i2c: designware: use proper type for writel argument ...

We need to write DW_IC_ENABLE_ENABLE (1 << 0) to the register to enable,
but instead we were writing true. This happens to work, but is quite
unusual. Make the code more readable.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mfd: superio: depend on X86 || COMPILE_TEST ...

Super I/O chips are usually found x86 PCs. Make them depend on it,
so users of other arches aren't prompted for it, when they oldconfig.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mfd: superio: smsc: fix C99ism initial declaration in for loop ...

Codebase is meant to be gnu89, but was only enforced starting
with bc4840e98b94 ("kbuild: add -Wmissing-prototypes and -std=gnu89
to KBUILD_HOSTCFLAGS"). Since then, this driver no longer compiles.
Fix this.

Fixes: eaf020f1bb52 ("mfd: superio: add base SMSC MFD driver")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: dw_mmc: remove unused local variable ...

data_start is assigned once and never used. Drop it.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: stm32mp: depend on ARCH_STM32MP for SoC drivers ...

The i2c, MCI and reset controller peripherals are STM32-specific.
There is no reason to ask uses on oldconfig about it, thus make them
depend on ARCH_STM32MP || COMPILE_TEST.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

drivers: net: phy: at803x: add phy clk setup via dts ...

There are dt-bindings for the setup of the clk configuration in the phy.
This patch adds support for these bindings in the driver.

Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: phy: add uapi/linux/mdio.h from kernel for MDIO MMD access ...

The headerfile is used in the kernel for access of MDIO Managed Devices
(MMD) indirect access. Some drivers already use those device addresses.
We add the headerfile from the kernel and change the current users to
use the defines instead

Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

treewide: make use of PTR_ERR_OR_ZERO ...

PTR_ERR_OR_ZERO is designed to replace boiler plate like:

	if (IS_ERR(x))
		return PTR_ERR(x);
	return 0;

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: phy: micrel: backport ksz9031 phy-mode support ...

this patch will allow to use proper clock skew configuration from
devicetree instead of using board specific fixups.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: phy: port phy_interface_is_rgmii() from kernel ...

and remove duplicates from other drivers

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

watchdog: f71808e: maintain watchdog timeout occurred flag ...

If we experience a watchdog reset, the indicating flag should persist
till the Linux driver had a chance to see it.

The flag bit is special however in that writing 1 clears the bit and
writing 0 keeps it intact, i.e. :

Bit
read written  result
  0     0     = 0
  1     0     = 1
  0     1     = 0
  1     1     = 0

So in the bootloader, we should write a zero always. The OS on the
other hand can either write 1 or the old value after reading to
clear the flag.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/spdx'

Merge branch 'for-next/sandbox-compile-test'

Merge branch 'for-next/mmc'

Merge branch 'for-next/misc'

Merge branch 'for-next/kvx'

Merge branch 'for-next/fastboot'

mci: sdhci: Fix swapped argument for sdhci_write32 ...

sdhci_write32 accepts the register as second argument, not third.
Fix this up.

Fixes: 075179763a ("mci: sdhci: add Atmel SDHCI (sama5d2, sam9x60) support")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: nand: base: fix use of uninitialized struct member ...

ooblen is read in nand_do_read_ops, despite never having been assigned a
value. Because ooblen is used to indicate how many bytes of oobbuf are
usable and oobbuf is NULL, use 0 as initial value.

Found on ARCH=sandbox using clang-analyzer.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: xhci-hcd: replace opencoded non-atomic 64-bit MMIO with lo_hi helper ...

Commit 3c5317e9046 ("usb: xhci-hcd: Make use of lo_hi_readq/writeq()")
had made use of lo_hi_readq/writeq() to implement xhci_read/write_64(),
like Linux does, but this was removed in commit fddd1c7c51a8
("usb: host: remove xhci driver"). Reinstate it to make code clearer.

No functional change.

[Note: Linux doesn't use any readq/writeq, but does two 32-bit access
 always, even on 64-bit systems]

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: xhci-hcd: remove unused #include <asm/cache.h> ...

We don't use anything defined within, so drop it.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: macb: depend on HAS_DMA ...

The driver makes use of dma_alloc_coherent and brethren. Depend on
HAS_DMA to be sure, we don't run into link errors when compile-testing.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: fec_imx: depend on HAS_DMA ...

The driver makes use of dma_alloc_coherent and brethren. Depend on
HAS_DMA to be sure, we don't run into link errors when compile-testing.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ddr: fsl: depend on ARM ...

We have inline assembly in the driver, so we can't compile-test it
unmodified on non-ARM. Indicate so in the Kconfig.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: nand: orion: depend on ARM ...

We have inline assembly in the driver, so we can't compile-test it
unmodified on non-ARM. Indicate so in the Kconfig.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clocksource: arm_global_timer.c: remove unused asm/ header ...

We don't use the header and dropping it allows us to compile-test the
driver under non-ARM architectures. Do so.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: reword MCI_STARTUP text ...

With the recent addition of a generic device_detect for MCI devices,
the MCI_STARTUP help text is no longer accurate. Reword it, but leave
the option as-is as some boards may be broken if we drop the option
(e.g. because they still depend on a probe order or call
default_environment_path_set, but don't explicitly detect the device).

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: remove now-duplicate dev->detect implementations in host drivers ...

Previous commit introduced a fall-back MCI hw_dev->detect
implementation. All drivers touched in this commit populate hw_dev, so
lets drop their now-superfluous detect implementations.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: define fall-back hw_dev->detect for all MCIs ...

A barebox environment oftree node may reference its storage by a phandle
to a partition node under a MCI node. barebox will then call the
device's detect method to detect the card if this hasn't happened
before. Out of 17 MCI drivers, 8 host drivers already implement
a detect method, which just calls mci_detect_card.

Provide a generic implementation that does the same.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

serial: stm: set linux_console_name ...

We set the linux_console_name so for this uart the
linux.bootargs.console will be properly set.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>