mii-tool: make the 'No MII transceiver present!' message more clear
Suppose you have two network controllers. The first one is ENC28J60 (it is in low power mode after start) the second one is always-enabled eth1. As ENC28J60 is in low power mode before enc28j60_eth_open() is called. ENC28J60's mii traceiver is in low power mode too so the mii traceiver's register are inaccessable. Here is a sample log just after barebox start: barebox:/ miitool miibus0: registered phy as /dev/phy0 No MII transceiver present!. miibus1: registered phy as /dev/phy1 phy1: eth1: negotiated 100baseTx-FD, link ok barebox:/ miitool No MII transceiver present!. phy1: eth1: negotiated 100baseTx-FD, link ok The 'No MII transceiver present!.' message is confusing here. This patch fixes the problem so the miitool output looks like this: barebox:/ miitool phy0: spieth0: No MII transceiver present!. phy1: eth1: negotiated 100baseTx-FD, link ok Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
WIP_next-LS
master
next
stable/v2014.08
stable/v2014.09
stable/v2014.10
stable/v2014.11
stable/v2014.12
stable/v2015.01
stable/v2015.02
stable/v2017.05
stable/v2017.06
stable/v2017.07
stable/v2017.11
stable/v2018.07
stable/v2018.09
stable/v2018.12
work/fit-support
v2020.07.0
v2020.06.0
v2020.05.0
v2020.04.0
v2020.03.0
v2020.02.0
v2020.01.0
v2019.12.0
v2019.11.0
v2019.10.0
v2019.09.0
v2019.08.1
v2019.08.0
v2019.07.0
v2019.06.1
v2019.06.0
v2019.05.0
v2019.04.0
v2019.03.0
v2019.02.0
v2019.01.0
v2018.12.0
v2018.11.0
v2018.10.0
v2018.09.1
v2018.09.0
v2018.08.1
v2018.08.0
v2018.07.2
v2018.07.1
v2018.07.0
v2018.06.0
v2018.05.0
v2018.04.0
v2018.03.0
v2018.02.0
v2018.01.0
v2017.12.0
v2017.11.0
v2017.10.0
v2017.09.0
v2017.08.0
v2017.07.1
v2017.07.0
v2017.06.2
v2017.06.1
v2017.06.0
v2017.05.4
v2017.05.3
v2017.05.2
v2017.05.1
v2017.05.0
v2017.04.0
v2017.03.0
v2017.02.0
v2017.01.0
v2016.11.0
v2016.10.0
v2016.09.0
v2016.08.0
v2016.07.0
v2016.06.0
v2016.05.0
v2016.04.0
v2016.03.0
v2016.02.0
v2016.01.0
v2015.12.0
v2015.11.0
v2015.10.0
v2015.09.0
v2015.08.0
v2015.07.0
v2015.06.0
v2015.05.0
v2015.04.0
v2015.03.0
v2015.02.0
v2015.01.0
v2014.12.0
v2014.11.0
v2014.10.0
v2014.09.0
v2014.08.0
|
---|
|
commands/miitool.c |
---|