LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / arch / arm / mach-at91 / Kconfig

2020-04-29	78b4342 Browse files » treewide: Kconfig: remove some unused symbols ... All these symbols are defined, but unused anywhere in the barebox tree. Remove them. Signed-off-by: Ahmad Fatoum <ahmad@a3f.at> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ahmad Fatoum authored on 28 Apr 2020 Sascha Hauer committed on 29 Apr 2020
2020-04-29	eaa6fbb Browse files » ARM: at91: remove undefined Kconfig symbol ... Symbol used to exist, but was replaced by DEBUG_AT91_UART_BASE in common/Kconfig. Remove last trace of it. Signed-off-by: Ahmad Fatoum <ahmad@a3f.at> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ahmad Fatoum authored on 28 Apr 2020 Sascha Hauer committed on 29 Apr 2020
2020-04-15	18afc26 Browse files » clk: at91: port Linux v5.6 SAM9X60 (new ARM926EJ-S) clock support ... During a bug hunt that ultimately turned out unrelated to the state of the barebox at91 clk driver, I synchronized its state with Linux v5.6. Bug fixes and clean up to minimize the diff were split out in separate prior commits. This last commit imports the rest, which is basically support for Microchip's new ARM926EJ-S SoC, the SAM9x60. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ahmad Fatoum authored on 13 Apr 2020 Sascha Hauer committed on 15 Apr 2020
2020-04-15	47475fa Browse files » clk: at91: add sama5d2 audio PLL support ... Commit 7310b976 ("clk: at91: fix compilation errors in sama5d2.c") and follow-up commit ca3077068c ("clk: at91: delete dead i2s/audio code") had deleted the i2s/audio clock related parts of the upstream driver. This was mostly due to unwillingness on my part to understand the code enough for porting them and because I deemed them unnecessary to support in barebox. The former has changed and the latter is not totally true as audio PLL derived clocks may be muxed as inputs for programmable and generated clocks. Port them over and mimize the diff to upstream. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ahmad Fatoum authored on 13 Apr 2020 Sascha Hauer committed on 15 Apr 2020
2020-03-18	34201fc Browse files » ARM: at91: add sama5d27-based Groboards Giant Board support ... The Groboards Giant Board is a ATSAMA5D27C-D1G SiP-based SBC. The board features a 500MHz ARM Cortex-A5 and 128MB DDR2 SDRAM in the SiP as well as a MicroSD slot on the PCB. barebox doesn't yet support the sama5d2 SDHCI-variant, so board support is limited to toggling the LED and interfacing with the UART, but add this now till the rest may follow. Device tree is based on the vendor's device-tree available at https://github.com/Groboards/giantboard-tools Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ahmad Fatoum authored on 10 Mar 2020 Sascha Hauer committed on 18 Mar 2020
2020-03-18	fd5b602 Browse files » ARM: at91: add support for SAM9 SoC reset ... System reset wasn't supported on the sama5 so far. Add a driver to remedy this. Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ahmad Fatoum authored on 10 Mar 2020 Sascha Hauer committed on 18 Mar 2020
2019-12-02	a17d92b Browse files » pinctrl: at91pio4: move to correct location in Kconfig ... The driver also depends on PINCTRL, so we should only allow it to be enabled if this option is selected. We can also drop the OFDEVICE dependency then, as this is required for PINCTRL. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 29 Nov 2019 Sascha Hauer committed on 2 Dec 2019
2019-10-18	d401d02 Browse files » ARM: at91: build for all SoCs when AT91_MULTI_BOARDS is selected ... This reverts a hunk I missed after a rebase: A previous commit restricts ARCH_BAREBOX_MAX_BARE_INIT to only non-multi-image boards, so no need to touch it to be compatible with the new multi-image changes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ahmad Fatoum authored on 15 Oct 2019 Sascha Hauer committed on 18 Oct 2019
