GitBucket
|
i.MX/DCD compiler and interpreter: logic is different
Reading the manual more carefully discovers a different logic for the DCD 'check' command. They use the term "until". In order to get the manual and the software in sync, this change switches to the term "until" as well. Changing must happen at compiler and interpreter level to make it work. Signed-off-by: Juergen Borleis <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
WIP_next-LS
master
next
stable/v2018.07
stable/v2018.09
stable/v2018.12
v2020.07.0
v2020.06.0
v2020.05.0
v2020.04.0
v2020.03.0
v2020.02.0
v2020.01.0
v2019.12.0
v2019.11.0
v2019.10.0
v2019.09.0
v2019.08.1
v2019.08.0
v2019.07.0
v2019.06.1
v2019.06.0
v2019.05.0
v2019.04.0
v2019.03.0
v2019.02.0
v2019.01.0
v2018.12.0
v2018.11.0
v2018.10.0
v2018.09.1
v2018.09.0
v2018.08.1
v2018.08.0
v2018.07.2
v2018.07.1
v2018.07.0
v2018.06.0
v2018.05.0
|
|---|
|
Sascha Hauer
committed
on 26 Mar 2018
|
| Documentation/boards/imx.rst |
|---|
| arch/arm/boards/element14-warp7/flash-header-mx7-warp.imxcfg |
|---|
| arch/arm/boards/freescale-mx7-sabresd/flash-header-mx7-sabresd.imxcfg |
|---|
| arch/arm/boards/freescale-vf610-twr/flash-header-vf610-twr.imxcfg |
|---|
| arch/arm/boards/karo-tx53/flash-header-tx53-revxx30.imxcfg |
|---|
| arch/arm/boards/karo-tx6x/1600mhz_4x128mx16.imxcfg |
|---|
| arch/arm/boards/karo-tx6x/flash-header-tx6dl-512m.imxcfg |
|---|
| arch/arm/boards/karo-tx6x/flash-header-tx6q-1g.imxcfg |
|---|
| arch/arm/boards/karo-tx6x/flash-header-tx6qp-2g.imxcfg |
|---|
| arch/arm/boards/kindle-mx50/flash-header-kindle-lpddr1.imxcfg |
|---|
| arch/arm/boards/kindle-mx50/flash-header-kindle-lpddr2.imxcfg |
|---|
| arch/arm/boards/phytec-phycore-imx7/flash-header-phytec-phycore-imx7.imxcfg |
|---|
| arch/arm/boards/zii-vf610-dev/flash-header-zii-vf610-dev.imxcfg |
|---|
| scripts/imx/README |
|---|
| scripts/imx/imx-usb-loader.c |
|---|
| scripts/imx/imx.c |
|---|
| scripts/imx/imx.h |
|---|