LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / drivers

2014-07-31	889105e Browse files » net: phy: Add fallbacks for the obsoletes phy DT properties ... In addition to the standard 'phy-handle' devicetree property, the binding specifies two properties, which are considered obsolete: 'phy' and 'phy-device'. This commit adds support for them in of_mdio_find_phy(). Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ezequiel Garcia authored on 29 Jul 2014 Sascha Hauer committed on 31 Jul 2014
	ed98f15 Browse files » Add a simple rtc framework ... This patch adds a simple rtc framework for reading and setting board's RTC time. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 29 Jul 2014 Sascha Hauer committed on 31 Jul 2014
	5a9ba98 Browse files » pci: mvebu: Add PCIe driver ... This adds a PCI driver for the controllers found on Marvell MVEBU SoCs. Besides the functional driver itself, it also adds SoC specific PHY setup required for PCIe. Currently, only Armada 370 is fully supported. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sebastian Hesselbarth authored on 30 Jul 2014 Sascha Hauer committed on 31 Jul 2014
	846da3d Browse files » of: pci: import of_pci_get_devfn() ... Marvell MVEBU PCIe driver requires of_pcie_get_devfn(), import it from Linux. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sebastian Hesselbarth authored on 30 Jul 2014 Sascha Hauer committed on 31 Jul 2014
	916ca94 Browse files » pci: set auto-incremented bus number ... When using more than one PCI bus, we have to assign unique numbers to each bus. Use an auto-incremented bus index and assign it to each registered bus. Also, allow the PCI host controller to update internal registers by calling set_busno with assigned bus number. While at it, add pci_controller struct to set_busno callback, add a back reference to pci_controller to pci_bus, and clean up unused left-overs from Linux import. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sebastian Hesselbarth authored on 30 Jul 2014 Sascha Hauer committed on 31 Jul 2014
	e5a91ee Browse files » pci: ensure device does ignore BAR mangling ... Disable access to PCI devices I/O and memory regions while mangling BAR registers. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sebastian Hesselbarth authored on 30 Jul 2014 Sascha Hauer committed on 31 Jul 2014
	166a6ba Browse files » pci: register device after BAR setup ... As soon as pci_register_device is called, a potential driver will access its registers. This requires BARs to be set up properly, so move pci_register_device after BAR setup. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sebastian Hesselbarth authored on 30 Jul 2014 Sascha Hauer committed on 31 Jul 2014
	b7ffe9a Browse files » pci: pci_scan_bus: respect 64b BARs ... In PCI 64-bit BARs span two 32-bit BARs, therefore if BAR type indicates a 64-bit BAR we have to skip the next BAR register. While at it, also set proper IORESOURCE flags for I/O and 32b MEM. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sebastian Hesselbarth authored on 30 Jul 2014 Sascha Hauer committed on 31 Jul 2014
	722e90e Browse files » bus: mvebu: fix resource size handling ... A resource_size is defined as res->end - res->start + 1. Marvell MBUS driver gets some ranges from DT as start and size but mis-calculates end of range. This fixes 4 occurences of those mistakes. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sebastian Hesselbarth authored on 30 Jul 2014 Sascha Hauer committed on 31 Jul 2014
2014-07-29	1f789df Browse files » gpio: add driver for Canon DIGIC ... Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 28 Jul 2014 Sascha Hauer committed on 29 Jul 2014
	fd00d69 Browse files » serial: add driver for Canon DIGIC UART ... Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 28 Jul 2014 Sascha Hauer committed on 29 Jul 2014
	bbd4776 Browse files » clocksource: add driver for Canon DIGIC timer ... Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 28 Jul 2014 Sascha Hauer committed on 29 Jul 2014
	03a2269 Browse files » led: try to get LED's label from the 'label' property ... Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 29 Jul 2014 Sascha Hauer committed on 29 Jul 2014
	366f64f Browse files » mci: core: the sd1.0 card can work in 4 bits mode ... The sd 1.0 card can work in 4 bits mode also. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Bo Shen authored on 29 Jul 2014 Sascha Hauer committed on 29 Jul 2014
	e69dca9 Browse files » mfd: mc34704: Add DT support ... Add a compatible to this driver so it can be added through devicetree. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Markus Pargmann authored on 28 Jul 2014 Sascha Hauer committed on 29 Jul 2014
2014-07-25	11db6df Browse files » i2c: add Atmel AT91 driver ... Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Raphaël Poggi authored on 24 Jul 2014 Sascha Hauer committed on 25 Jul 2014