2019-10-14	8bfb185 Browse files » ARM: at91: add basic sama5d2-som1-ek1 support ... The ATSAMA5D27-SOM1-EK1 is Microchip's evaluation kit for the SAMA5D2 System in Packages (SiPs). The ATSAMA5D27C-D1G-CU SIP embeds 128 MB of DDR2 DRAM and the SoM has a PMIC, QSPI flash and a 100Mbps PHY. barebox already supports the sama5d2 clocks, GPIO/Pinctrl, QSPI controller and Ethernet MAC. Most notable omission is the sama5d2 variant of the SDHCI, which differs from the MCI used by previous AT91 boards, but we kernel boot over the network works, so lets add the board now and have the SDHCI follow later. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ahmad Fatoum authored on 14 Oct 2019 Sascha Hauer committed on 14 Oct 2019
	0b149ef Browse files » ARM: at91: add basic sama5d2 support ... Add hardware description, chip identification and clock changes to support the sama5d2 SoC. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ahmad Fatoum authored on 14 Oct 2019 Sascha Hauer committed on 14 Oct 2019
	1c91b2b Browse files » ARM: at91: use compressed DTB for AT91_MULTI_BOARDS ... To offset the size increase by using multi-image have the DTBs be compressed. This reduces e.g. the microchip_ksz9477_evb_defconfig by about 22K from 244K to 222K. This will also come in handy when implementing first stage support later on. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ahmad Fatoum authored on 14 Oct 2019 Sascha Hauer committed on 14 Oct 2019
	6e56ecb Browse files » ARM: at91: build for all SoCs when AT91_MULTI_BOARDS is selected ... With the addition of 15afd9d25 ("ARM: at91: Add initial support for the EVB-KSZ9477 eval board"), we now have two multi-image capable boards supported, but users still have to choose a specific SoC, so they can't be selected at the same time. Fix this, by restricting the menu to the non-multi-image configurations, i.e. CONFIG_ARCH_* symbols become specific to non-multi-image. The multi-image configurations on the other hand directly select the CONFIG_SOC_* symbol they require. Existing CONFIG_ARCH_* usage is adjusted to align with the new usage. Eventually, we would want to have a at91_multi_defconfig along with this, but for now leave existing configs as is. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ahmad Fatoum authored on 14 Oct 2019 Sascha Hauer committed on 14 Oct 2019
	97f1992 Browse files » ARM: at91: don't define ARCH_BAREBOX_MAX_BARE_INIT_SIZE for multi-image ... Since ed04a7c3 ("pbl multiimage: Allow to check image sizes"), we can now check sizes per entry point, so no need to a Kconfig symbol that applies to all boards for that. Thus drop the Kconfig symbol for multi-image, so per-entry-point max image sizes can follow in future. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ahmad Fatoum authored on 14 Oct 2019 Sascha Hauer committed on 14 Oct 2019
	3042dd2 Browse files » pinctrl: add gpio and pinctrl driver for sama5d2 PIO4 ... The sama5d2 features a GPIO and pin controller different than the one we support in barebox. The device tree bindings are different as well, so it makes sense to have a separate driver for it. Add the pin control and GPIO driver as well as some helpers usable from PBL, should we want to do pinmuxing that early. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ahmad Fatoum authored on 26 Sep 2019 Sascha Hauer committed on 14 Oct 2019
2019-05-27	dc5ec88 Browse files » ARM: at91: debug_ll: make UART base address configurable ... This is in line with other platforms such as i.MX, which allow specifying a debug port. As we can't use port indices because the UARTs aren't mapped consecutively, allow specifying a hex base at configuration time. A side effect of this patch is that sama5d4's HAVE_AT91_DBGU2 is now honored as well. Previously anything besides DBGU0 defaulted to DBGU1. Fixes: 06a0773ee31 ("ARM: at91: add sama5d4 soc support #2") Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: Sam Ravnborg <sam@ravnborg.org> [afa: moved base address defaults to common/Kconfig] Signed-off-by: Ahmad Fatoum <afa@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ahmad Fatoum authored on 23 May 2019 Sascha Hauer committed on 27 May 2019
