clk: i.MX7: setup ethernet clocks ...

Reparent ethernet clocks so that they can be used by the
fec driver. The values are the same as U-Boot uses.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: i.MX7: do not register PLL bypass clocks as separate clocks ...

In the Kernel the bypass bits in the PLLs are now registered as
separate clocks and are no longer handled in the PLL code. In
barebox we haven't made this step and there currently seems to
be no reason to do so.
This means that the bypass bits are currently modified in both
the PLL driver and in the separate clocks which does not work
properly. Drop all the bypass clocks to let the bypass bits
be handled in the PLL driver exclusively.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: i.MX7: Fix ethernet clocks ...

The original clock code from Linux registers some gates at
base + 0x44e0, 0x44f0, 0x4500, 0x4510. These are not in the reference
manual and do not seem to have any effect on the hardware. The
reference manual lists clocks at 0x4700 and 0x4710 which Linux
does not control at all. These clocks really do have an effect on
the hardware and are needed for ethernet support. Register the
existing clocks rather than the made up clocks to support
ethernet.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: i.MX7: do clock reparenting when all clocks are initialized ...

By the time the i.MX7 clock driver probes the fixed clocks which
are the roots of the clock tree are not yet present, so reparenting
especially to one of the fixed clocks does not work. Move the
tree setup to a later initcall when the fixed clocks are there.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: i.MX7: Add missing USB clocks ...

The USB clocks are missing in the Kernel clock code. Add them here.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: i.MX: Add clock support for i.MX7 ...

Signed-off-by Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>