ARM: at91: pass along bootsource to netbooted barebox ...

ROM-Code passes boot source information in r4. First stage does likewise
when invoking second stage. When net booting second stage, r4 has no
definite value. Fix this and pass the original boot source along.

This gives us a valid $bootsource value in net booted barebox, which is
important, so the same environment is loaded.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91: add basic sama5d2 support ...

Add hardware description, chip identification and clock changes to
support the sama5d2 SoC.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91: replace __raw_{readl, writel} of peripherals with readl, writel ...

Use the potentially endianness-changing readl, writel and siblings
directly. They looks prettier and are the correct thing to do, as
even if the CPU is in big-endian mode, the peripherals are little-endian.

Unlike Linux, barebox readl,writel are the same Linux'
{readl,writel}_relaxed (they don't imply memory barriers)
and thus there shouldn't be any functional change.

Patch was generated by a mass search and replace. I looked it over,
adjust some whitespace and further verified by reviewing the output of

	git diff HEAD~1 --word-diff | \
		perl -pe 's/\[-(.*?)__raw_/{+$1/; s/-\]\{\+/+}{+/;' \
		-e 's/(\{\+.*?\+\})\1/__ALL_IS_WELL__/' | grep '+}{+'

which filters out the common case of lines where a single
__raw_{readT,writeT} had its __raw_ prefix stripped without any
further changes.

Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: AT91: add missing includes ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: AT91: remove unused function ...

at91rm9200_set_type() is unused. Remove it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91: separate restart handler registration into SoC specific code ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91: consolidate phy reset functions ...

Many boards have the same ethernet phy reset function, so share the code
in a common function.
While at it remove the AT91_RSTC offset from the rstc register defines.
AT91_RSTC was the offset between the AT91_SYSTEM_BASE and the reset
controller.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: at91: simplify soc setup ...

The at91 soc support inherited a complex scheme
from the kernel.
This schme did not really give any benefits, and when
starting to migrate at91sam9263ek to use DT it started
to get in the way for a proper way to do things.

Replace the former setup with a simple function
pointer that can be called from setup.c.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

at91sam9x5ek: Convert to use DT clock tree ...

Convert board code to use clock tree form DT as well as converting UART,
GPIO and PIT devices to be instantiated from it (to make sure codebase
is still bootable).

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

restart: replace reset_cpu with registered restart handlers ...

This replaces the reset_cpu() function which every SoC or board must
provide with registered handlers. This makes it possible to have multiple
reset functions for boards which have multiple ways to reset the machine.
Also boards which have no way at all to reset the machine no longer
have to provide a dummy reset_cpu() function.

The problem this solves is that some machines have external PMICs or
similar to reset the system which have to be preferred over the
internal SoC reset, because the PMIC can reset not only the SoC but also
the external devices.

To pick the right way to reset a machine each handler has a priority. The
default priority is 100 and all currently existing restart handlers are
registered with this priority. of_get_restart_priority() allows to retrieve
the priority from the device tree which makes it possible for boards to
give certain restart handlers a higher priority in order to use this one
instead of the default one.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: atmel: at91sam9n12: add subtype support ...

As the at91sam9n12 series includes at91sam9n12, at91sam9cn11,
at91sam9cn12. So, add subtype to distinguish them.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91: add sama5d4 soc support #1 ...

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: atmel: sama5d3 is a family member of sama5 ...

As the sama5d3 is a family member of sama5, so only check sama5
family.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91: add missing break ...

Otherwise SAM A5d35 would be detected as A5d36.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Acked-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91: add sama5d36 SoC support ...

SAMA5D36 SoC is a sub type of SAMA5D3 which has two Ethernets

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91: move main clock define to C ...

This will allow to drop the config.h and switch to multi board support

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

at91: add sama5d3 support ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

at91: autodetect the soc one time at postcore_initcall ...

and then register a device

The code is take from linux

drop AT91_BASE_SYS for dbgu

factorise the soc type in the Kconfig but keep the ARCH_ so far
as the device code have the same function accross soc which for now does not
allow us to compile soc together

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>