Merge branch 'for-next/kvx'

Merge branch 'for-next/imx'

Merge branch 'for-next/fastboot'

Merge branch 'for-next/elf'

arm: imx: add initial imx8mp support ...

This adds base support for the i.MX8MP SoC. Not much to do here as this
SoC is quite similar to the i.MX8M. This adds:

- Kconfig symbols
- bootsource detection
- register base address defines
- iomux defines

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>

fs: fat: extend for in-PBL support ...

The AT91 BootROM loads a boot.bin file from the first FAT partition
into SRAM, when booting from MMC. To avoid the need for two barebox
configurations for each of the bootloader stages, add PBL support
for reading from FAT. This way each stage need only have a different
PBL entry point.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common: Kconfig: remove MIPS dependency for ELF ...

There is no reason anymore to limit the use of elf on mips since there
is no elf specific support needed in architectures. Drop the MIPS
dependency.

Signed-off-by: Clement Leger <cleger@kalray.eu>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common: bootm: allow building with an undefined IH_ARCH ...

Some architectures might not want to support uImage. To do so, allow
IH_ARCH to be let undefined which will make it possible to compile boot
support.

Signed-off-by: Clement Leger <cleger@kalray.eu>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fastboot: Drop support for downloading to buffer ...

The option to download to a buffer instead of a file was introduced
because in some workloads it is required to have a contiguous image
in memory. With recent changes now ramfs can provide such a buffer
via memmap API even when it downloaded the data to a file. This makes
the explicit download to buffer option unnecessary, so remove it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common: bootm: add support for elf file loading ...

This will allows elf loader to directly have an elf file available. Thus
filetype_elf bootm handlers will be able to use standard bootm functions
and data.

Signed-off-by: Clement Leger <cleger@kalray.eu>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common: elf: add elf_open, elf_close and elf_load ...

In order to integrate elf loading into bootm command, split elf opening
from elf loading.

Signed-off-by: Clement Leger <cleger@kalray.eu>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common: elf: load elf directly from file ...

Currently, elf file must be loaded into a buffer and then passed to
elf_load_image. This requires to copy the whole elf file before booting
it. This commit allows to pass the filename directly and will allocate
data only for the elf header (elf header + program headers). This will
then be used to load the elf data from the file without copying it in an
intermediate buffer. Elf segments are first parsed into a list and are
then loaded from the file in a second time.

Signed-off-by: Clement Leger <cleger@kalray.eu>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common: elf: check number of elf program headers ...

An elf file without program headers should not be loaded. Add a check
for such cases.

Signed-off-by: Clement Leger <cleger@kalray.eu>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common: elf: use calloc instead of xzalloc ...

This failure can be handled grecefully, use standard calloc.

Signed-off-by: Clement Leger <cleger@kalray.eu>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common: elf: fix warning on 32 bits architectures ...

When pointers are 32 bits wide and we cast a potentially 64 bits
value in it, the compiler will yield an error. Cast that value first
into a phys_addr_t to match the architecture pointer size and then
in a void *.

Signed-off-by: Clement Leger <cleger@kalray.eu>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common: elf: add computation of elf boundaries ...

In order to correctly load an initrd or a device tree after an elf file,
we need to know its boundaries. This commit adds support for that and
allow the bootm implementations to use it for memory loading.

Signed-off-by: Clement Leger <cleger@kalray.eu>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fastboot: Use make_temp() to create temporary file ...

make_temp() was created for this purpose, so use it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/ratp'

Merge branch 'for-next/misc'

Merge branch 'for-next/kbuild'

password: Fix warning with empty default password ...

When CONFIG_PASSWORD_DEFAULT is unset, the default_passwd buffer is set
to the empty string. The read_default_passwd() function wants to read at
least two characters from that buffer, causing GCC to generate an array
bounds warning:

barebox/common/password.c: In function 'login':
barebox/common/password.c:173:5: warning: array subscript [1, 2147483647] is outside array bounds of 'const char[1]' [-Warray-bounds]
In file included from barebox/common/password.c:30:
include/generated/passwd.h:1:19: note: while referencing 'default_passwd'

Add an ARRAY_SIZE check to default_passwd so that the loop is optimized
away and the warning is no longer generated. Since the
read_default_passwd() function is only called when default_passwd is not
the empty string, this is not a functional change.

Signed-off-by: David Dgien <dgienda125@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

password: don't export read_default_passwd() ...

This function is used only in common/password.c itself, so it doesn't
need to be exported.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

blspec: Allow the "options" key to be given multiple times ...

The Boot Loader Spec says:
"This key is optional and may appear more than once in which case all
specified parameters are used in the order they are listed."

Signed-off-by: Robert Karszniewicz <r.karszniewicz@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fastboot: Use unique tempfile name ...

With fastboot over ethernet we now can have two instances of fastboot
running in parallel. Make sure that both instances use a different
temporary file to store data so that they do not influence each other.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fastboot: don't close fd 0 when downloading to ram ...

When downloading to a buffer, download_fd is never assigned a valid file
descriptor. We should therefore avoid calling close on the value found
in that variable.

Signed-off-by: Daniel Glöckner <dg@emlix.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fastboot: split generic code from USB gadget ...

The fastboot specification describes other protocols beyond USB. Allow
these to reuse the generic parts of the existing fastboot code when they
are implemented.

Most of the changes in common/fastboot.c are due to the renaming of struct
f_fastboot *f_fb to struct fastboot *fb.

Signed-off-by: Edmund Henniges <eh@emlix.com>
Signed-off-by: Daniel Glöckner <dg@emlix.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

poller: Add a poller command ...

The poller command allows to print which pollers are registered and also
how many times we can run the registered pollers in one second.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

poller: Give pollers a name ...

It helps debugging when pollers have a name, so give them one.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

kconfig: add 'option modules' to allow tristate options to become m ...

Since commit 18895514dc5e ("kconfig: update to v3.18-rc6"), tristate
symbols cannot become 'm'.

In old days of Linux, CONFIG_MODULES was the special option hard-coded
in Kconfig.

The current Kconfig does not know which option is it. You need to
specify 'option modules' to teach Kconfig that it is the module
support switch.

Add 'option modules' to revive the module builds.

Fixes: 18895514dc5e ("kconfig: update to v3.18-rc6")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ratp: Remove unnecessary poller_call() ...

poller_call() is called by is_timeout(), no need to do this again in a
timeout loop.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>