regmap: port regmap_update_bits from linux ...

Port the regmap_update_bits function from linux v4.14-rc1 to barebox.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Marvell: implement marvell_of_reg_init ...

From ed1cbcd Mon Sep 17 00:00:00 2001
From: Clement Leger <clement.leger@kalray.eu>
Date: Tue, 10 Oct 2017 14:29:49 +0200
Subject: [PATCH] Marvell: implement marvell_of_reg_init

Implement marvell_of_reg_init in order to use marvell,reg-init property
from device-tree. The code is taken from Linux kernel and slighlty
modify to fit barebox structures.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: m25p80: make it possible to use 4K erase block ...

We already have the MTD_SPI_NOR_USE_4K_SECTORS option handling in C code
for 4K erase block support. Alas this 4K erase block support code
can't be used because the MTD_SPI_NOR_USE_4K_SECTORS option support
is missed in Kconfig.

This patch imports necessary Kconfig MTD_SPI_NOR_USE_4K_SECTORS option
declaration from linux v4.11-rc8.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

UBI: attach: add missing newline at end of pr_err() ...

This patch adds the missing newline at the end of the pr_err()
statement.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mmc: allow skipping SD card initialization ...

This patch allows to skip SD card initialization for eMMCs by setting
the "no-sd" property in the host controller device tree node. Avoiding
two SD command timeouts speeds up detection time by well over 200 ms.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

remove checks for xzalloc() returning NULL ...

xzalloc() either returns memory or panics, so checking for NULL is useless.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

pinctrl: mxs: fix error message to mention right property name ...

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

gpiolib: check validity for gpio_info in *_active() ...

gpio_set_active, gpio_is_active and gpio_direction_active are public
functions, accordingly there should be error checking.

If an invalid gpio number is given to these functions without checking
gpio_adjust_value is called with gi == NULL which then dereferences this
pointer.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/net'

Merge branch 'for-next/mtd'

Merge branch 'for-next/misc'

Merge branch 'for-next/imx'

Merge branch 'for-next/at91'

gpio: gpio-generic: add dt support ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

gpio: gpio-generic: fix bgpio_map() ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

serial: ns16550: provide big-endian support ...

we need it at least for QCA AR9344

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: base: port of_device_is_big_endian from linux ...

|commit 37786c7
|Author: Kevin Cernekee <cernekee@gmail.com>
|Date:   Thu Apr 9 13:05:14 2015 -0700
|
|    of: Add helper function to check MMIO register endianness
|
|    SoC peripherals can come in several different flavors:
|
|     - little-endian: registers always need to be accessed in LE mode (so the
|       kernel should perform a swap if the CPU is running BE)
|
|     - big-endian: registers always need to be accessed in BE mode (so the
|       kernel should perform a swap if the CPU is running LE)
|
|     - native-endian: the bus will automatically swap accesses, so the kernel
|       should never swap
|
|    Introduce a function that checks an OF device node to see whether it
|    contains a "big-endian" or "native-endian" property.  For the former case,
|    always return true.  For the latter case, return true iff the kernel was
|    built for BE (implying that the BE MMIO accessors do not perform a swap).
|    Otherwise return false, assuming LE registers.
|
|    LE registers are assumed by default because most existing drivers (libahci,
|    serial8250, usb) always use readl/writel in the absence of instructions
|    to the contrary, so that will be our fallback.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: gadget: autostart: properly release f_multi_opts ...

the same as for usb gadget autostarter.

|commit 2b9bcff
|Author: Sascha Hauer <s.hauer@pengutronix.de>
|Date:   Fri Jan 20 10:03:45 2017 +0100
|
|    usb: gadget: properly release f_multi_opts
|
|    The usbgadget commands uses statically allocated f_multi_opts and passes
|    this to usb_multi_register(). These f_multi_opts are of course no
|    longer valid when we leave the usbgadget command. Luckily we do not use
|    the data after we left the usbgadget command, so this never has been a
|    problem. However, f_multi_opts has some allocated members which we can
|    not free anymore on gadget unregistration because we no longer have the
|    pointer to them.
|
|    Fix this by adding a release function to struct f_multi_opts. This way
|    we can allocate all memory dynamically and properly free it when not
|    used anymore.
|
|    Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Phy: Check NULL bus case and undetected phy via of ...

