Move the setup of the shared- and fpgapins to its own function.
These pins can only be configured and let out of reset after the FPGA has been
programmed.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Instead of copy+pasting the debug_ll messages to every new board,
move them to the respective functions.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Enable workarounds for two of the errata the CPU is affected
with.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Arria10 is a SoC + FPGA like the Cyclone5 SoCFPGA that
is already supported in barebox.
Both a the same in some parts, but totaly different in
others. Most of the hardware blocks are the same in the
SoC parts. The OCRAM is larger on the Arria10 and the
SDRAM controller is different.
The serial core only supports 32bit accesses (different to
the 8bit accesses on the Cyclone5).

As Arria10 has 256KB of OCRAM, it is possible to fit a larger
barebox (and/or use PBL) instead of the two stage bootprocess
used on the Cyclone5 and its 64KB OCRAM.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>