#ifndef _IMX21_REGS_H #define _IMX21_REGS_H #ifndef _IMX_REGS_H #error "Please do not include directly" #endif #define IMX_IO_BASE 0x10000000 #define IMX_AIPI1_BASE (0x00000 + IMX_IO_BASE) #define IMX_WDT_BASE (0x02000 + IMX_IO_BASE) #define IMX_TIM1_BASE (0x03000 + IMX_IO_BASE) #define IMX_TIM2_BASE (0x04000 + IMX_IO_BASE) #define IMX_TIM3_BASE (0x05000 + IMX_IO_BASE) #define IMX_UART1_BASE (0x0a000 + IMX_IO_BASE) #define IMX_UART2_BASE (0x0b000 + IMX_IO_BASE) #define IMX_UART3_BASE (0x0c000 + IMX_IO_BASE) #define IMX_UART4_BASE (0x0d000 + IMX_IO_BASE) #define IMX_GPIO_BASE (0x15000 + IMX_IO_BASE) #define IMX_AIPI2_BASE (0x20000 + IMX_IO_BASE) #define IMX_PLL_BASE (0x27000 + IMX_IO_BASE) #define IMX_SYSTEM_CTL_BASE (0x27800 + IMX_IO_BASE) #define IMX_SDRAM_BASE (0xdf000000) #define IMX_EIM_BASE (0xdf001000) #define IMX_NFC_BASE (0xdf003000) /* AIPI */ #define AIPI1_PSR0 __REG(IMX_AIPI1_BASE + 0x00) #define AIPI1_PSR1 __REG(IMX_AIPI1_BASE + 0x04) #define AIPI2_PSR0 __REG(IMX_AIPI2_BASE + 0x00) #define AIPI2_PSR1 __REG(IMX_AIPI2_BASE + 0x04) /* System Control */ #define SUID0 __REG(IMX_SYSTEM_CTL_BASE + 0x4) /* Silicon ID Register (12 bytes) */ #define SUID1 __REG(IMX_SYSTEM_CTL_BASE + 0x8) /* Silicon ID Register (12 bytes) */ #define CID __REG(IMX_SYSTEM_CTL_BASE + 0xC) /* Silicon ID Register (12 bytes) */ #define FMCR __REG(IMX_SYSTEM_CTL_BASE + 0x14) /* Function Multeplexing Control Register */ #define GPCR __REG(IMX_SYSTEM_CTL_BASE + 0x18) /* Global Peripheral Control Register */ #define WBCR __REG(IMX_SYSTEM_CTL_BASE + 0x1C) /* Well Bias Control Register */ #define DSCR(x) __REG(IMX_SYSTEM_CTL_BASE + 0x1C + ((x) << 2)) /* Driving Strength Control Register 1 - 13 */ #define GPCR_BOOT_SHIFT 16 #define GPCR_BOOT_MASK (0xf << GPCR_BOOT_SHIFT) #define GPCR_BOOT_UART_USB 0 #define GPCR_BOOT_8BIT_NAND_2k 2 #define GPCR_BOOT_16BIT_NAND_2k 3 #define GPCR_BOOT_16BIT_NAND_512 4 #define GPCR_BOOT_16BIT_CS0 5 #define GPCR_BOOT_32BIT_CS0 6 #define GPCR_BOOT_8BIT_NAND_512 7 /* SDRAM Controller registers bitfields */ #define SDCTL0 __REG(IMX_SDRAM_BASE + 0x00) /* SDRAM 0 Control Register */ #define SDCTL1 __REG(IMX_SDRAM_BASE + 0x04) /* SDRAM 0 Control Register */ #define SDRST __REG(IMX_SDRAM_BASE + 0x18) /* SDRAM Reset Register */ #define SDMISC __REG(IMX_SDRAM_BASE + 0x14) /* SDRAM Miscellaneous Register */ /* Chip Select Registers */ #define CS0U __REG(IMX_EIM_BASE + 0x00) /* Chip Select 0 Upper Register */ #define CS0L __REG(IMX_EIM_BASE + 0x04) /* Chip Select 0 Lower Register */ #define CS1U __REG(IMX_EIM_BASE + 0x08) /* Chip Select 1 Upper Register */ #define CS1L __REG(IMX_EIM_BASE + 0x0C) /* Chip Select 1 Lower Register */ #define CS2U __REG(IMX_EIM_BASE + 0x10) /* Chip Select 2 Upper Register */ #define CS2L __REG(IMX_EIM_BASE + 0x14) /* Chip Select 2 Lower Register */ #define CS3U __REG(IMX_EIM_BASE + 0x18) /* Chip Select 3 Upper Register */ #define CS3L __REG(IMX_EIM_BASE + 0x1C) /* Chip Select 3 Lower Register */ #define CS4U __REG(IMX_EIM_BASE + 0x20) /* Chip Select 4 Upper Register */ #define CS4L __REG(IMX_EIM_BASE + 0x24) /* Chip Select 4 Lower Register */ #define CS5U __REG(IMX_EIM_BASE + 0x28) /* Chip Select 5 Upper Register */ #define CS5L __REG(IMX_EIM_BASE + 0x2C) /* Chip Select 5 Lower Register */ #define EIM __REG(IMX_EIM_BASE + 0x30) /* EIM Configuration Register */ /* Watchdog Registers*/ #define WCR __REG16(IMX_WDT_BASE + 0x00) /* Watchdog Control Register */ #define WSR __REG16(IMX_WDT_BASE + 0x02) /* Watchdog Service Register */ #define WRSR __REG16(IMX_WDT_BASE + 0x04) /* Watchdog Reset Status Register */ /* important definition of some bits of WCR */ #define WCR_WDE 0x04 /* PLL registers */ #define CSCR __REG(IMX_PLL_BASE + 0x00) /* Clock Source Control Register */ #define MPCTL0 __REG(IMX_PLL_BASE + 0x04) /* MCU PLL Control Register 0 */ #define MPCTL1 __REG(IMX_PLL_BASE + 0x08) /* MCU PLL Control Register 1 */ #define SPCTL0 __REG(IMX_PLL_BASE + 0x0c) /* System PLL Control Register 0 */ #define SPCTL1 __REG(IMX_PLL_BASE + 0x10) /* System PLL Control Register 1 */ #define OSC26MCTL __REG(IMX_PLL_BASE + 0x14) /* Oscillator 26M Register */ #define PCDR0 __REG(IMX_PLL_BASE + 0x18) /* Peripheral Clock Divider Register 0 */ #define PCDR1 __REG(IMX_PLL_BASE + 0x1c) /* Peripheral Clock Divider Register 1 */ #define PCCR0 __REG(IMX_PLL_BASE + 0x20) /* Peripheral Clock Control Register 0 */ #define PCCR1 __REG(IMX_PLL_BASE + 0x24) /* Peripheral Clock Control Register 1 */ #define CCSR __REG(IMX_PLL_BASE + 0x28) /* Clock Control Status Register */ #define CSCR_MPEN (1 << 0) #define CSCR_SPEN (1 << 1) #define CSCR_FPM_EN (1 << 2) #define CSCR_OSC26M_DIS (1 << 3) #define CSCR_OSC26M_DIV1P5 (1 << 4) #define CSCR_MCU_SEL (1 << 16) #define CSCR_SP_SEL (1 << 17) #define CSCR_SD_CNT(d) (((d) & 0x3) << 24) #define CSCR_USB_DIV(d) (((d) & 0x7) << 26) #define CSCR_PRESC(d) (((d) & 0x7) << 29) #define MPCTL1_BRMO (1 << 6) #define MPCTL1_LF (1 << 15) #define PCCR0_PERCLK3_EN (1 << 18) #define PCCR0_NFC_EN (1 << 19) #define PCCR0_HCLK_LCDC_EN (1 << 26) #define PCCR1_GPT1_EN (1 << 25) #define CCSR_32K_SR (1 << 15) #define PA5_PF_LSCLK (GPIO_PORTA | GPIO_PF | GPIO_OUT | 5) #define PA6_PF_LD0 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 6) #define PA7_PF_LD1 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 7) #define PA8_PF_LD2 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 8) #define PA9_PF_LD3 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 9) #define PA10_PF_LD4 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 