The i.MX6ull-EVK is a evaluation board for the i.MX6ull from NXP.
The upstream DTS is used, support should be fairly complete:

- 2x fec ethernet
- 1x USB Host
- 1x USB OTG
- 2x SD

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The NoC regulator only passes the QoS signals through if it is
in bypass mode. This is a safe setting to give the IPU priority
over other requests. The kernel may change it to some other setting
once it knows the bandwidth requirements of the use-case.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

To reduce the devicetree files for one board with different memory sizes the
memory size can be read back from i.MX6.

Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This adds the IPU, LVDS and HDMI clocks. As these are many, depend
on the IPU driver being compiled in.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The i.MX6 uses the same GPMI NAND controller as i.MX23/28 do. This adds
i.MX6 support to the driver.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

What we had as usb phy1 base address is really usb phy2. Fix the names
and add the missing base address definition for usb phy1.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This also adds and enables the clocks needed for SATA.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

To get rid of the register definitions in the SoC header files.
platform_device_id is used to distinguish between gpt types.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>