Some Arria10 boards don't have the FPGA programmed externally.
Instead barebox needs to do that. As the Arria10 has the SDRAM
controller in the FPGA, the first thing we need to do is,
configure the FPGA before the SDRAM can even be used.

It works like this:
  1. boot ROM fetches the PBL from MMC
  2. read the MBR from MMC (this depends on the setup done by the boot ROM)
  3. read the Bitstream from the MMC and program the FPGA
  4. re-read the barebox image from MMC, this time with the full barebox
     that is appended to the PBL
  5. jump into the full barebox

Only supported boot device is eMMC.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Arria10 is a SoC + FPGA like the Cyclone5 SoCFPGA that
is already supported in barebox.
Both a the same in some parts, but totaly different in
others. Most of the hardware blocks are the same in the
SoC parts. The OCRAM is larger on the Arria10 and the
SDRAM controller is different.
The serial core only supports 32bit accesses (different to
the 8bit accesses on the Cyclone5).

As Arria10 has 256KB of OCRAM, it is possible to fit a larger
barebox (and/or use PBL) instead of the two stage bootprocess
used on the Cyclone5 and its 64KB OCRAM.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

So far it was hardcoded for each board if defenv-1 or defenv-2 is used.
Make this a user choice so that a particular board no longer enforces
a defenv type.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

v7: eof whitespace fixes

A Patch for supporting the Terasic DE0 NANO-SoC with barebox.
The pretty similar Socrates Board was taken as a starting point with pulling
in the memory timings/pinmux from
http://rocketboards.org/foswiki/view/Documentation/AtlasSoCCompileHardwareDesign

Signed-off-by: Tim Sander <tim@krieglstein.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

As SoCFPGA is multi-image enabled there is no real reason
to bother the user with asking for the text base. Fixes a
bunch of randcfg failures.

Regenerate defconfig to drop the explicit config there, which
unfortunately introduces quite a bit of churn.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add support for the Altera SoCFPGA Development Kit.
The setup is based on the GHRD from Altera.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>