GitBucket
|
ARM: Layerscape: Add TQ TQMLS1046a board support
This adds support for the TQ TQMLS1046a board. Currently supported: - UART - SD/MMC - Network on eth3, eth2 currently not working for unknown reasons First stage support exists but is currently untested. Serdes ports are not yet supported. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> |
|---|
|
|
| arch/arm/boards/Makefile |
|---|
| arch/arm/boards/tqmls1046a/Makefile 0 → 100644 |
|---|
| arch/arm/boards/tqmls1046a/board.c 0 → 100644 |
|---|
| arch/arm/boards/tqmls1046a/defaultenv-tqmls1046a/nv/dev.eth4.mode 0 → 100644 |
|---|
| arch/arm/boards/tqmls1046a/defaultenv-tqmls1046a/nv/dev.eth5.mode 0 → 100644 |
|---|
| arch/arm/boards/tqmls1046a/defaultenv-tqmls1046a/nv/dev.eth6.mode 0 → 100644 |
|---|
| arch/arm/boards/tqmls1046a/defaultenv-tqmls1046a/nv/dev.eth7.mode 0 → 100644 |
|---|
| arch/arm/boards/tqmls1046a/lowlevel.c 0 → 100644 |
|---|
| arch/arm/boards/tqmls1046a/start.S 0 → 100644 |
|---|
| arch/arm/boards/tqmls1046a/tqmls1046a_pbi_qspi.cfg 0 → 100644 |
|---|
| arch/arm/boards/tqmls1046a/tqmls1046a_pbi_sd.cfg 0 → 100644 |
|---|
| arch/arm/boards/tqmls1046a/tqmls1046a_rcw_emmc_3333_5559.cfg 0 → 100644 |
|---|
| arch/arm/boards/tqmls1046a/tqmls1046a_rcw_qspi_3333_5559.cfg 0 → 100644 |
|---|
| arch/arm/boards/tqmls1046a/tqmls1046a_rcw_sd_3333_5559.cfg 0 → 100644 |
|---|
| arch/arm/dts/Makefile |
|---|
| arch/arm/dts/fsl-tqmls1046a-mbls10xxa.dts 0 → 100644 |
|---|
| arch/arm/dts/fsl-tqmls1046a.dtsi 0 → 100644 |
|---|
| arch/arm/mach-layerscape/Kconfig |
|---|
| images/Makefile.layerscape |
|---|