARY_BUS, sub_bus);
pci_hose_write_config_byte(hose, dev, PCI_SUBORDINATE_BUS, 0xff);
if (pci_mem) {
/* Round memory allocator to 1MB boundary */
pciauto_region_align(pci_mem, 0x100000);
/* Set up memory and I/O filter limits, assume 32-bit I/O space */
pci_hose_write_config_word(hose, dev, PCI_MEMORY_BASE,
(pci_mem->bus_lower & 0xfff00000) >> 16);
cmdstat |= PCI_COMMAND_MEMORY;
}
if (pci_prefetch) {
/* Round memory allocator to 1MB boundary */
pciauto_region_align(pci_prefetch, 0x100000);
/* Set up memory and I/O filter limits, assume 32-bit I/O space */
pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_BASE,
(pci_prefetch->bus_lower & 0xfff00000) >> 16);
cmdstat |= PCI_COMMAND_MEMORY;
} else {
/* We don't support prefetchable memory for now, so disable */
pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_BASE, 0x1000);
pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_LIMIT, 0x0);
}
if (pci_io) {
/* Round I/O allocator to 4KB boundary */
pciauto_region_align(pci_io, 0x1000);
pci_hose_write_config_byte(hose, dev, PCI_IO_BASE,
(pci_io->bus_lower & 0x0000f000) >> 8);
pci_hose_write_config_word(hose, dev, PCI_IO_BASE_UPPER16,
(pci_io->bus_lower & 0xffff0000) >> 16);
cmdstat |= PCI_COMMAND_IO;
}
/* Enable memory and I/O accesses, enable bus master */
pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat | PCI_COMMAND_MASTER);
}
static void pciauto_postscan_setup_bridge(struct pci_controller *hose,
pci_dev_t dev, int sub_bus)
{
struct pci_region *pci_mem = hose->pci_mem;
struct pci_region *pci_prefetch = hose->pci_prefetch;
struct pci_region *pci_io = hose->pci_io;
/* Configure bus number registers */
pci_hose_write_config_byte(hose, dev, PCI_SUBORDINATE_BUS, sub_bus);
if (pci_mem) {
/* Round memory allocator to 1MB boundary */
pciauto_region_align(pci_mem, 0x100000);
pci_hose_write_config_word(hose, dev, PCI_MEMORY_LIMIT,
(pci_mem->bus_lower-1) >> 16);
}
if (pci_prefetch) {
/* Round memory allocator to 1MB boundary */
pciauto_region_align(pci_prefetch, 0x100000);
pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_LIMIT,
(pci_prefetch->bus_lower-1) >> 16);
}
if (pci_io) {
/* Round I/O allocator to 4KB boundary */
pciauto_region_align(pci_io, 0x1000);
pci_hose_write_config_byte(hose, dev, PCI_IO_LIMIT,
((pci_io->bus_lower-1) & 0x0000f000) >> 8);
pci_hose_write_config_word(hose, dev, PCI_IO_LIMIT_UPPER16,
((pci_io->bus_lower-1) & 0xffff0000) >> 16);
}
}
/*
*
*/
void pciauto_config_init(struct pci_controller *hose)
{
int i;
hose->pci_io = hose->pci_mem = NULL;
for (i=0; i<hose->region_count; i++) {
switch(hose->regions[i].flags) {
case PCI_REGION_IO:
if (!hose->pci_io ||
hose->pci_io->size < hose->regions[i].size)
hose->pci_io = hose->regions + i;
break;
case PCI_REGION_MEM:
if (!hose->pci_mem ||
hose->pci_mem->size < hose->regions[i].size)
hose->pci_mem = hose->regions + i;
break;
case (PCI_REGION_MEM | PCI_REGION_PREFETCH):
if (!hose->pci_prefetch ||
hose->pci_prefetch->size < hose->regions[i].size)
hose->pci_prefetch = hose->regions + i;
