#include <common.h>
#include <console.h>
#include <init.h>
#include <driver.h>
#include <io.h>
#include <gpio.h>
#include <ns16550.h>
#include <asm/armlinux.h>
#include <generated/mach-types.h>
#include <mach/omap4-silicon.h>
#include <mach/omap4-devices.h>
#include <mach/sdrc.h>
#include <mach/sys_info.h>
#include <mach/syslib.h>
#include <mach/control.h>
#include <usb/ehci.h>
#include <linux/err.h>
#include <linux/sizes.h>
#include <asm/mmu.h>
#include <envfs.h>
#include <i2c/i2c.h>
#include <gpio.h>
#include <led.h>

static int board_revision;

#define GPIO_HUB_POWER 1
#define GPIO_HUB_NRESET_39 39
#define GPIO_HUB_NRESET_62 62
#define GPIO_BOARD_ID0 182
#define GPIO_BOARD_ID1 101
#define GPIO_BOARD_ID2 171

static int panda_console_init(void)
{
	barebox_set_model("Texas Instruments panda");
	barebox_set_hostname("panda");

	omap44xx_add_uart3();

	return 0;
}
console_initcall(panda_console_init);

static int panda_mem_init(void)
{
	omap_add_ram0(SZ_1G);

	return 0;
}
mem_initcall(panda_mem_init);

#ifdef CONFIG_USB_EHCI
static struct ehci_platform_data ehci_pdata = {
	.flags = 0,
};

static void panda_ehci_init(void)
{
	u32 val;
	int hub_nreset;

	if (board_revision)
		hub_nreset = GPIO_HUB_NRESET_62;
	else
		hub_nreset = GPIO_HUB_NRESET_39;

	/* disable the power to the usb hub prior to init */
	gpio_direction_output(GPIO_HUB_POWER, 0);
	gpio_set_value(GPIO_HUB_POWER, 0);

	/* reset phy+hub */
	gpio_direction_output(hub_nreset, 0);
	gpio_set_value(hub_nreset, 0);
	gpio_set_value(hub_nreset, 1);
	val = readl(0x4a009358);
	val |= (1 << 24);
	val |= 0x2;
	writel(val, 0x4a009358);
	writel(0x7, 0x4a008180);
	mdelay(10);

	writel(0x00000014, 0x4a064010);
	writel(0x8000001c, 0x4a064040);

	/* enable power to hub */
	gpio_set_value(GPIO_HUB_POWER, 1);

	omap44xx_add_ehci(&ehci_pdata);
}
#else
static void panda_ehci_init(void)
{}
#endif

static void __init panda_boardrev_init(void)
{
	board_revision = gpio_get_value(GPIO_BOARD_ID0);
	board_revision |= (gpio_get_value(GPIO_BOARD_ID1)<<1);
	board_revision |= (gpio_get_value(GPIO_BOARD_ID2)<<2);

	pr_info("PandaBoard Revision: %03d\n", board_revision);
}

static struct i2c_board_info i2c_devices[] = {
	{
		I2C_BOARD_INFO("twl6030", 0x48),
	},
};

struct gpio_led panda_leds[] = {
	{
		.gpio = 7,
		.led = {
			.name = "heartbeat",
		},
	},
};

static void panda_led_init(void)
{
	led_gpio_register(&panda_leds[0]);
	led_set_trigger(LED_TRIGGER_HEARTBEAT, &panda_leds[0].led);
}

static int panda_devices_init(void)
{
	panda_boardrev_init();

	if (gpio_get_value(182)) {
		/* enable software ioreq */
		sr32(OMAP44XX_SCRM_AUXCLK3, 8, 1, 0x1);
		/* set for sys_clk (38.4MHz) */
		sr32(OMAP44XX_SCRM_AUXCLK3, 1, 2, 0x0);
		/* set divisor to 2 */
		sr32(OMAP44XX_SCRM_AUXCLK3, 16, 4, 0x1);
		/* set the clock source to active */
		sr32(OMAP44XX_SCRM_ALTCLKSRC, 0, 1, 0x1);
		/* enable clocks */
		sr32(OMAP44XX_SCRM_ALTCLKSRC, 2, 2, 0x3);
	} else {
		/* enable software ioreq */
		sr32(OMAP44XX_SCRM_AUXCLK1, 8, 1, 0x1);
		/* set for PER_DPLL */
		sr32(OMAP44XX_SCRM_AUXCLK1, 1, 2, 0x2);
		/* set divisor to 16 */
		sr32(OMAP44XX_SCRM_AUXCLK1, 16, 4, 0xf);
		/* set the clock source to active */
		sr32(OMAP44XX_SCRM_ALTCLKSRC, 0, 1, 0x1);
		/* enable clocks */
		sr32(OMAP44XX_SCRM_ALTCLKSRC, 2, 2, 0x3);
	}

	i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));
	omap44xx_add_i2c1(NULL);
	omap44xx_add_mmc1(NULL);

	panda_ehci_init();

	panda_led_init();
	armlinux_set_architecture(MACH_TYPE_OMAP4_PANDA);

	return 0;
}
device_initcall(panda_devices_init);