module: Implement HAVE_MOD_ARCH_SPECIFIC ...

Implement HAVE_MOD_ARCH_SPECIFIC Kconfig and module_frob_arch_sections()
function prototype from Linux module subsystem.
module_frob_arch_sections() should be implemented by any architecture
that selects HAVE_MOD_ARCH_SPECIFIC, and is called from load_module()

Signed-off-by: David Dgien <dgienda125@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

include: bitops: fix dead increment in fls() and ffs() ...

Static analyzers trip over this dead increment. It arguably
doesn't improve readability, so just drop the dead code.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

include: <asm-generic/atomic.h>: remove stub IRQ save/restore ...

For an architecture to use <asm-generic/atomic.h>, it must define
local_irq_save() and local_irq_restore(). Instead of having every
platform define duplicate their stub definition, just drop them
altogether, so <asm-generic/atomic.h> can be used freestanding.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: atomic.h: move generic implementation to asm-generic ...

For easier code-sharing, the UBIFS code still uses the Linux atomic
accessors.  Make porting it to sandbox easier, by providing these
functions for all platforms.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

include: asm-generic: provide (in|out)_(le|be)(16|32) helpers for all archs ...

These U-Boot style bitwise operations macros will be needed for
COMPILE_TEST-compiled drivers on platforms except for ARM. Add fallback
definitions there, based on the ARM ones.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common.h: move the generic IOMEM definition to asm-generic/io.h ...

arch/mips/include/asm/io.h defines arch-specific IOMEM().

The generic definition of IOMEM() should go to asm-generic/io.h
because it is a collection of fallback defaults when there is no
specific definition in <asm/io.h>.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: add optee early loading function ...

Add a OP-TEE early loading function which expects a pointer to a valid
tee binary and the device tree. OP-TEE will then be started and barebox
will continue to run in normal mode.

The function start_optee_early should be used in a boards lowlevel.c
file. Ensure that barebox has been relocated and a proper c environment
has been setup beforehand. Depending on the OP-TEE configuration, the
fdt will be modified. If the internal barebox device tree is passed,
OP-TEE will overwrite barebox PBL memory during this modification. Copy
the fdt to a save memory location beforehand to avoid a corruption of
barebox PBL memory.

This also moves the OP-TEE Kconfig symbols into a separate menu.

Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

lds: align RO_DATA_SECTION members ...

When using the RO_DATA_SECTION macro, all the individual components
are put into the rodata section. As they now end up in the same
section there is no alignment enforced between them anymore. This
leads to unaligned start pointers when any of the components have a
unaligned size. Enforce some alignment between them.

Fixes: c5d38e920101 (lds: Add and use RO_DATA_SECTION macro)
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: zynq: move header generation to zynq_mkimage ...

Instead of generating a suitable image header with linker magic, move
all of this into zynq_mkimage. The configuration file format and parsing
is based on imx-image. This gets us one step further on the road to
proper multi-image support.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

rsa: Allow to directly compile in rsa public keys ...

So far we relied on the U-Boot mkimage tool to generate us device tree
snippets containing rsa public keys which we then compiled into barebox.
Make this easier and allow to directly specify a filename or PKCS#11 URI
in Kconfig. With this we no longer need the U-Boot mkimage tool here and
no more external steps to prepare device tree snippets.

With this rsa public keys can be directly compiled as C structs into
barebox which is much more direct than putting it into the device tree.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

lds: Add and use RO_DATA_SECTION macro ...

We have many different pointer arrays which we put into linker sections
and each time there's one added we have to adjust all linker scripts.
This adds a common RO_DATA_SECTION define and uses it for all
architectures. This makes it easier to add a new linker array.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

lds: remove more unnecessary alignments ...

The alignment in the DTB and clk_of_table shouldn't be needed. Remove
them.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>

lds: create and use BAREBOX_PCI_FIXUP macro ...

No need to repeat the pci fixup sections in each linker script. Add a
define for it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

lds: Move start/end address variables into defines ...

For the older section defines we specify the start and end addresses
outside the macro which means we have to repeat them in each linker
script. Make the start/end addresses part of the define to simplify
things. While at it, add a BAREBOX_ prefix to the INITCALLS and EXITCALLS
macros for consistency to the other defines.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>

barebox.lds: Remove unnecessary braces ...