2019-02-25	af5383e Browse files » clk: at91: update to PMC bindings ... Based on kernel 5.0-rc6 update at91 clk support to match the new PMC bindings. Manually added all changes done in the kernel from 4.9-rc3 to 5.0-rc6. New drivers required was added as seperate commits. This includes dt-compat code required to support at91sam5d3, as this is not yet ported to use the new PMC bindings. clk-programmable saw some extra changes - it had never been bulit. It is used only by at91sama5d2 - and barebox has no board support for this cpu (yet). The CONFIG_SOC symbols is used to select the relevant drivers. CONFIG_SOC_SAM9 selects several drivers, and in the future this can be split to keep the image size down. In the kernel CLK_OF_DECLARE_DRIVER() can be used for a two step init. In barebox this is a simple one step init. It was added to have less differences between the kernel and the barebox versions of the drivers. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sam Ravnborg authored on 24 Feb 2019 Sascha Hauer committed on 25 Feb 2019
2019-02-25	94ece8c Browse files » arm: at91: add SOC_SAMA5{D2,D3,D4} ... This split allows us to distingush between the SOC types. The SOC symbols will be used in following patches. SOC_SAMA5D2 is essential unused for now,, and only added to prepare for future use Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sam Ravnborg authored on 24 Feb 2019 Sascha Hauer committed on 25 Feb 2019
2018-12-07	9274aa9 Browse files » ARM: at91: add architecture dependecy to KSZ9477_EVB board ... This board is part of the SAMA5D3 architecture. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 6 Dec 2018 Sascha Hauer committed on 7 Dec 2018
2018-11-06	a698137 Browse files » ARM: at91: separate restart handler registration into SoC specific code ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Nov 2018
2018-11-05	15afd9d Browse files » ARM: at91: Add initial support for the EVB-KSZ9477 eval board ... The EVB-KSZ9477 is an evaluation board for the KSZ9477 ethernet switch. This board is equipped with a atsama5d3 SoC with 256MiB of SDRAM, 256MiB of NAND flash and a SD card slot. For now only second stage booting is supported with AT91bootstrap as first stage loader. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ahmad Fatoum authored on 30 Oct 2018 Sascha Hauer committed on 5 Nov 2018
2018-01-17	b467c26 Browse files » at91sam9263ek: enable DT support ... Add at91sam9263ek.dts to build. Include mmc1 in at91sam9263ek.dts, as mmc1 is what the evaluation kit uses for the SD card. Add DT specific of_init Adjust build to drop non-DT files from mach-at91 RomBOOT >AT91Bootstrap 3.0.1 patch-0.8 64MB Ram Load from SD-Card Loading from SD-Card Open: u-boot.bin Loading from SD-Card - Success barebox 2017.12.0-00036-gda46de29e #23 Sun Dec 31 09:15:39 CET 2017 Board: Atmel at91sam9263ek gpio-at91 fffff200.gpio: AT91 gpio driver registered gpio-at91 fffff400.gpio: AT91 gpio driver registered gpio-at91 fffff600.gpio: AT91 gpio driver registered gpio-at91 fffff800.gpio: AT91 gpio driver registered gpio-at91 fffffa00.gpio: AT91 gpio driver registered pinctrl-at91 pinctrl.2: AT91 pinctrl registered AT91: Detected soc type: at91sam9263 AT91: Detected soc subtype: Unknown mdio_bus: miibus0: probed macb fffbc000.ethernet: Cadence MACB at 0xfffbc000 at91_udc fff78000.gadget: at91_udc version 3 May 2006 atmel_mci fff80000.mmc: version: 0x210 atmel_mci fff80000.mmc: registered as fff80000.mmc atmel_mci fff84000.mmc: version: 0x210 