LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / drivers / net / smc91111.c

2015-04-13	6393f13 Browse files » net: smc1111: fix platform data initializations ... The configuration and control setup introduced in commit "extend the driver for 91c94 and 91c96 support" suffers from a typo defect, which makes the commit broken. The typo happens to be in barebox tree, while it's not in the tested patches I had, and there was a mismatch in my former submission, which is fixed by this patch. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Robert Jarzmik authored on 11 Apr 2015 Sascha Hauer committed on 13 Apr 2015
2015-02-04	cb79adb Browse files » net: smc1111: improve debug capability ... Improve smc1111 driver debug messages by printing the register accessed, the current bank, and the values. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Robert Jarzmik authored on 31 Jan 2015 Sascha Hauer committed on 4 Feb 2015
	a8d19f1 Browse files » net: smc1111: extend the driver for 91c94 and 91c96 support ... All the smcs family chips 91c94, 91c96, 91c100, 91c111 share almost the same behavior and register sets. The noticeable exceptions are coped with in this patch, ie : - 91c94 and 91c96 only have an internal 10 Mbps phy The registers used for phy discovery on later chips will corrupt the 91c96 state. - 91c94 and 91c96 have a control and config register quite different from their 91c1xx conterparts A platform data user defined couple of registers is introduced. If these values are 0, 91c1xx legacy behavior is assumed. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Robert Jarzmik authored on 31 Jan 2015 Sascha Hauer committed on 4 Feb 2015
	d6f8016 Browse files » net: smc1111: add 16 bits accessors, allow address shift ... Smc network IPs can be wired up in different funny ways. For example the lubbock pxa25x development platform wires all address lines shifted by 2, ie. bus A2 is smc91c96 A0, bus A3 is smc91c96 A1 etc ... In order to cope with the different possible combination, add a shift parameter for addresses. By default, the old behaviour using the 32 bit accesses is kept. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Robert Jarzmik authored on 31 Jan 2015 Sascha Hauer committed on 4 Feb 2015
2015-01-09	f5b8ea7 Browse files » Merge branch 'for-next/arm' Sascha Hauer committed on 9 Jan 2015
2015-01-06	fec4b79 Browse files » net: smc1111: fix memory congestions ... As the SMC1111 has a shared pool of 2k memory buckets for both transmission and reception, and as there are variants which have as few as 4 buckets in total, the memory pool can be hogged by unclaimed receptions, and impeed any further transmission. This happens on the zylonite pxa board, where 4 packets, most probably icmp and arp, fill the 4 buckets, preventing any further ethernet transmission, and stalling the driver. The fix is rather rough : whenever all the buckets are filled by reception packets, and if a transmission is required, the transmission code path will empty up all received packets. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Robert Jarzmik authored on 1 Jan 2015 Sascha Hauer committed on 6 Jan 2015
2015-01-05	b9ac7f3 Browse files » net: smc1111: move print_packet function ... Fix for a compiler complaint, because print_packet is needed by a function before it is declared. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Robert Jarzmik authored on 1 Jan 2015 Sascha Hauer committed on 5 Jan 2015
2014-09-16	ed6e965 Browse files » resource: Let dev_request_mem_region return an error pointer ... For all users fix or add the error check. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 16 Sep 2014
2014-05-15	22b878d Browse files » net: Pass eth_device to net_receive ... So that barebox has the information which interface a packet came from. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 15 May 2014
2013-09-22	7e6b99f Browse files » smc91111: add fixup for qemu phy support ... as today qemu does not support phy, it will return always 0x0 to any read on the mii bus. So the phy_id is 0 and the link is donw. To have the norwork running on versatilpb & other qenu board for the link up at 100Mbps. Only enable if qemu_fixup is set. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 22 Sep 2013 Sascha Hauer committed on 22 Sep 2013
2013-06-23	2e6bbb4 Browse files » remove unused debug Kconfig options ... ENABLE_DEVICE_NOISE is used only in two network drivers and is otherwise unused. ENABLE_FLASH_NOISE is completely unused. ENABLE_PARTITION_NOISE enables DEBUG in the partition command, but this code has no debug messages at all. Remove all this. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 23 Jun 2013
2013-02-26	dc62dd4 Browse files » smc911111: fix send and recv return value ... on error send error code and 0 on success Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 24 Feb 2013 Sascha Hauer committed on 26 Feb 2013
