The RATP implementation now allows executing generic commands with a
binary interface: binary requests are received and binary responses
are returned.

Each command can define its own RATP request contents (e.g. to specify
command-specific options) as well as its own RATP response contents
(if any data is to be returned).

Each command is associated with a pair of numeric unique request and
response IDs, and for easy reference these IDs are maintained in the
common ratp_bb header. Modules may override generic implemented
commands or include their own new ones (as long as the numeric IDs
introduced are unique).

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Since patch e92abad36307d the linker discards sections which seems not
used to make the image smaller.
But this change will discard the whole init and exception code from start.S
which renders the final image useless.

From 'barebox.map' without this patch:

Discarded input sections
 .text          0x0000000000000000     0x358c arch/ppc/mach-mpc5xxx/start.o
 .data          0x0000000000000000        0x0 arch/ppc/mach-mpc5xxx/start.o
 .bss           0x0000000000000000        0x0 arch/ppc/mach-mpc5xxx/start.o
 .got2          0x0000000000000000       0x24 arch/ppc/mach-mpc5xxx/start.o
[...]

So, define the entry point to mark the init and exception used.

From 'barebox.map' with this patch applied:

Discarded input sections
 .data          0x0000000000000000        0x0 arch/ppc/mach-mpc5xxx/start.o
 .bss           0x0000000000000000        0x0 arch/ppc/mach-mpc5xxx/start.o
[...]

Note: tested on MPC5200 at run time, for MPC85XX compile time only

Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

exitcall infrastructure is based on initcall infrastructure.
It allows to have and use exit call hooks on barebox shutdown.

Signed-off-by: Herve Codina <Herve.CODINA@celad.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Memory regions on MPC85xx boards are incorrectly defined leading to
corruption when running memory tests. This patch updates the memory
layout of MPC85xx boards so that critical memory regions can be
correctly reserved during the memory test.

Tested on the P2020RDB and DA923RC.

Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The linker script and start up code are updated so that the bss
section is located above the barebox binary in memory. This removes
the reliance on a hard-coded value.

Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Updates to use a common linker script for all mpc85xx boards,
avoiding duplication.

Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>