atmel_mci fff84000.mmc: registered as fff84000.mmc malloc space: 0x239fab00 -> 0x23dfaaff (size 4 MiB) barebox-environment environment.6: probe failed: No such device environment load /dev/env0: No such file or directory Maybe you have to create the partition. running /env/bin/init... \e[?25h Hit any key to stop autoboot: 3 barebox@Atmel at91sam9263ek:/ iomem 0x00000000 - 0xffffffff (size 0x00000000) iomem 0x00300000 - 0x00313fff (size 0x00014000) 300000.sram 0x00500000 - 0x00503fff (size 0x00004000) 500000.sram 0x00700000 - 0x00700fff (size 0x00001000) 700000.fb 0x20000000 - 0x23ffffff (size 0x04000000) ram0 0x239fab00 - 0x23dfaaff (size 0x00400000) malloc space 0x23dfab00 - 0x23dfffe2 (size 0x000054e3) board data 0x23e00000 - 0x23e53cc8 (size 0x00053cc9) barebox 0x23e53cc9 - 0x23e6404f (size 0x00010387) barebox data 0x23e64050 - 0x23e6754b (size 0x000034fc) bss 0x23fe4000 - 0x23fe7fff (size 0x00004000) ttb 0x23fe8000 - 0x23feffff (size 0x00008000) stack 0xfff78000 - 0xfff7bfff (size 0x00004000) fff78000.gadget 0xfff80000 - 0xfff805ff (size 0x00000600) fff80000.mmc 0xfff84000 - 0xfff845ff (size 0x00000600) fff84000.mmc 0xfff8c000 - 0xfff8c1ff (size 0x00000200) fff8c000.serial 0xfffbc000 - 0xfffbc0ff (size 0x00000100) fffbc000.ethernet 0xffffee00 - 0xffffefff (size 0x00000200) ffffee00.serial 0xfffff200 - 0xfffff3ff (size 0x00000200) fffff200.gpio 0xfffff400 - 0xfffff5ff (size 0x00000200) fffff400.gpio 0xfffff600 - 0xfffff7ff (size 0x00000200) fffff600.gpio 0xfffff800 - 0xfffff9ff (size 0x00000200) fffff800.gpio 0xfffffa00 - 0xfffffbff (size 0x00000200) fffffa00.gpio 0xfffffd30 - 0xfffffd3e (size 0x0000000f) fffffd30.timer barebox@Atmel at91sam9263ek:/ devinfo `-- global `-- nv `-- platform `-- mem0 `-- 0x00000000-0x03ffffff ( 64 MiB): /dev/ram0 `-- 300000.sram `-- 0x00000000-0x00013fff ( 80 KiB): /dev/sram0 `-- 500000.sram `-- 0x00000000-0x00003fff ( 16 KiB): /dev/sram1 `-- ahb.0 `-- apb.1 `-- fffff000.interrupt-controller `-- fffffc00.pmc `-- ffffe200.ramc `-- ffffe400.smc `-- ffffe800.ramc `-- ffffea00.smc `-- ffffec00.matrix `-- fffffd30.timer `-- fff7c000.timer `-- fffffd00.rstc `-- fffffd10.shdwc `-- pinctrl.2 `-- fffff200.gpio `-- fffff400.gpio `-- fffff600.gpio `-- fffff800.gpio `-- fffffa00.gpio `-- ffffee00.serial `-- cs0 `-- 0x00000000-0xffffffffffffffff ( 0 Bytes): /dev/cs0 `-- fff8c000.serial `-- cs1 `-- 0x00000000-0xffffffffffffffff ( 0 Bytes): /dev/cs1 `-- fffbc000.ethernet `-- miibus0 `-- eth0 `-- fff78000.gadget `-- usbgadget `-- fff80000.mmc `-- mci0 `-- fff84000.mmc `-- mci1 `-- fffffd40.watchdog `-- fffa4000.spi `-- fffac000.can `-- 700000.fb `-- a00000.ohci `-- 10000000.ebi `-- i2c-gpio-0.3 `-- leds.4 `-- gpio_keys.5 `-- cs2 `-- 0x00000000-0xffffffffffffffff ( 0 Bytes): /dev/cs2 `-- soc `-- mem1 `-- 0x00000000-0xfffffffe ( 4 GiB): /dev/mem `-- environment.6 `-- mdio_bus `-- fs `-- ramfs0 `-- devfs0 `-- net `-- udc0 `-- fb0 `-- 0x00000000-0x000257ff ( 150 KiB): /dev/fb0 barebox@Atmel at91sam9263ek:/ drvinfo Driver Device(s) -------------------- syscon at91-pit fffffd30.timer gpio-at91 fffff200.gpio fffff400.gpio fffff600.gpio fffff800.gpio fffffa00.gpio pinctrl-at91 pinctrl.2 atmel_usart ffffee00.serial fff8c000.serial ramfs ramfs0 devfs devfs0 fat tftp at91sam9-smc Generic PHY macb fffbc000.ethernet atmel_nand cfi_flash at91_udc fff78000.gadget atmel_mci fff80000.mmc fff84000.mmc atmel_lcdfb 700000.fb gpio-leds leds.4 gpio_keys gpio_keys.5 mmio-sram 300000.sram 500000.sram mem mem0 mem1 barebox-environment Use 'devinfo DEVICE' for more information barebox@Atmel at91sam9263ek:/ gpioinfo GPIOs 0-31, chip fffff200.gpio: dir val requested label GPIO 0: unk hi false GPIO 1: unk hi false GPIO 2: in hi false GPIO 3: unk hi false GPIO 4: unk hi false GPIO 5: unk hi false GPIO 6: unk lo false GPIO 7: unk hi false GPIO 8: unk hi false GPIO 9: unk hi false GPIO 10: unk hi false