From 5e87dc2 Mon Sep 17 00:00:00 2001
From: Clement Leger <clement.leger@kalray.eu>
Date: Tue, 5 Sep 2017 10:37:23 +0200
Subject: [PATCH] Phy: Check NULL bus case and undetected phy via of

phy_device_connect can be called with NULL miibus for automatic match
with the phy described in the device tree. In the case where the phy
was not detected for some unknown reason, the next calls will be done
with a NULL bus. This will lead to undefined behavior and more probably
crashes.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: nand: nand_mxs: Don't call get/set features on chips which do not support it ...

Older versions of the ONFI spec do not support get/set features, so
do not call these commands when they are not available.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: nand: Only call ONFI get/set features on supported chips ...

Older versions of the ONFI spec do not support get/set features, so
do not call these commands when they are not available.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

gpio: clps711x: clps711x_gpio_dt_ids: add missing sentinel entry ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

at91_udc: add DT support ...

Based on the linux kernel version of the same driver.
Needs to adjust clock names as the clock names used in the device tree
does not match the clocknames used in platform_data.
The clocknames in the device tree are not unique, so it was
not an option to rename the clocks.

It boots and the driver is discovered - no further testing done.

$ devinfo fff78000.gadget
Resources:
  num: 0
  name: /ahb/apb/gadget@fff78000
  start: 0xfff78000
  size: 0x00004000
Driver: at91_udc
Bus: platform
Parameters:
  vbus: 1 (type: bool)
Device node: /ahb/apb/gadget@fff78000
gadget@fff78000 {
        compatible = "atmel,at91sam9263-udc";
        reg = <0xfff78000 0x4000>;
        interrupts = <0x18 0x4 0x2>;
        clocks = <0x26 0x27>;
        clock-names = "pclk", "hclk";
        status = "okay";
        atmel,vbus-gpio = <0x28 0x19 0x0>;
};

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

atmel_lcdfb: add DT support ...

Some boards use "have_intensity_bit". To support this the
syntax for lcd_wiring_mode was extended to include this info.
This is an extension compared to the documented bindings,
and an extension the kernel does not support (yet).

The binding documents that there can be more than one gpio to
power on/off the display but current implmentation supports only
one gpio. There are no users that requires more than one gpio
so this is good enough.

The clk name used for hclk differs from device trees and
platform data. We could rename the clocl used in platform data
but the name "hclk" is not unique.

Configure clockname based on configuration method.
Devicetree => hclk
Platform data => hck1

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

atmel_lcdfb: move pdata init to a separate function ...

Keep atmel_lcdc_register() readable by separating out
pdata handling in a helper function

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

atmel_lcdfb: define power_control gpio in platform_data ...

Simplify board specific code by specifying the power_control
gpio direct in platform data.
Move registration of the GPIO to the driver so we no longer
need to duplicate this for each board.

As an intended side-effect there is no longer
any references to platform_data outside atmel_lcdc_register()
so remove it from struct atmel_lcdfb_info

The implementation assumes that GPIO=0 is the same as no power control.
This prevents us from using any GPIO=0 for power control,
but this is not considered a problem for current users.
Future DT users will not have this limitation.

This commit include a fix so we will actually power
down if requested. Previously this was hardcoded to ON.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

atmel_lcdfb: move lcd_wiring_mode, have_intensity_bit to local data ...

Copy lcd_wiring_mode and have_intensity_bit to
atmel_lcdfb_info to minimize dependency on the
atmel_lcdfb_platform_data.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

atmel_lcdfb: move dmacon, lcdcon2 to local data ...

Copy dmacon + lcdcon2 to atmel_lcdfb_info to minimize
dependency on the atmel_lcdfb_platform_data.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

phy: don't crash if we have no parent ...

current code will crash if DT has no PHY entry. With this patch
we will test if parent exist, before testing the parent device node.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: nand-mxs: improve error messages ...

This commit adds the return value of the failing function to one message
and makes the other unique.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>