LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / scripts / imx

2020-07-14	0fc1b59 Browse files » scripts: imx-image: throw descriptive error on encountering dcdofs ... With dcdofs renamed to ivtofs, out-of-tree boards will start to fail. Make the migration easier by suggesting what needs to be changed on stderr. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ahmad Fatoum authored on 12 Jul 2020 Sascha Hauer committed on 14 Jul 2020
	e240ea4 Browse files » scripts: imx-image: Add i.MX8MP support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 14 Jul 2020
	2766ff2 Browse files » scripts: imx-image: rename dcdofs to ivtofs ... This renames the dcdofs config option in the imx-image tool to ivtofs. dcdofs is a misnomer. The DCD (Device Configuration Data) is only one part of the data linked into the IVT (Image Vector Table), but the meaning of the option is really the latter, not the former. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 14 Jul 2020
	b8542d0 Browse files » scripts: imx-image: rename image_dcd_offset to image_ivt_offset ... image_dcd_offset is a misnomer, it should really be image_ivt_offset. The DCD (Device Configuration Data) is only one part of the data linked into the IVT (Image Vector Table), but the meaning of the variable is really the latter, not the former. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 14 Jul 2020
	17c7e57 Browse files » scripts: imx-image: Fix writing image with IVT offset = 0 ... When we have written the barebox header the next thing we do is to lseek forward by the size of the header gap. This means our position is already inside of the rest of the image and we have to skip this offset from the rest of the image. This only works when the rest of the image doesn't have anything needed in the first few bytes. Some newer SoCs have the IVT at offset 0 though, so with the current approach we skip writing the IVT. Instead of doing this we should lseek to the end of the header gap. With this we are at the right position to just write the full image containing the IVT. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 14 Jul 2020
	03ecd70 Browse files » scripts: imx-image: exit with error when barebox header conflicts with IVT ... When the IVT is right at the beginning of the image it conflicts with the barebox header. Bail out with an error when this happens. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 14 Jul 2020
	53f2896 Browse files » scripts: imx-image: Add extra code path for i.MX35 ... The i.MX35 writes two copies of the header at the beginning of the image. This is written in a loop right now. Make the i.MX35 an extra code path so that it is out of the way for the changes in the next patches. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 14 Jul 2020
	6bb165d Browse files » scripts: imx-image: exit on read/write failures ... When xread/xwrite fails the caller bails out of the program with an error. We can drop all the error handling by letting xread/xwrite call exit() themselves. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 14 Jul 2020
	7d17643 Browse files » scripts: imx-image: Only set DCD pointer when we have DCD data ... When we do not have any DCD data we can set the pointer to the data to NULL. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 14 Jul 2020
2020-04-27	cd24f63 Browse files » treewide: remove references to CREDITS ... The CREDITS file was removed from barebox in 2015 by commit 6570288f2d97 ("Remove the CREDITS file"). Remove references to it from several files. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Uwe Kleine-König authored on 23 Apr 2020 Sascha Hauer committed on 27 Apr 2020
2020-02-24	b8cb663 Browse files » scripts: imx-usb-loader: Fix i.MX8MM ... Most things valid for the i.MX8MQ are needed for the i.MX8MM as well, so add a common macro which returns true for both SoCs and use it where appropriate. Also we have to search for the i.MX header in a bigger area as it is at offset 33KiB. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 24 Feb 2020
2020-02-19	aa65f08 Browse files » scripts: imx-image: Add i.MX8MM support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 19 Feb 2020
	4fab261 Browse files » scripts: imx-usb-loader: Add i.MX8MM support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 19 Feb 2020
	243c85f Browse files » scripts: imx-usb-loader: Add 2nd stage loading support ... This adds the host part for 2nd stage uploading in case the RAM setup is done in code. This works in conjunction with "usb: gadget: fsl_udc: Add PBL image loading support". Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 19 Feb 2020
2020-02-18	d6787a3 Browse files » Merge branch 'for-next/misc' Sascha Hauer committed on 18 Feb 2020