2014-07-25	315e1a4 Browse files » ARM: mvebu: allow to fixup mbus ranges ... On Marvell MVEBU SoCs internal registers are usually remapped from reset default. While Dove and Kirkwood always had their registers remapped, some Armada 370 and XP where shipped with bootloaders that did not remap them. On Barebox these registers are remapped early and on all MVEBU SoCs, so provided DTs should always reflect that in their mbus ranges property. This patch registers a fixup for DTBs and allows individual SoCs to add specific remap ranges to the fixup list. The fixup is registered on pure_initcall to even allow to fixup pbl or appended DTBs. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sebastian Hesselbarth authored on 23 Jul 2014 Sascha Hauer committed on 25 Jul 2014
2014-07-23	7d664f9 Browse files » clk: clk-divider: divider calculation in clk_set_rate needs DIV_ROUND_UP ... To make the resulting rate is always smaller than the desired rate, and not bigger. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 23 Jul 2014
	752b9f4 Browse files » gianfar: descriptors access with I/O accessors ... As in U-Boot git-9c9141f, make read/write access to the TX/RX descriptors CPU agnostic. Signed-off-by: Renaud Barbier <renaud.barbier@ge.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Renaud Barbier authored on 22 Jul 2014 Sascha Hauer committed on 23 Jul 2014
	d0e0a97 Browse files » pinctrl: mvebu: add pinctrl driver for Armada XP ... This adds a pinctrl driver for pin muxing on Marvell Armada XP. The driver is ported from Linux and modified to fit on Barebox's common mvebu pinctrl driver. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sebastian Hesselbarth authored on 22 Jul 2014 Sascha Hauer committed on 23 Jul 2014
	fe0ed89 Browse files » pinctrl: mvebu: add pinctrl driver for Armada 370 ... This adds a pinctrl driver for pin muxing on Marvell Armada 370. The driver is ported from Linux and modified to fit on Barebox's common mvebu pinctrl driver. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sebastian Hesselbarth authored on 22 Jul 2014 Sascha Hauer committed on 23 Jul 2014
2014-07-22	b326568 Browse files » sandbox: allow "make ARCH=sandbox allyesconfig" ... Compiling the tree with allyesconfig is helpful because different compilers (gcc, clang) or static checkers (e.g. clang's scan-build) can then process and check more code. This patch introduces two new configuration symbols that Kconfig files can depend on. That way, code that is only working where a cache or DMA implementation exists can be opted out. Signed-off-by: Holger Schurig <holgerschurig@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Holger Schurig authored on 22 Jul 2014 Sascha Hauer committed on 22 Jul 2014
2014-07-18	9451a44 Browse files » USB: Remove conflicting USB_SPEED_* definitions ... We have USB_SPEED_* definitions as macros in usb_defs.h and as an enum in ch9.h. The defines in usb.h correspond to hardware bits in the ehci controller. Get rid of them and keep the hardware independent enums. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 18 Jul 2014
	f0a1a84 Browse files » USB: Use descriptors from ch9.h ... Use the descriptors from ch9.h instead of duplicating them in usb.h Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 18 Jul 2014
	245069b Browse files » USB: introduce usb_interface/usb_configuration structs ... Currently we have two conflicting definitions of struct usb_config_descriptor and struct usb_interface_descriptor in the tree. This is because the USB code uses additional fields in the structs for internal housekeeping. Add struct usb_interface and struct struct usb_configuration with the housekeeping data and embed the corresponding hardware structs into them. This frees the way to use the definitions from ch9.h in the next step. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 18 Jul 2014
	4a872ae Browse files » USB: Kconfig: introduce USB_HOST symbol ... This renames USB to USB_HOST since this is what the symbol really means. Introduce a USB symbol which is selected by both USB_GADGET and USB_HOST. This gives us a symbol to let common USB code depend on. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 18 Jul 2014
	151d21b Browse files » mtd: atmel_nand: enable PMECC for 8k page nand ... Enable the PMECC to support 8k page. Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com> Acked-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Raphael Poggi authored on 17 Jul 2014 Sascha Hauer committed on 18 Jul 2014
	d581be7 Browse files » mtd: atmel_nand: fix bit error correction ... When pmecc uses a 1024 sector size to correct bit error, the gf dimension must be 14. So this commit chooses the right degree for different sector size (512 or 1024). Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Raphael Poggi authored on 17 Jul 2014 Sascha Hauer committed on 18 Jul 2014
	c280f53 Browse files » mtd: atmel_nand: increase chip_delay ... Some nand like Micron MT29F32G08ABAAAWP need more than 20us. Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com> Acked-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Raphael Poggi authored on 17 Jul 2014 Sascha Hauer committed on 18 Jul 2014
2014-07-17	8ca0f65 Browse files » mtd: atmel_nand: add SOFT_BCH support ... To use soft ecc with nand with 8k page, we need the BCH support. This commit adds the possibilty for atmel_nand to enable SOFT_BCH. Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Raphael Poggi authored on 15 Jul 2014 Sascha Hauer committed on 17 Jul 2014