2013-02-13	6a25632 Browse files » Use new device_platform_driver() macro for drivers ... Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Shiyan authored on 12 Feb 2013 Sascha Hauer committed on 13 Feb 2013
2012-10-04	3c5327e Browse files » switch all platform_bus device/driver registering to platform_driver/device_register ... now register_driver and register_device are for bus only usage. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Jean-Christophe PLAGNIOL-VILLARD authored on 19 Sep 2012 Sascha Hauer committed on 4 Oct 2012
2012-10-03	d1e65d2 Browse files » Merge branch 'for-next/remove-fsf-address' ... Conflicts: drivers/net/miidev.c include/miidev.h Sascha Hauer committed on 3 Oct 2012
2012-09-25	2263e27 Browse files » net: introduce phylib ... Adapt phylib from linux switch all the driver to it reimplement mii bus This will allow to have - phy drivers - to only connect the phy at then opening of the device - if the phy is not ready or not up fail on open Same behaviour as in linux and will allow to share code and simplify porting. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Jean-Christophe PLAGNIOL-VILLARD authored on 9 Aug 2012 Sascha Hauer committed on 25 Sep 2012
2012-09-17	77322aa Browse files » Treewide: remove address of the Free Software Foundation ... The FSF address has changed in the past. Instead of updating it each time the address changes, just drop it completely treewide. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 17 Sep 2012
2012-02-25	e609cbe Browse files » net drivers: remove unused type_data ... Many net drivers set dev->type_data without ever using it, so just remove it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 25 Feb 2012
2011-09-22	3ee7877 Browse files » introduce io.h ... To allow for some generic io accessors introduce io.h and use this instead of asm/io.h throughout the tree. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 22 Sep 2011
2011-08-15	8fddb2e Browse files » net mii: add a parent pointer to miidevs and set it to the hardware device ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 15 Aug 2011
2011-08-15	6d16fbd Browse files » net: make the ethernet device a child of the hardware device ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 15 Aug 2011
2011-07-28	07506a2 Browse files » smc91111: switch to resources ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 28 Jul 2011
2010-11-19	52f5f20 Browse files » smc91111: Various sparse fixes. ... Patch fix all similar warnings found by sparse: drivers/net/smc91111.c:488:9: warning: incorrect type in argument 1 (different base types) expected void const volatile [noderef] <asn:2>*<noident> got unsigned long [unsigned] offset Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Marek Belisko authored on 18 Nov 2010 Sascha Hauer committed on 19 Nov 2010
2010-08-27	12f396a Browse files » net: rework the mii support ... this rework is done in order to add a phylib and allow to have phy driver support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 26 Aug 2010 Sascha Hauer committed on 27 Aug 2010
2010-06-17	c70689d Browse files » network drivers: call net_receive directly instead of NetReceive ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 17 Jun 2010
2010-02-01	4903636 Browse files » smc91111: fix odering of mac address read from EEPROM ... On my little endian PXA270, the ethernet address is byte swapped: correct ethernet address: 00:50:c2:80:a7:bd broken ethernet address: 50:00:80:c2:bd:a7 The correct value is what the sticker on the baoard and the linux driver says. This patch fixes the problem by reading the ethaddr byte-wise from the eeprom. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Marc Kleine-Budde authored on 1 Feb 2010 Sascha Hauer committed on 1 Feb 2010
2009-12-15	a3ffa97 Browse files » rename U-Boot-v2 project to barebox ... This has been done with the following script: find -path ./.git -prune -o -type f -print0 \| xargs -0 -r sed -i \ -e 's/u2boot/barebox/g' \ -e 's/U2Boot/barebox/g' \ -e 's/U-boot V2/barebox/g' \ -e 's/u-boot v2/barebox/g' \ -e 's/U-Boot V2/barebox/g' \ -e 's/U-Boot-v2/barebox/g' \ -e 's/U_BOOT/BAREBOX/g' \ -e 's/UBOOT/BAREBOX/g' \ -e 's/uboot/barebox/g' \ -e 's/u-boot/barebox/g' \ -e 's/u_boot/barebox/g' \ -e 's/U-Boot/barebox/g' \ -e 's/U-boot/barebox/g' \ -e 's/U-BOOT/barebox/g' find -path ./.git -prune -o \( -name "u-boot" -o -name "uboot" -o -name "u_boot" \) -print0 \| \ xargs -0 -r rename 's/u[-_]?boot/barebox/' It needs some manual fixup following in the next patch Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 15 Dec 2009
2009-07-21	58f5a97 Browse files » cdev fixes for new boards ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 21 Jul 2009
2009-07-09	001fd57 Browse files » smc91111: use miiphy functions for autonegotiation ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 9 Jul 2009
2009-07-01	bf96799 Browse files » Adding the network driver for the SMSC91C111 ethernet device. ... Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de> Juergen Beisert committed on 1 Jul 2009