i2c: sync i2c_parse_fw_timings() with upstream ...

Upstream now has support for i2c-digital-filter-width-ns and
i2c-analog-filter-cutoff-frequency device tree properties, that are
used in an upcoming patch.
Prepare for it by syncing with Linux v5.8-rc4.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/watchdog'

Merge branch 'for-next/tlsf'

Merge branch 'for-next/ramfs'

Merge branch 'for-next/module'

Merge branch 'for-next/misc'

Merge branch 'for-next/kvx'

Merge branch 'for-next/imx'

Merge branch 'for-next/fastboot'

Merge branch 'for-next/elf'

Merge branch 'for-next/dts'

treewide: Convert files covered by ARM copyright to SPDX ...

According to Marc Zyngier, former employee at ARM, the company owns the
copyright for code created by its employees. Convert accordingly to SPDX
with the usual rearrangements. Also dropped Marc's email address which
doesn't work any more.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

include: delete unreferenced u-boot part.h header ...

It's unused, the functions that it declares aren't defined in barebox
and the <ide.h> header it references doesn't exist.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mfd: Add pca9440 register map ...

The pca9440 is a PMIC found on the i.MX8MP-EVK board. This adds the
register map for it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fs: fat: extend for in-PBL support ...

The AT91 BootROM loads a boot.bin file from the first FAT partition
into SRAM, when booting from MMC. To avoid the need for two barebox
configurations for each of the bootloader stages, add PBL support
for reading from FAT. This way each stage need only have a different
PBL entry point.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

pbl: add block I/O API ...

We already have some PBL MCI implementations in barebox, but none
are used for chainloading a barebox from a file system.

There are some SoCs that would benefit from this however:
At least the Zynq, AT91, SoCFPGA and TI SoCs.

In preparation for supporting first stage boot on these where it's
customary for both the BootROM and first stage bootloader to load the
follow-up stage from FAT, add a very basic block I/O API that MCI
drivers can implement.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Revert "of: Add of_property_for_each_phandle() iterator" ...

Codebase is meant to be gnu89, but this was only enforced starting
with bc4840e98b94 ("kbuild: add -Wmissing-prototypes and -std=gnu89
to KBUILD_HOSTCFLAGS"). Since then, use of this macro would yield a
compile error, because of the initialization inside the for-loop,
which is a C99 feature. There hasn't been any users for the macro
since it was added in 2016, thus drop it.

This reverts commit d5f9415.

Cc: Trent Piepho <tpiepho@kymetacorp.com>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: phy: add uapi/linux/mdio.h from kernel for MDIO MMD access ...

The headerfile is used in the kernel for access of MDIO Managed Devices
(MMD) indirect access. Some drivers already use those device addresses.
We add the headerfile from the kernel and change the current users to
use the defines instead

Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common: bootm: allow building with an undefined IH_ARCH ...

Some architectures might not want to support uImage. To do so, allow
IH_ARCH to be let undefined which will make it possible to compile boot
support.

Signed-off-by: Clement Leger <cleger@kalray.eu>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

module: Implement HAVE_MOD_ARCH_SPECIFIC ...

Implement HAVE_MOD_ARCH_SPECIFIC Kconfig and module_frob_arch_sections()
function prototype from Linux module subsystem.
module_frob_arch_sections() should be implemented by any architecture
that selects HAVE_MOD_ARCH_SPECIFIC, and is called from load_module()

Signed-off-by: David Dgien <dgienda125@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

module: Add init macros to module.h ...

Port module initialization macros and initcall redefinition macros from
Linux

Signed-off-by: David Dgien <dgienda125@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

startup: Fix do_autoboot_countdown() running multiple times ...

The comment above do_autoboot_countdown() states: "This function can be
called multiple times, it is executed only the first time.". Since
1973892533 ("startup: don't clobber original autoboot state") This is no
longer the case. Bring back the old and documented behaviour.

Fixes: 1973892533 ("startup: don't clobber original autoboot state")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

include: import upstream header <linux/overflow.h> ...

Incoming code makes use of struct_size, which is defined upstream in
<linux/overflow.h>. Import the Linux v5.8-rc1 header as is.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: sync of_clk_get_parent_name with upstream ...

Upstream of_clk_get_parent_name only resorts to node name as a fallback.
Instead, it uses the name supplied for registered clocks whenever
possible. On the sama5d2, this results in sckc@f8048050 and slowck,
respectively. So far, sckc@f8048050 in the parents array couldn't be
matched with any existing clock, leading to an inaccurate clock tree.

Port over the v5.8-rc1 state of the function to fix this.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

startup: inhibit watchdogs on non-interactive autoboot abort ...

nv.autoboot=abort has been added as development aid to have barebox stop
at the shell prompt automatically. It makes sense to inhibit all watchdogs
in this mode, so the user can later use the shell in peace.

This also applies to fastboot aborting the shell prompt. If this
happens, watchdog will be automatically inhibited as well.
Behavior on user aborting the shell prompt via keypad or uart input
remains unchanged for backwards-compatibility.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fastboot: Drop support for downloading to buffer ...

The option to download to a buffer instead of a file was introduced
because in some workloads it is required to have a contiguous image
in memory. With recent changes now ramfs can provide such a buffer
via memmap API even when it downloaded the data to a file. This makes
the explicit download to buffer option unnecessary, so remove it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: phy: port phy_interface_is_rgmii() from kernel ...

and remove duplicates from other drivers

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

update list.h from Linux-5.7 ...

This updates include/linux/list.h from Linux-5.7.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

tlsf: Update to v3.1 ...

This updates the tlsf implementation to v3.1. This is taken from
commit deff9ab in
https://github.com/mattconte/tlsf.git.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common: bootm: add support for elf file loading ...

This will allows elf loader to directly have an elf file available. Thus
filetype_elf bootm handlers will be able to use standard bootm functions
and data.

Signed-off-by: Clement Leger <cleger@kalray.eu>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>