10) #define PA11_PF_LD5 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 11) #define PA12_PF_LD6 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 12) #define PA13_PF_LD7 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 13) #define PA14_PF_LD8 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 14) #define PA15_PF_LD9 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 15) #define PA16_PF_LD10 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 16) #define PA17_PF_LD11 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 17) #define PA18_PF_LD12 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 18) #define PA19_PF_LD13 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 19) #define PA20_PF_LD14 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 20) #define PA21_PF_LD15 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 21) #define PA22_PF_LD16 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 22) #define PA23_PF_LD17 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 23) #define PA24_PF_REV (GPIO_PORTA | GPIO_PF | GPIO_OUT | 24) #define PA25_PF_CLS (GPIO_PORTA | GPIO_PF | GPIO_OUT | 25) #define PA26_PF_PS (GPIO_PORTA | GPIO_PF | GPIO_OUT | 26) #define PA27_PF_SPL_SPR (GPIO_PORTA | GPIO_PF | GPIO_OUT | 27) #define PA28_PF_HSYNC (GPIO_PORTA | GPIO_PF | GPIO_OUT | 28) #define PA29_PF_VSYNC (GPIO_PORTA | GPIO_PF | GPIO_OUT | 29) #define PA30_PF_CONTRAST (GPIO_PORTA | GPIO_PF | GPIO_OUT | 30) #define PA31_PF_OE_ACD (GPIO_PORTA | GPIO_PF | GPIO_OUT | 31) #define PE12_PF_UART1_TXD (GPIO_PORTE | GPIO_OUT | GPIO_PF | 12) #define PE13_PF_UART1_RXD (GPIO_PORTE | GPIO_IN | GPIO_PF | 13) #define PE14_PF_UART1_CTS (GPIO_PORTE | GPIO_OUT | GPIO_PF | 14) #define PE15_PF_UART1_RTS (GPIO_PORTE | GPIO_IN | GPIO_PF | 15) /* * Definitions for the clocksource driver */ /* Part 1: Registers */ # define GPT_TCTL 0x00 # define GPT_TPRER 0x04 # define GPT_TCMP 0x08 # define GPT_TCR 0x0c # define GPT_TCN 0x10 # define GPT_TSTAT 0x14 /* Part 2: Bitfields */ #define TCTL_SWR (1<<15) /* Software reset */ #define TCTL_CC (1<<10) /* counter clear */ #define TCTL_FRR (1<<8) /* Freerun / restart */ #define TCTL_CAP (3<<6) /* Capture Edge */ #define TCTL_CAPEN (1<<5) /* compare interrupt enable */ #define TCTL_COMPEN (1<<4) /* compare interrupt enable */ #define TCTL_CLKSOURCE (1) /* Clock source bit position */ #define TCTL_TEN (1) /* Timer enable */ #define TPRER_PRES (0xff) /* Prescale */ #define TSTAT_CAPT (1<<1) /* Capture event */ #define TSTAT_COMP (1) /* Compare event */ #define IMX_CS0_BASE 0xC8000000 #define IMX_CS1_BASE 0xCC000000 #define IMX_CS2_BASE 0xD0000000 #define IMX_CS3_BASE 0xD1000000 #define IMX_CS4_BASE 0xD2000000 #define IMX_CS5_BASE 0xD3000000 #endif /* _IMX21_REGS_H */