LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / arch / arm / configs / imx_v7_defconfig

2017-06-07	5f7e0d1 Browse files » ARM: i.MX6: add Technexion Pico Hobbit support ... This adds support for the i.MX6UL Technexion Pico Hobbit. The board comes with different amounts of RAM. We create one image for the 256MB and one for the 512MB variant. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> --- v1 -> v2: - removed already prepared clock setup v2 -> v3: - added phy-reset-post-delay as the support is now available Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Michael Grzeschik authored on 7 Jun 2017 Sascha Hauer committed on 7 Jun 2017
2017-04-24	2c506af Browse files » ARM: i.MX50: Add support for i.MX50 based Amazon Kindle e-book readers ... The Kindle Model No. D01100 (Kindle Wi-Fi), D01200 (Kindle Touch) and EY21 (Kindle Paperwhite) are refered as the Kindle 4th and 5th generation. Those models are based on an i.MX50 SoC and use LPDDR1 or LPDDR2 Memory. The devices boot in internal boot mode from a build-in eMMC, alternatively some devices may be set into USB-downloader mode by pressing a specific key at startup. Add support for the i.MX50 based Kindle device and make barebox a drop-in replacement for the factory shipped u-boot image. Notable features: - Support for eMMC, USB, UART, I2C, SPI and Keys (except keyboard). - LPDDR1 and LPDDR2 setup is done via DCD, the same imximage may be used for USB-startup and for installation. - Support for vendor specific ATAGs that are required for the Kindle-System. - usbserial barebox console access by pressing Select button at startup, alternatively full console support on connector J14. Signed-off-by: Alexander Kurz <akurz@blala.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Kurz authored on 23 Apr 2017 Sascha Hauer committed on 24 Apr 2017
2016-10-12	221d6f5 Browse files » arch: refresh defconfigs ... The defconfig files are long untouched and a make xy_defconfig; make savedefconfig usually generates quite a different looking file. Refresh them to make it easier to generate patches against the configs using make xy_defconfig; make menuconfig; make savedefconfig This has been done with the following script. for a in arch/; do arch=$(basename $a) for c in $a/configs/; do config=$(basename $c) export ARCH=$arch make $config && make savedefconfig && mv defconfig $c done done Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 12 Oct 2016
2016-10-10	440783f Browse files » Merge branch 'for-next/usb' Sascha Hauer committed on 10 Oct 2016
2016-09-29	a44f222 Browse files » usb: imx-us-phy: Convert driver to generic phy support ... The generic phy layer now supports USB phys, so convert the driver over to use it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 29 Sep 2016
2016-09-22	bebe3ac Browse files » ARM: imx_v7_defconfig: Enable Vincell support ... Now that we can start images bigger than internal SRAM size we can enable the Vincell support in the imx_v7_defconfig. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 22 Sep 2016
2016-08-03	0c61905 Browse files » ARM: nitrogen: rename to nitrogen6 ... Now that the MAX variant of the board is also supported by the same code, rename the board directory to the more generic nitrogen6. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 22 Jul 2016 Sascha Hauer committed on 3 Aug 2016
2016-06-27	02ac9fe Browse files » ARM: imx_v7_defconfig: enable LED_GPIO_OF ... GPIO leds are widely used in imx_v7 related dts files. Enable support to parse this data and enable blinking LED by defconfig on e.g. iMX53qsb. Signed-off-by: Alexander Kurz <akurz@blala.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Kurz authored on 26 Jun 2016 Sascha Hauer committed on 27 Jun 2016
2016-05-10	7839011 Browse files » bootm: Move bootm options to common/Kconfig ... bootm has a C API, so the bootm options have to depend on the option providing the bootm code (CONFIG_BOOTM), not on the option providing the command (CONFIG_CMD_BOOTM). Fixing the dependencies makes it possible to fully use bootm from C without enabling the bootm command support. This also removes the CMD_ prefix from the options which means we have to update the defconfigs aswell. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 10 May 2016
2016-05-02	8b0a448 Browse files » ARM: imx_v7_defconfig: add command mmc_extcsd ... Enable the mmc_extcsd command to read and write MMC/eMMC registers. Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 27 Apr 2016 Sascha Hauer committed on 2 May 2016
2016-05-02	075de1e Browse files » ARM: imx_v7_defconfig: enable NANDTEST command ... Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 27 Apr 2016 Sascha Hauer committed on 2 May 2016
2015-11-30	e7a8519 Browse files » ARM: mx6sx-sabresdb: set proper hostname ... Also move the initcall to the level matching the name of the function. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 18 Nov 2015 Sascha Hauer committed on 30 Nov 2015
2015-11-09	a540c30 Browse files » boards: Add phytec-som-imx6 ... The main idea behind this patch is to avoid redundant code. Because of the module similarities of all i.MX6 based phytec boards, we can merge its code. The phytec-som-imx6 merges the code of all i.MX6 based phytec SOMs. So we will have only one "board" in the barebox for phyCARD-i.MX6 and phyFLEX-i.MX6. Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 6 Nov 2015 Sascha Hauer committed on 9 Nov 2015