GPIO 11: unk hi false GPIO 12: unk hi false GPIO 13: in hi false GPIO 14: in hi false GPIO 15: in hi false GPIO 16: in hi false GPIO 17: in hi false GPIO 18: in hi false GPIO 19: in lo false GPIO 20: in hi false GPIO 21: in hi false GPIO 22: in hi false GPIO 23: in hi false GPIO 24: in hi false GPIO 25: in lo true udc_vbus GPIO 26: unk hi false GPIO 27: unk hi false GPIO 28: unk hi false GPIO 29: unk hi false GPIO 30: in lo false GPIO 31: in hi false GPIOs 32-63, chip fffff400.gpio: dir val requested label GPIO 32: in hi false GPIO 33: in hi false GPIO 34: in hi false GPIO 35: in hi false GPIO 36: in hi false GPIO 37: in hi false GPIO 38: in hi false GPIO 39: out hi true d3 GPIO 40: in hi false GPIO 41: unk hi false GPIO 42: in hi false GPIO 43: in hi false GPIO 44: in hi false GPIO 45: in hi false GPIO 46: in hi false GPIO 47: in hi false GPIO 48: in hi false GPIO 49: in hi false GPIO 50: in hi false GPIO 51: in hi false GPIO 52: in hi false GPIO 53: in hi false GPIO 54: in hi false GPIO 55: in hi false GPIO 56: in hi false GPIO 57: in hi false GPIO 58: in hi false GPIO 59: out lo active low PHY 50 MHz oscillator GPIO 60: in hi false GPIO 61: in hi false GPIO 62: in hi false GPIO 63: in hi false GPIOs 64-95, chip fffff600.gpio: dir val requested label GPIO 64: in hi false GPIO 65: unk hi false GPIO 66: unk hi false GPIO 67: unk hi false GPIO 68: in hi true gpio_keys GPIO 69: in hi true gpio_keys GPIO 70: unk lo false GPIO 71: unk lo false GPIO 72: unk lo false GPIO 73: unk lo false GPIO 74: unk lo false GPIO 75: unk lo false GPIO 76: unk lo false GPIO 77: in hi false GPIO 78: unk lo false GPIO 79: unk lo false GPIO 80: unk lo false GPIO 81: unk lo false GPIO 82: unk lo false GPIO 83: unk lo false GPIO 84: in hi false GPIO 85: in hi false GPIO 86: unk lo false GPIO 87: unk lo false GPIO 88: unk lo false GPIO 89: unk lo false GPIO 90: unk lo false GPIO 91: unk lo false GPIO 92: in hi false GPIO 93: in hi true d2 GPIO 94: unk hi false GPIO 95: unk hi false GPIOs 96-127, chip fffff800.gpio: dir val requested label GPIO 96: in hi false GPIO 97: in hi false GPIO 98: in hi false GPIO 99: in hi false GPIO 100: in hi false GPIO 101: in hi false GPIO 102: in hi false GPIO 103: in hi false GPIO 104: in hi false GPIO 105: in hi false GPIO 106: in hi false GPIO 107: in hi false GPIO 108: unk lo false GPIO 109: unk lo false GPIO 110: unk lo false GPIO 111: in hi false GPIO 112: unk lo false GPIO 113: unk hi false GPIO 114: unk hi false GPIO 115: unk lo false GPIO 116: unk hi false GPIO 117: unk hi false GPIO 118: unk hi false GPIO 119: unk hi false GPIO 120: unk lo false GPIO 121: unk hi false GPIO 122: unk hi false GPIO 123: unk lo false GPIO 124: unk hi false GPIO 125: unk hi false GPIO 126: unk hi false GPIO 127: unk hi false GPIOs 128-159, chip fffffa00.gpio: dir val requested label GPIO 128: in hi false GPIO 129: in hi false GPIO 130: in hi false GPIO 131: in hi false GPIO 132: in hi false GPIO 133: in hi false GPIO 134: in hi false GPIO 135: in hi false GPIO 136: in hi false GPIO 137: in hi false GPIO 138: in hi false GPIO 139: in hi false GPIO 140: in hi false GPIO 141: in hi false GPIO 142: in hi false GPIO 143: in hi false GPIO 144: in hi false GPIO 145: in hi false GPIO 146: in lo true mci_cd GPIO 147: in hi false GPIO 148: in hi false GPIO 149: unk lo false GPIO 150: in hi false GPIO 151: unk lo false GPIO 152: unk lo false GPIO 153: unk lo false GPIO 154: unk lo false GPIO 155: unk lo false GPIO 156: unk lo false GPIO 157: unk lo false GPIO 158: unk hi false GPIO 159: in hi false barebox@Atmel at91sam9263ek:/ clk_dump slow_xtal (rate 32768, enabled) prog0 (rate 32768, enabled) pck0 (rate 32768, disabled) prog1 (rate 32768, enabled) pck1 (rate 32768, disabled) prog2 (rate 32768, enabled) pck2 (rate 32768, disabled) prog3 (rate 32768, enabled) pck3 (rate 32768, disabled) main_xtal (rate 