2020-02-13	688db69 Browse files » scripts: imx-usb-loader: dladdr is unused, remove it ... The download address is the same as the place we put the header to, so we can drop the calculation of dladdr and use header_addr directly. Tested on i.MX51, i.MX53 and i.MX6 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 13 Feb 2020
	02f37e1 Browse files » scripts: imx-usb-loader: download address is always the header address ... We always have to upload the image beginning with the header, we have to skip everything that is before the header. In MODE_BULK this is explicit, but in HID mode this is obfuscated by doing several calculations with helper variables. Drop this and simplify code. Tested on i.MX51, i.MX53 and i.MX6 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 13 Feb 2020
	315174e Browse files » scripts: imx-usb-loader: remove unnecessary check ... file_base is the address where the image would be loaded to if we were not skipping the unused space before the header in the image. I can't see any reason why this should be higher than the download address. Drop this superfluous check. Tested on i.MX51, i.MX53 and i.MX6 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 13 Feb 2020
	087e6f4 Browse files » scripts: imx-usb-loader: Accept new header version ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 13 Feb 2020
2020-02-10	b6b8e9c Browse files » scripts: imx: Remove unused variable ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 10 Feb 2020
2020-01-08	8ebc87e Browse files » habv4: imx change signing area from full to the executed image ... the whole barebox with mbr and partition table were be signed by default. change the signing to the executed image without signing the mbr, partition table and header_gap by imx8mq additional delete option full, from-dcdofs and skip-mbr Signed-off-by: Maik Otto <m.otto@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Maik Otto authored on 7 Jan 2020 Sascha Hauer committed on 8 Jan 2020
2019-12-02	9344bf7 Browse files » scripts: imx: report file where error occurred ... Especially when using #include directives in imxcfg files, error messages can be hard to follow because line numbers differ between preprocessor and source files. Teach the imx image generation tool about preprocessing line number / file name directive, so it can give more useful error messages. Instead of: error in line 11: Invalid argument It now says: $barebox/arch/arm/boards/$som/flash-header-$board.imxcfg:5: Invalid argument No change in compiled barebox binaries. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ahmad Fatoum authored on 28 Nov 2019 Sascha Hauer committed on 2 Dec 2019
2019-08-15	bd1fbce Browse files » Merge branch 'for-next/imx8-hab' Sascha Hauer committed on 15 Aug 2019
2019-08-09	48aae39 Browse files » IMX: do_hab calls strcat on uninitialised memory Rob Stacey committed on 9 Aug 2019
2019-08-07	b1dcb6a Browse files » scripts: imx: support signing for i.MX8MQ ... Implement signing of the PBL for i.MX8MQ. The imagesize is also modified to i.MX8MQ to only contain the PBL. This obsoletes the max_load_size, which is kept for other boards currently using it. Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Rouven Czerwinski authored on 6 Aug 2019 Sascha Hauer committed on 7 Aug 2019
2019-06-11	b697fba Browse files » Merge branch 'for-next/macos' Sascha Hauer committed on 11 Jun 2019
2019-06-07	8ad1ac7 Browse files » scripts: imx-usb-loader: add i.MX8MQ PID and VID ... Add new PID and VID for i.MX8: Bus 001 Device 057: ID 1fc9:012b NXP Semiconductors i.MX 8M Dual/8M QuadLite/8M Quad Serial Downloader Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Rouven Czerwinski authored on 5 Jun 2019 Sascha Hauer committed on 7 Jun 2019
2019-06-07	3f3b1ac Browse files » scripts: imx-image: document -d, -e, -s, -u ... Signed-off-by: Bastian Krause <bst@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Bastian Krause authored on 4 Jun 2019 Sascha Hauer committed on 7 Jun 2019
2019-05-28	799d94d Browse files » scripts: imx-usb-loader: don't depend on unportable headers ... <sys/io.h> is non-standard and even unavailable on some Linux systems, like arm64. Drop it as it's unused anyway. <endian.h> is Linux-specific, so don't include it directly, but let "compiler.h" figure out, whether it should be included. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ahmad Fatoum authored on 27 May 2019 Sascha Hauer committed on 28 May 2019
2019-05-28	caf5b9f Browse files » scripts: use "compiler.h" endianness helpers ... <endian.h> may not exist on other systems, don't include it directly, but include "compiler.h", which either includes it or provides a suitable alternative if possible. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ahmad Fatoum authored on 27 May 2019 Sascha Hauer committed on 28 May 2019