2015-10-27	97d5514 Browse files » ARM: i.MX6: add Technexion Wandboard support ... This adds support support for the i.MX6 Technexion Wandboard. The board comes in different SoC variants and different amounts of RAM. The baord type is autodetected based on the SoC type, so all boards can be supported by the same binary image. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Michael Grzeschik authored on 8 Jun 2015 Sascha Hauer committed on 27 Oct 2015
2015-07-31	3c9b56e Browse files » ARM: initial cm-fx6 support ... The cm-fx6 board is a module from Compulab with different i.MX6 SoCs. This module is also found in the Utilite Mini Computer this patch also adds support for. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 31 Jul 2015
2015-03-20	3da922b Browse files » ARM: Add ELTEC HiPerCam board support ... This adds support for the i.MX6 based Eltec HiPerCam board. This board comes with different i.MX6 flavours and different memory sizes. Currently supported is the i.MX6dl version with 256MB DDR3 RAM. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 20 Mar 2015
2015-02-19	fbf39b1 Browse files » imx_v7_defconfig: enable at least PNG support for splash ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 17 Feb 2015 Sascha Hauer committed on 19 Feb 2015
2014-12-04	d91a964 Browse files » ARM: imx_v7_defconfig: Enable ubiformat ... Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Christian Hemp authored on 3 Dec 2014 Sascha Hauer committed on 4 Dec 2014
2014-11-27	1b6d26a Browse files » ARM: i.MX: update imx_v7_defconfig ... Enable support for the i.MX6sx sabresdb and the KaRo Tx6x. The sabresdb needs regulator support, so enable this aswell. Also enable usbserial support. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Nov 2014
2014-11-12	6c6ff6e Browse files » ARM: update imx_v7_defconfig ... Enable micrel phy Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Christian Hemp authored on 11 Nov 2014 Sascha Hauer committed on 12 Nov 2014
2014-09-17	33bd1c4 Browse files » arm: imx6: add Gateworks Ventana board ... For now only the Quad 1GB variant is supported. Tested: - starting barebox over USB - writing barebox to NAND with barebox_update - starting Linux kernel over TFTP Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 16 Sep 2014 Sascha Hauer committed on 17 Sep 2014
2014-08-07	038be0f Browse files » Merge branch 'for-next/usb' Sascha Hauer committed on 7 Aug 2014
2014-07-18	4a872ae Browse files » USB: Kconfig: introduce USB_HOST symbol ... This renames USB to USB_HOST since this is what the symbol really means. Introduce a USB symbol which is selected by both USB_GADGET and USB_HOST. This gives us a symbol to let common USB code depend on. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 18 Jul 2014
2014-07-17	cb22c3c Browse files » ARM: i.MX6Q: Add support for Embedsky E9 board. ... This will add support for Embedsky E9 board. It is a small board based on i.MX6 Quad with 2G of RAM. http://en.embedsky.com/product_info.php?cateid=169&id=169 Signed-off-by: Andrey Panov <rockford@yandex.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Panov authored on 15 Jul 2014 Sascha Hauer committed on 17 Jul 2014
2014-07-04	8da9a22 Browse files » Merge branch 'for-next/imx' Sascha Hauer committed on 4 Jul 2014
2014-07-01	f3127d1 Browse files » arm: imx6: rename hummingboard directory to microsom ... The rule in barebox is to name the directories after the modules. As hummingboard is just one of the carriers for the MicroSOM module, name the directory accordingly. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 24 Jun 2014 Sascha Hauer committed on 1 Jul 2014
2014-06-23	7aa5486 Browse files » ARM: imx_v7_defconfig: update ... Enable blspec and menutree support which was lost. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 23 Jun 2014
2014-05-14	c524f74 Browse files » commands: NET_DHCP -> CMD_DHCP ... * this compile option actually turns on a command, so name it accordingly * also move the Kconfig definition into commands/Kconfig, thus placing getopt into the "Network commands" section * while at it, improve Kconfig documention Signed-off-by: Holger Schurig <holgerschurig@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Holger Schurig authored on 13 May 2014 Sascha Hauer committed on 14 May 2014
2014-05-14	5bd055b Browse files » commands: NET_PING -> CMD_PING ... * this compile option actually turns on a command, so name it accordingly * also move the Kconfig definition into commands/Kconfig, thus placing getopt into the "Network commands" section * while at it, improve Kconfig documention Signed-off-by: Holger Schurig <holgerschurig@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Holger Schurig authored on 13 May 2014 Sascha Hauer committed on 14 May 2014
2014-04-30	3e571c1 Browse files » imx6: Add support for phyCARD-i.MX6 ... Add support for Phytec phyCARD-i.MX6. - 1GB RAM on two banks - 1GB RAM on one bank - 2GB RAM on two banks Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Christian Hemp authored on 30 Apr 2014 Sascha Hauer committed on 30 Apr 2014