state: Do not load state during state_new_from_node ...

The caller of state_new_from_node() may have it's own ideas what to
do when loading the state fails, so do not load it in the initialization
function, but instead let the caller do it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

state: driver: handle EPROBE_DEFER ...

When state_new_from_node() returns -ENODEV that means that there
is no device available for the node, so return -EPROBE_DEFER in this
case and hope a device is there later.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

state: Refactor state framework ...

The state framework grew organically over the time. Unfortunately the
architecture and abstractions disappeared during this period.

This patch refactors the framework to recreate the abstractions. The
main focus was the backend with its storage. The main use-case was to
offer better NAND support with less erase cycles and interchangeable
data formats (dtb,raw).

The general architecture now has a backend which consists of a data
format and storage. The storage consists of multiple storage buckets
each holding exactly one copy of the state data. A data format describes
a data serialization for the state framework. This can be either dtb or
raw. A storage bucket is a storage location which is used to store any
data. There is a (new) circular type which writes changes behind the
last written data and therefore reduces the number of erases. The other
type is a direct bucket which writes directly to a storage offset for
all non-erase storage.

Furthermore this patch splits up all classes into different files in a
subdirectory.

This is currently all in one patch as I can't see a good way to split
the changes up without having a non-working state framework in between.

The following diagram shows the new architecture roughly:

           .----------.
           |  state   |
           '----------'
                 |
                 |
                 v
  .----------------------------.
  |       state_backend        |
  |----------------------------|
  | + state_load(*state);      |
  | + state_save(*state);      |
  | + state_backend_init(...); |
  |                            |
  |                            |
  '----------------------------'
    |            |                   The format describes
    |            |                   how the state data
    |            '------------->     is serialized
    |   .--------------------------------------------.
    |   |      state_backend_format <INTERFACE>      |
    |   |--------------------------------------------|
    |   | + verify(*format, magic, *buf, len);       |
    |   | + pack(*format, *state, **buf, len);       |
    |   | + unpack(*format, *state, *buf, len);      |
    |   | + get_packed_len(*format, *state);         |
    |   | + free(*format);                           |
    |   '--------------------------------------------'
    |              ^                      ^
    |              *                      *
    |              *                      *
    |   .--------------------. .--------------------.
    |   | backend_format_dtb | | backend_format_raw |
    |   '--------------------' '--------------------'
    |
    |
    |
    v
.----------------------------------------------------------.
|                  state_backend_storage                   |
|----------------------------------------------------------|
| + init(...);                                             |
| + free(*storage);                                        |
| + read(*storage, *format, magic, **buf, *len, len_hint); |
| + write(*storage, *buf, len);                            |
| + restore_consistency(*storage, *buf, len);              |
'----------------------------------------------------------'
                              |
     The backend storage is responsible to manage multiple
     data copies and distribute them onto several buckets.
     Read data is verified against the given format to
     ensure that the read data is correct.
                              |
                              |
                              |
                              |
                              |
                              v
        .------------------------------------------.
        | state_backend_storage_bucket <INTERFACE> |
        |------------------------------------------|
        | + init(*bucket);                         |
        | + write(*bucket, *buf, len);             |
        | + read(*bucket, **buf, len_hint);        |
        | + free(*bucket);                         |
        '------------------------------------------'
                      ^     ^      ^
                     *      *       *
                    *       *        *
 A storage bucket represents*exactly one data copy at one
 data location. A circular b*cket writes any new data to
 the end of the bucket (for *educed erases on NAND). A
 direct bucket directly writ*s at one location.
               *            *             *
              *             *              *
             *              *               *
 .-----------------------.  *  .-------------------------.
 | backend_bucket_direct |  *  | backend_bucket_circular |
 '-----------------------'  *  '-------------------------'
             ^              *               ^
             |              *               |
             |              *               |
             |              *               |
             |  .-----------------------.   |
             '--| backend_bucket_cached |---'
                '-----------------------'
             A backend_bucket_cached is a transparent
             bucket that directly uses another bucket
             as backend device and caches all accesses.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

state: disable load command ...

Explicitly loading environment is not required as it will be loaded if
available during device probing

Signed-off-by: Enrico Jorns <ejo@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

state: use name of device node as name if alias is not available ...

Wihtout this patch, when using more than one state device an alias is
mandatory, otherwise the there will be two state devices with the name state.

This patch fixes the limitation by using the device node's name if no alias is
defined.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

state: make use of of_find_path_by_node() and add return -EPROBE_DEFER if device is not available ...

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

state: backend: support phandle and of_path references ...

This patch improves the backend property, it can be either a phandle or a
of_path. During probe() of the state driver the backend property is
dereferenced and the resulting of_path is saved in the state context. In a
later patch it will be used to generate a phandle reference to the backend
during DT fixup.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of_path: of_find_path(): add possibility to return .bb device ...

This patch adds a flags argument to the of_find_path() function. The only flag
defined for now is OF_FIND_PATH_FLAGS_BB. When used on NAND devices, the
function returns the bad block aware device (the ".bb" device).

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

state: add framework for persistent state handling ...

This patch adds a framework to describe, access, store and restore a set of
variables. A state variable set can be fully described in a devicetree node.
This node could be part of the regular devicetree blob or it could be an extra
devicetree solely for the state. The state variable set contains variables of
different types and a place to store the variable set.

For more information see:
    Documentation/devicetree/bindings/barebox/barebox,state.rst

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>