break;
}
}
if (hose->pci_mem) {
pciauto_region_init(hose->pci_mem);
DEBUGF("PCI Autoconfig: Memory region: [%lx-%lx]\n",
hose->pci_mem->bus_start,
hose->pci_mem->bus_start + hose->pci_mem->size - 1);
}
if (hose->pci_prefetch) {
pciauto_region_init(hose->pci_prefetch);
DEBUGF("PCI Autoconfig: Prefetchable Memory region: [%lx-%lx]\n",
hose->pci_prefetch->bus_start,
hose->pci_prefetch->bus_start + hose->pci_prefetch->size - 1);
}
if (hose->pci_io) {
pciauto_region_init(hose->pci_io);
DEBUGF("PCI Autoconfig: I/O region: [%lx-%lx]\n",
hose->pci_io->bus_start,
hose->pci_io->bus_start + hose->pci_io->size - 1);
}
}
/* HJF: Changed this to return int. I think this is required
* to get the correct result when scanning bridges
*/
int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev)
{
unsigned int sub_bus = PCI_BUS(dev);
unsigned short class;
unsigned char prg_iface;
int n;
pci_hose_read_config_word(hose, dev, PCI_CLASS_DEVICE, &class);
switch(class) {
case PCI_CLASS_BRIDGE_PCI:
hose->current_busno++;
pciauto_setup_device(hose, dev, 2, hose->pci_mem, hose->pci_prefetch, hose->pci_io);
DEBUGF("PCI Autoconfig: Found P2P bridge, device %d\n", PCI_DEV(dev));
/* Passing in current_busno allows for sibling P2P bridges */
pciauto_prescan_setup_bridge(hose, dev, hose->current_busno);
/*
* need to figure out if this is a subordinate bridge on the bus
* to be able to properly set the pri/sec/sub bridge registers.
*/
n = pci_hose_scan_bus(hose, hose->current_busno);
/* figure out the deepest we've gone for this leg */
sub_bus = max(n, sub_bus);
pciauto_postscan_setup_bridge(hose, dev, sub_bus);
sub_bus = hose->current_busno;
break;
case PCI_CLASS_STORAGE_IDE:
pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &prg_iface);
if (!(prg_iface & PCIAUTO_IDE_MODE_MASK)) {
DEBUGF("PCI Autoconfig: Skipping legacy mode IDE controller\n");
return sub_bus;
}
pciauto_setup_device(hose, dev, 6, hose->pci_mem, hose->pci_prefetch, hose->pci_io);
break;
case PCI_CLASS_BRIDGE_CARDBUS:
/* just do a minimal setup of the bridge, let the OS take care of the rest */
pciauto_setup_device(hose, dev, 0, hose->pci_mem, hose->pci_prefetch, hose->pci_io);
DEBUGF("PCI Autoconfig: Found P2CardBus bridge, device %d\n", PCI_DEV(dev));
hose->current_busno++;
break;
#ifdef CONFIG_MPC5200
case PCI_CLASS_BRIDGE_OTHER:
DEBUGF("PCI Autoconfig: Skipping bridge device %d\n",
PCI_DEV(dev));
break;
#endif
#ifdef CONFIG_MPC834X
case PCI_CLASS_BRIDGE_OTHER:
/*
* The host/PCI bridge 1 seems broken in 8349 - it presents
* itself as 'PCI_CLASS_BRIDGE_OTHER' and appears as an _agent_
* device claiming resources io/mem/irq.. we only allow for
* the PIMMR window to be allocated (BAR0 - 1MB size)
*/
DEBUGF("PCI Autoconfig: Broken bridge found, only minimal config\n");
pciauto_setup_device(hose, dev, 0, hose->pci_mem, hose->pci_prefetch, hose->pci_io);
break;
#endif
default:
pciauto_setup_device(hose, dev, 6, hose->pci_mem, hose->pci_prefetch, hose->pci_io);
break;
}
return sub_bus;
}
#endif /* CONFIG_PCI */
