i.MX: clk-pllv3: Initially disable PLL_BYPASS bit
Commit cbff8031b491 ("i.MX: clk-pllv3: Do not touch PLL_BYPASS bit") overreached a bit by removing the code that disables the PLL_BYPASS bit for all architectures instead of making an exception for Vybrid and i.MX6SL. This causes the USB controller on i.MX6Q to run at bypass frequency and fail: barebox@Boundary Devices i.MX6 Quad Nitrogen6x Board:/ usb usb: USB: scanning bus for devices... usb: Bus 001 Device 001: ID 0000:0000 EHCI Host Controller imx-usb 2184200.usb: port(0) reset error This patch adds code to unconditionally disable the PLL_BYPASS bit initially, when the PLL clocks are registered. Cc: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Fixes: cbff8031b491 ("i.MX: clk-pllv3: Do not touch PLL_BYPASS bit") Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
WIP_next-LS
master
next
stable/v2017.11
stable/v2018.07
stable/v2018.09
stable/v2018.12
v2020.07.0
v2020.06.0
v2020.05.0
v2020.04.0
v2020.03.0
v2020.02.0
v2020.01.0
v2019.12.0
v2019.11.0
v2019.10.0
v2019.09.0
v2019.08.1
v2019.08.0
v2019.07.0
v2019.06.1
v2019.06.0
v2019.05.0
v2019.04.0
v2019.03.0
v2019.02.0
v2019.01.0
v2018.12.0
v2018.11.0
v2018.10.0
v2018.09.1
v2018.09.0
v2018.08.1
v2018.08.0
v2018.07.2
v2018.07.1
v2018.07.0
v2018.06.0
v2018.05.0
v2018.04.0
v2018.03.0
v2018.02.0
v2018.01.0
v2017.12.0
v2017.11.0
v2017.10.0
v2017.09.0
v2017.08.0
|
---|
|
drivers/clk/imx/clk-pllv3.c |
---|