16367660, enabled) main_osc (rate 16367660, enabled) mainck (rate 16367660, enabled) pllbck (rate 98205960, enabled) usbck (rate 49102980, enabled) uhpck (rate 49102980, disabled) udpck (rate 49102980, disabled) pllack (rate 204595750, enabled) masterck (rate 102297875, enabled) pioA_clk (rate 102297875, enabled) pioB_clk (rate 102297875, enabled) pioCDE_clk (rate 102297875, enabled) usart0_clk (rate 102297875, enabled) usart1_clk (rate 102297875, disabled) usart2_clk (rate 102297875, disabled) mci0_clk (rate 102297875, disabled) mci1_clk (rate 102297875, disabled) can_clk (rate 102297875, disabled) twi0_clk (rate 102297875, disabled) spi0_clk (rate 102297875, disabled) spi1_clk (rate 102297875, disabled) ssc0_clk (rate 102297875, disabled) ssc1_clk (rate 102297875, disabled) ac97_clk (rate 102297875, disabled) tcb_clk (rate 102297875, disabled) pwm_clk (rate 102297875, disabled) macb0_clk (rate 102297875, enabled) g2de_clk (rate 102297875, disabled) udc_clk (rate 102297875, disabled) isi_clk (rate 102297875, disabled) lcd_clk (rate 102297875, enabled) dma_clk (rate 102297875, disabled) ohci_clk (rate 102297875, disabled) barebox@Atmel at91sam9263ek:/ led registered LEDs: 0 : name: d3 max_value: 1 1 : name: d2 max_value: 1 barebox@Atmel at91sam9263ek:/ led 1 1 barebox@Atmel at91sam9263ek:/ led 0 1 Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sam Ravnborg authored on 15 Jan 2018 Sascha Hauer committed on 17 Jan 2018
2018-01-09	c06a302 Browse files » arm: at91: remove leftovers from moving reset code in mach-at91 ... Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sam Ravnborg authored on 6 Jan 2018 Sascha Hauer committed on 9 Jan 2018
	120a41b Browse files » at91rm9200ek: move reset vector to board code ... Include deletion of now unused at91rm9200_lowlevel_init.c and related CONFIG symbols Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sam Ravnborg authored on 6 Jan 2018 Sascha Hauer committed on 9 Jan 2018
	38d0b23 Browse files » dss11: move reset vector to board code ... Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sam Ravnborg authored on 6 Jan 2018 Sascha Hauer committed on 9 Jan 2018
	d9037ec Browse files » telit-evk-pro3: move reset vector to board code ... Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sam Ravnborg authored on 6 Jan 2018 Sascha Hauer committed on 9 Jan 2018
	7583199 Browse files » animeo: move reset vector to board code ... Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sam Ravnborg authored on 6 Jan 2018 Sascha Hauer committed on 9 Jan 2018
	fc4555c Browse files » at91sam9m10g45ek, at91sam9m10ihd, pm9g45: move reset vector to board code ... These three board share the same at91sam9g45_lowlevel_init.c file. Introduce lowlevel.c file for the boards that contains the reset vector. Delete the now unused at91sam9g45_lowlevel_init.c file Drop unused CONFIG symbols and Makefile references Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sam Ravnborg authored on 6 Jan 2018 Sascha Hauer committed on 9 Jan 2018
	73851fc Browse files » at91sam9260ek, at91sam9g20ek: move reset vector to board code ... Create new lowlevel.c that contains the reset vector. Drop unused CONFIG symbols Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sam Ravnborg authored on 6 Jan 2018 Sascha Hauer committed on 9 Jan 2018
	709559b Browse files » at91sam9n12ek: move reset vector to board code ... Delete the unused at91sam9n12_lowlevel_init.c Create new lowlevel.c that contains the reset vector. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sam Ravnborg authored on 6 Jan 2018 Sascha Hauer committed on 9 Jan 2018
	3b7de0a Browse files » sama5d{3, 4}{xek, xplained}: move reset vector to board code ... Include deletion of now unused CONFIG symbols Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sam Ravnborg authored on 6 Jan 2018 Sascha Hauer committed on 9 Jan 2018