Introduce dev_set_name() in order to hide implementation details of
setting device's name so it'd be easier to change it.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Create a private ubi_eba_table struct to hide EBA internals and provide
helpers to allocate, destroy, copy and assing an EBA table to a volume.

Now that external EBA users are using helpers to query/modify the EBA
state we can safely change the internal representation, which will be
needed to support the LEB consolidation concept.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
[Fix conflicts]
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

When the volume resize operation shrinks a volume,
LEBs will be unmapped. Since unmapping will not erase these
LEBs immediately we have to wait for that operation to finish.
Otherwise in case of a power cut right after writing the new
volume table the UBI attach process can find more LEBs than the
volume table knows. This will render the UBI image unattachable.

Fix this issue by waiting for erase to complete and write the new
volume table afterward.

Cc: <stable@vger.kernel.org>
Reported-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

My static checker says that "err" can be uninitialized if
"vol->reserved_pebs" is <= 0.  I don't think that can happen but
returning a literal is cleaner anyway.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Giorgio Dal Molin <iw3gtf@arcor.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

`vol' is a newly allocated value by kzalloc. Initialize it by assignment
instead of `+='.

Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

If there is more then one UBI device mounted, there is no way to
distinguish between messages from different UBI devices.
Add device number to all ubi layer message types.

The R/O block driver messages were replaced by pr_* since
ubi_device structure is not used by it.

Amended a bit by Artem.

Signed-off-by: Tanya Brokhman <tlinder@codeaurora.org>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>

Conflicts:
	drivers/mtd/ubi/block.c
	drivers/mtd/ubi/build.c
	drivers/mtd/ubi/cdev.c
	drivers/mtd/ubi/debug.c
	drivers/mtd/ubi/fastmap.c
	drivers/mtd/ubi/io.c
	drivers/mtd/ubi/ubi.h
	drivers/mtd/ubi/vmt.c
	drivers/mtd/ubi/wl.c

Reworked it for barebox.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The FSF address has changed; The FSF site says that
address is

  Free Software Foundation
  51 Franklin Street, Fifth Floor
  Boston, MA 02110-1301
  USA

(see http://www.fsf.org/about/contact/)

Instead of updating it each time the address changes,
just drop it completely treewide.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

struct ubi_device and struct ubi_volume have devices attached
to them. Register them to make them part of the barebox device
hierarchy.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This is necessary to update the fastmap after ubi manipulations.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This is a fresh UBI import from Linux v3.10

This is done mainly to get fastmap support.

This was tested with the i.MX nand driver, the MXS nand driver and
on CFI NOR flash.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

To update to the latest UBI support from the Kernel first remove
the old UBI support. Without it the update will be even less reviewable.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The FSF address has changed in the past. Instead of updating it
each time the address changes, just drop it completely treewide.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This adds the layer between barebox and UBI.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>