Oleksij and Kevin's Useless Devices.
        O&KUD Max9331

 AR9331 400MHz MIPS
   64M DRAM
   16M SPI Flash
    4G USB Nand Flash
     3 User LEDs
     3 Ports(1Wan/2Lan)
     1 TTL Debug Uart

Signed-off-by: Du Huanpeng <u74147@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

SOC_QCA_QCA4531 is selected, but defined no where. fix this.

Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

With multiimage support it makes no more sense,
every board should have Makefile and some lowlevel code.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

the CONFIG typos was not real issue.
The defconfig typo i detected only after clean compile.
I hope we can migrate barebox MIPS to multiimage soon.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

More information about this board can be found here:
https://www.8devices.com/products/lima

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This product can be found here:
https://dptechnics.com/en/products/dpt-module-v1.html

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This provides low level initialization of pll and ddr2. Resulting binary
should work from SRAM, DDR2 and SPI flash. If started from DDR2 RAM
level initialization will skipped.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

QCA AR9331 and QCA AR9344 have some similar part but different uart engines.
We need this flag to provide common debug_ll support.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

Black Swift is a tiny coin-sized embedded computer based on AR9331 SoC.
See http://www.black-swift.com/ for details.

See also Black Swift kickstarter page:
  https://www.kickstarter.com/projects/1133560316/black-swift-tiny-wireless-computer

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This board support code can be used for TP-LINK WR703 too.

TP-LINK WR703 is very similar to TP-LINK MR3020, there are
some non-essential differences:

  * WR703 is smaller and cheaper;
  * WR703 has only one led, but MR3020 has five leds;
  * MR3020 uses mini-USB connector, WR703 uses micro-USB connector.

See https://forum.openwrt.org/viewtopic.php?id=45159 for details.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Use the mach-ath79 name for compatibility with linux kernel.

Signed-off-by: Du Huanpeng <u74147@gmail.com>
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>