usb: ehci: forward phy given in registration data to host ...

Allow to pass a phy in the registration data and forward it to
the usb_host structure.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: ehci: honour timeout value ...

usb_control_msg() and usb_bulk_msg() have a timeout parameter. Honour
this in the ehci driver instead of using a default timeout.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/misc'

ehci-hcd: preserve DTC in QH for interrupt transactions ...

In Linux ehci-q Data Toggle Control bit for interrupt transactions
is preserved in Queue Head (EHCI 3.6.2). So don't set 14's bit in
qh_endpt1 and don't manage toggle bit anywhere in int transactions.

This fixes an idle issue for USB keyboards, where keys
were physically changed but barebox haven't seen them in polling
until the next USB keyboard polling occurs.

Signed-off-by: Aleksey Kuleshov <rndfax@yandex.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ehci-hcd: remove useless timeout ...

This is just a regular iteration loop so no timeout needed

Signed-off-by: Aleksey Kuleshov <rndfax@yandex.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

driver: replace dev_request_mem_region with dev_request_mem_resource ...

dev_request_mem_region doesn't work properly one some SoCs on which
PTR_ERR() values clash with valid return values from dev_request_mem_region.
Replace them with dev_request_mem_resource where possible.

This patch has been generated with the following semantic patch:

// <smpl>
@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
-if (IS_ERR(io)) {
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores)) {
...
-	return PTR_ERR(io);
-}
+	return PTR_ERR(iores);
+}
+io = IOMEM(iores->start);
...+>
}

@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
-if (IS_ERR(io)) {
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores))
-	return PTR_ERR(io);
-}
+	return PTR_ERR(iores);
+io = IOMEM(iores->start);
...+>
}

@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
-if (IS_ERR(io)) {
-	ret = PTR_ERR(io);
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores)) {
+	ret = PTR_ERR(iores);
...
}
+io = IOMEM(iores->start);
...+>
}

@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores))
+	return PTR_ERR(iores);
+io = IOMEM(iores->start);
...+>
}

@@
identifier func;
@@
func(...) {
<+...
struct resource *iores;
-struct resource *iores;
...+>
}
// </smpl>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: ehci-hcd: Use regular mdelay() ...

The USB core will make sure we do not re-enter the ehci driver, so
we can use regular mdelay instead of mdelay_non_interruptible().

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Revert "usb: ehci-hcd: detect re-entrance" ...

Now that the USB core makes sure that we do not re-enter USB
drivers we no longer have to detect re-entrancy in the ehci driver.

This reverts commit 8426cc6.

Revert "usb: ehci-hcd: use mdelay_non_interruptible()" ...

Now that the USB core makes sure that we do not re-enter USB
drivers we no longer need mdelay_non_interruptible() but can use
regular mdelay() again.

This reverts commit 4cfd909.

usb: ehci-hcd: use mdelay_non_interruptible() ...

Signed-off-by: Peter Mamonov <pmamonov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: ehci-hcd: detect re-entrance ...

Signed-off-by: Peter Mamonov <pmamonov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: ehci-hcd: port periodic transactions implementation from the u-boot ...

Signed-off-by: Peter Mamonov <pmamonov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: ehci-hcd: use is_timeout_non_interruptible() ...

Use is_timeout_non_interruptible() intead of is_timeout()
to avoid re-entering ehci-hcd functions from pollers,
registered by usb drivers.

Signed-off-by: Peter Mamonov <pmamonov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: ehci-hcd: add OF bindings ...

Signed-off-by: Peter Mamonov <pmamonov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: ehci: prevent bad PORTSC register access ...

1. The 'index' of ehci_submit_root() is not always > 0.

   e.g.
   While it gets invoked from usb_get_descriptor(),
   the 'index' is always a '0'. (See ch.9 of USB2.0)

2. The PORTSC register is not always required, and thus it
   should only report a port error when necessary.
   It would cause a port scan failure if the ehci_submit_root()
   always gets terminated by a port error.

Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com>
Signed-off-by: Peter Mamonov <pmamonov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: ehci: replace multiple use of le16_to_cpu(req->index) with variable ...

