LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / commands / Kconfig

2014-08-07	038be0f Browse files » Merge branch 'for-next/usb' Sascha Hauer committed on 7 Aug 2014
	9cce006 Browse files » Merge branch 'for-next/rtc' ... Conflicts: arch/mips/dts/jz4755.dtsi commands/Makefile Sascha Hauer committed on 7 Aug 2014
	5b7b7ee Browse files » Merge branch 'for-next/metadata' ... Conflicts: arch/arm/dts/Makefile common/Makefile lib/Makefile Sascha Hauer committed on 7 Aug 2014
	97e81f2 Browse files » Add support for metadata in barebox images ... It's often useful to get some information about a barebox image before starting or flashing it. This patch introduces barebox Image MetaData (IMD). When enabled a barebox image will contain a list of tags containing the desired information. We have tags for: - the barebox release (2014.07.0-00160-g035de50-dirty) - the build timestamp (#741 Mon Jul 28 15:08:54 CEST 2014) - the board model the image is intended for - the device tree toplevel compatible property Also there is an additional generic key-value store which stores parameters for which no dedicated tag exists. In this patch it is used for the memory size an image supports. Since there is no fixed offset in a barebox image which can be used for storing the information, the metadata is stored somewhere in the image and found by iterating over the image. This works for most image types, but obviously not for SoC images which are encoded or encrypted in some way. There is a 'imd' tool compiled from the same sources for barebox, for the compile host and for the target, so the metadata information is available whereever needed. For device tree boards the model and of_compatible tags are automatically generated. Example output of the imd tool for a Phytec phyFLEX image: build: #889 Wed Jul 30 16:08:54 CEST 2014 release: 2014.07.0-00167-g6b2070d-dirty parameter: memsize=1024 of_compatible: phytec,imx6x-pbab01 phytec,imx6dl-pfla02 fsl,imx6dl model: Phytec phyFLEX-i.MX6 Duallite Carrier-Board Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 7 Aug 2014
2014-08-04	8df8a3d Browse files » trivial: Correct word spelling, s/miscelleanous/miscellaneous ... Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ezequiel Garcia authored on 2 Aug 2014 Sascha Hauer committed on 4 Aug 2014
2014-08-02	2bcf7f4 Browse files » commands: add hwclock ... The hwclock command allows to query or set the hardware clock (RTC). Barebox' 'hwclock' command uses busybox' 'date' compatible time format ccyymmddHHMM[.SS]: # /bin/busybox date -s 201407292005.41 ; /bin/date Tue Jul 29 20:05:41 MSK 2014 Tue Jul 29 20:05:41 MSK 2014 Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 29 Jul 2014 Sascha Hauer committed on 2 Aug 2014
2014-07-18	4a872ae Browse files » USB: Kconfig: introduce USB_HOST symbol ... This renames USB to USB_HOST since this is what the symbol really means. Introduce a USB symbol which is selected by both USB_GADGET and USB_HOST. This gives us a symbol to let common USB code depend on. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 18 Jul 2014
2014-07-07	600d312 Browse files » at91mux: Fix both help info and Kconfig info. ... Correct options are, in fact, -p and -b. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Robert P. J. Day authored on 6 Jul 2014 Sascha Hauer committed on 7 Jul 2014
2014-07-07	01d3c9a Browse files » Clean up Kconfig and source for a couple device tree commands. ... Correct options listings for a couple device tree-related commands. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Robert P. J. Day authored on 4 Jul 2014 Sascha Hauer committed on 7 Jul 2014
2014-07-04	7a9bfaa Browse files » commands: add 'lspci' command ... Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 3 Jul 2014 Sascha Hauer committed on 4 Jul 2014
2014-06-02	93ba05b Browse files » bootm: beautify output ... * fix indentation of options in 'help bootm' * add missing help for -m * put some output into debug/verbose mode Signed-off-by: Holger Schurig <holgerschurig@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Holger Schurig authored on 30 May 2014 Sascha Hauer committed on 2 Jun 2014
	bfd5d7f Browse files » misc: upper-case some abbreviations ... Signed-off-by: Holger Schurig <holgerschurig@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Holger Schurig authored on 30 May 2014 Sascha Hauer committed on 2 Jun 2014
	c19c0da Browse files » drvlist: factor the driver list out of 'devinfo' ... The command 'devinfo' was first spitting out all devices, and then also all drivers. This patch separates them into two commands, 'devinfo' as before, and also the new command 'drvinfo' Signed-off-by: Holger Schurig <holgerschurig@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Holger Schurig authored on 30 May 2014 Sascha Hauer committed on 2 Jun 2014
2014-05-22	c72a050 Browse files » oftree: remove dump support ... This can now be done with the of_dump command. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 22 May 2014
2014-05-22	9cd128d Browse files » commands: add of_dump command ... The oftree command is overloaded. This adds a dedicated command which only dumps devicetrees to the console so that the corresponding functionality in the oftree command can be removed in the next step. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 22 May 2014
2014-05-14	2071940 Browse files » commands: move CONFIG_LONGHELP to commands/Kconfig ... Signed-off-by: Holger Schurig <holgerschurig@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Holger Schurig authored on 13 May 2014 Sascha Hauer committed on 14 May 2014