The BAREBOX_CLK_TABLE and BAREBOX_DTB macros are defines that do not
take a parameter, so we can remove the braces.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

sections: fix macro for barebox_pbl_size ...

On ARM64 this did not contain the expected barebox_pbl size. Rework this
to be a substraction between __piggydata_start and __image_start, which
should cover the whole PBL.

Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: Initial OP-TEE support ...

This adds initial support for OP-TEE, see https://www.op-tee.org/

barebox starts in secure mode as usual. When booting a kernel
the bootm code also loads the optee_os binary. Instead of jumping
into the kernel barebox jumps into the optee_os binary and puts
the kernel execution address into the lr register. OP-TEE then
jumps into the kernel in nonsecure mode.

The optee_os binary is passed with the -t option to bootm or
with global.bootm.tee.

Optionally OP-TEE can be compiled into barebox using the builtin firmware
feature. Enable the Kconfig option and place or link your tee binary as
optee.bin into the firmware directory.

The amount of SDRAM which is kept free for OP-TEE is configurable.

This patch was tested on a i.MX6 Nitrogen6x board.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ratp: implement generic command support ...

The RATP implementation now allows executing generic commands with a
binary interface: binary requests are received and binary responses
are returned.

Each command can define its own RATP request contents (e.g. to specify
command-specific options) as well as its own RATP response contents
(if any data is to be returned).

Each command is associated with a pair of numeric unique request and
response IDs, and for easy reference these IDs are maintained in the
common ratp_bb header. Modules may override generic implemented
commands or include their own new ones (as long as the numeric IDs
introduced are unique).

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

asm-generic: partially sync io.h with linux kernel ...

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: start: Fix image size calculation ...

In barebox_non_pbl_start() we do not run at the address we are linked
at, so we must read linker variables using ld_var(). Since ld_var()
current is not available on arm64 we create two zero sized arrays,
one at the begin of the image and one at the end. The difference
between both is the image size we are looking for.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/ubifs'

ARM: Add atomic.h from u-boot v2016.03 ...

atomic-long.h:
* Replace __UBOOT__ with __BAREBOX__

Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX: remove unused imx-flash-header.h ...

All i.MX images are nowadays built with the imx-image tool, so we do not
need the header files and Kconfig options anymore. Remove them.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

crypto: add RSA support ...

Taken from U-Boot and adopted to barebox with little changes.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

gpio: Drop asm-generic/gpio.h ...

Since we no longer have custom gpio function prototypes we can
drop the prototypes from asm-generic/gpio.h can add them to
include/gpio.h instead. While at it add static inline dummy wrappers
for !CONFIG_GENERIC_GPIO so that code using gpios can compile without
gpio support.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

exitcall: Add exitcall infrastructure ...

exitcall infrastructure is based on initcall infrastructure.
It allows to have and use exit call hooks on barebox shutdown.

Signed-off-by: Herve Codina <Herve.CODINA@celad.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: of: fix clk_of_table generation ...

We used to collect all sections beginning with __clk_of_table_ in a single
section in the linker using KEEP(*(.__clk_of_table_*)). That the sentinel
entry ended up as the last entry was pure luck, but not always the case.

Instead of putting all entries in different sections we now put all entries
in the same section. Only the sentinel entry gets its own section and is
collected by the linker separately.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reported-by: Andreas Willig <andreas.willig@rafi.de>
Tested-by:  Andreas Willig <andreas.willig@rafi.de>

Merge branch 'for-next/posix_types'

introduce generic posix_types.h ...

Most types defined in posix_types.h are architecture independent,
so instead of repeating this for each architecture add a generic
file that can be used by architecture code. To use it an architecture
must define BITS_PER_LONG properly in asm/bitsperlong.h.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

drop __BITS_PER_LONG ...

The kernel has __BITS_PER_LONG and BITS_PER_LONG. The formaer
is needed for architectures which support 32bit userspace on a
64bit kernel. This is not relevant for barebox, so drop
__BITS_PER_LONG and use BITS_PER_LONG only.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>