This is part of U-Boot commit:

7d9aa8f usb: Add new command to set USB 2.0 port test modes

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: ehci-hcd: initialize ehci->qh_list[] with zeros ...

Without this initialization ehci->qh_list[0].qh_endpt2 is left uninitialized,
which causes problems with some EHCI host controllers.

Das u-boot uses the same strategy:

	static int ehci_common_init(struct ehci_ctrl *ctrl, uint tweaks)
	{
		...
		qh_list = &ctrl->qh_list;

		/* Set head of reclaim list */
		memset(qh_list, 0, sizeof(*qh_list));
		qh_list->qh_link = cpu_to_hc32((unsigned long)qh_list | QH_LINK_TYPE_QH);
		qh_list->qh_endpt1 = cpu_to_hc32(QH_ENDPT1_H(1) |
							QH_ENDPT1_EPS(USB_SPEED_HIGH));
		qh_list->qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
		qh_list->qh_overlay.qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
		qh_list->qh_overlay.qt_token =
				cpu_to_hc32(QT_TOKEN_STATUS(QT_TOKEN_STATUS_HALTED));
		...
	}

Signed-off-by: Peter Mamonov <pmamonov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: host: ehci: convert to streaming DMA ops ...

Move to the common streaming DMA ops in order to get rid of
the direct usage of the ARM MMU functions for the cache
maintenance.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: move DMA alloc functions to dma.h ...

This better separates the DMA from the MMU functionality.

Also move all drivers that only depends on asm/mmu.h for the alloc
functions over to the common header.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: change dma_alloc/free_coherent to match other architectures ...

As a lot drivers currently rely on the 1:1 virt->phys mapping on ARM
we define DMA_ADDRESS_BROKEN to mark them. In order to use them on
other architectures with a different mapping they need proper fixing.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: abolish wait_ms() function ...

This function is only used in drivers/usb/*.
It is equivalent to mdelay().

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: host: only activate Efika MX ULPI workaround if ULPI is selected ...

Fixes a build failure with disabled ULPI support.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: ehci-hcd: Correct CLEAR_FEATURE code ...

This commit broke USB on olinuxino board:

  87b9bea USB: host: hub: Use usb_hub_power_on from U-Boot

This patch was ported from U-Boot with small changes. See discussion:
http://lists.denx.de/pipermail/u-boot/2013-May/153920.html

The root cause seems to be a missing mask and missing 'break' in
ehci-hcd.c. Fix both.

Signed-off-by: Dmitry Voytik <voytikd@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

resource: Let dev_request_mem_region return an error pointer ...

For all users fix or add the error check.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

USB: EHCI: use min3 from Linux ...

EHCI HCD has a private version of min3() determining the smallest
number out of 3. We already have min()/max() imported from Linux,
also get min3()/max3() and use it instead of EHCI's private one.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

USB: Use descriptors from ch11.h ...

Use the descriptors from ch11.h instead of duplicating them
in usb.h. usb_hub_descriptor now contains a union .u to differentiate
HS hub descriptor from SS hub descriptor.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

USB: EHCI: use descriptor length fields ...

Instead of hard-coding descriptor length, pick it from the
corresponding descriptor.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

USB: EHCI: make use of defines for descriptors ...

Now that we have a full set of defines for each descriptor field,
make use of it for the EHCI HCD descriptors.

This fixes endianess issues for .device.bcdUSB, .device.bcdDevice,
.config.wTotalLength, and .endpoint.wMaxPacketSize.

Also, .endpoint.bInterval was set to 0 instead of 255 due to a
copy-and-paste error while assigning u8[] to usb_endpoint_descriptor.

This also is a preparation for including ch11.h later, which has
a modified usb_hub_descriptor for USB 3.0.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

USB: EHCI: reuse ch9.h config and interface descriptors ...

Now that usb_config_descriptor and usb_interface_descriptor are clean
of any additional fields, drop the duplication in EHCI code and use
the default ones.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

USB: host: drop force rescan ...

We can now detect changes in the USB device hierarchy properly, so
the 'force' option to the usb command is no longer necessary. We just
scan the busses each time the usb command is called.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>