	fc0f7ee Browse files » commands: move CMD_IFUP to commands/Kconfig ... * this places the command into the "Network commands" section of Kconfig * while at it, improve Kconfig documention Signed-off-by: Holger Schurig <holgerschurig@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Holger Schurig authored on 13 May 2014 Sascha Hauer committed on 14 May 2014
	c524f74 Browse files » commands: NET_DHCP -> CMD_DHCP ... * this compile option actually turns on a command, so name it accordingly * also move the Kconfig definition into commands/Kconfig, thus placing getopt into the "Network commands" section * while at it, improve Kconfig documention Signed-off-by: Holger Schurig <holgerschurig@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Holger Schurig authored on 13 May 2014 Sascha Hauer committed on 14 May 2014
	5bd055b Browse files » commands: NET_PING -> CMD_PING ... * this compile option actually turns on a command, so name it accordingly * also move the Kconfig definition into commands/Kconfig, thus placing getopt into the "Network commands" section * while at it, improve Kconfig documention Signed-off-by: Holger Schurig <holgerschurig@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Holger Schurig authored on 13 May 2014 Sascha Hauer committed on 14 May 2014
	86dda11 Browse files » commands: introduce CMD_HOST ... ... because NET_RESOLV can be used alone to turn on the functionality of resolv(). Signed-off-by: Holger Schurig <holgerschurig@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Holger Schurig authored on 13 May 2014 Sascha Hauer committed on 14 May 2014
	c3e8dae Browse files » commands: let all network commands depend on NET ... ... by using an "if NET" ... "endif" clause. Signed-off-by: Holger Schurig <holgerschurig@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Holger Schurig authored on 13 May 2014 Sascha Hauer committed on 14 May 2014
	26a3410 Browse files » commands: HUSH_GETOPT -> CMD_GETOPT ... * this compile option actually turns on a command, so name it accordingly * also move the Kconfig definition into commands/Kconfig, thus placing getopt into the "Shell scripting commands" section * while at it, improve Kconfig documention Signed-off-by: Holger Schurig <holgerschurig@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Holger Schurig authored on 13 May 2014 Sascha Hauer committed on 14 May 2014
	6e3a969 Browse files » commands: move CMD_AT91MIX to commands/Kconfig ... * this places the command into the "Information commands" section of Kconfig * while at it, improve Kconfig documention Signed-off-by: Holger Schurig <holgerschurig@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Holger Schurig authored on 13 May 2014 Sascha Hauer committed on 14 May 2014
	c4909aa Browse files » commands: move CMD_AT91MUX to commands/Kconfig ... * this places the command into the "Information commands" section of Kconfig * while at it, improve Kconfig documention Signed-off-by: Holger Schurig <holgerschurig@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Holger Schurig authored on 13 May 2014 Sascha Hauer committed on 14 May 2014
	d1f7aa8 Browse files » commands: move CMD_AT91_BOOT_TEST to commands/Kconfig ... * this places the command into the "Boot commands" section of Kconfig * while at it, improve Kconfig documention Signed-off-by: Holger Schurig <holgerschurig@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Holger Schurig authored on 13 May 2014 Sascha Hauer committed on 14 May 2014
	efb18d8 Browse files » commands: move CMD_BOOT_ORDER to commands/Kconfig ... * this places the command into the "Boot commands" section of Kconfig * while at it, improve Kconfig documention Signed-off-by: Holger Schurig <holgerschurig@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Holger Schurig authored on 13 May 2014 Sascha Hauer committed on 14 May 2014
	d4ee397 Browse files » commands: move CMD_ARM_MMUINFO to commands/Kconfig ... * this places the command into the "Information commands" section of Kconfig * while at it, imprive Kconfig documention Signed-off-by: Holger Schurig <holgerschurig@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Holger Schurig authored on 13 May 2014 Sascha Hauer committed on 14 May 2014
	65fd693 Browse files » commands: move CMD_ARM_CPUINFO to commands/Kconfig ... * this places the command into the "Information commands" section of Kconfig * while at it, imprive Kconfig documention Signed-off-by: Holger Schurig <holgerschurig@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Holger Schurig authored on 13 May 2014 Sascha Hauer committed on 14 May 2014
	013ee1e Browse files » commands: CMD_DIGEST -> COMPILE_DIGEST ... This config just turned on the compilation of digest.c (used by 'SHA1', 'sha256sum' etc), so name it accordingly. Signed-off-by: Holger Schurig <holgerschurig@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Holger Schurig authored on 13 May 2014 Sascha Hauer committed on 14 May 2014
	07d90fd Browse files » commands: CMD_MEMORY -> COMPILE_MEMORY ... * CMD_MEMORY was defined both in common/Kconfig and commands/Kconfig * that symbol turned not a command on, but just the compilation of commands/mem.c, so rename it accordingly Signed-off-by: Holger Schurig <holgerschurig@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Holger Schurig authored on 13 May 2014 Sascha Hauer committed on 14 May 2014