This adapts all files that were identifed by licensecheck
(https://salsa.debian.org/build-common-team/licensecheck.git) as
licensed under the GPL.

The advantage is that these specifiers are machine-parseable which helps
license conformance, e.g. for packaging barebox in Debian.

While touching these files also do some minor comment reformatting to
get some uniform layout.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Roland Hieber <rhi@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Most callers of arm_setup_stack substract a fixed offset of 8, 12 or 16
bytes from the stack top. This is unnecessary as on ARM we have a stack
that decrements before storing values. Substracting this offset probably
goes back to the U-Boot version we forked from. Stop this now.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

When we are linked at 0x0 and running at 0x01000000 then
get_runtime_offset() should return 0x01000000 and not 0xff000000. This
makes get_runtime_offset() more consistent and better understandable.

This was tested on a Freescale i.MX53 Quickstart board. Additionally
relocate_to_adr() was tested since that is normally not called.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Most files including imx6-mmdc.h do not actually use anything from
it. Clean this up.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This file originates in Linux.  Linux has it under include/linux/
directory since commit dccd2304cc90.
Let's move it to the same place as well in barebox.

This commit was generated by the following commands:

  find -name '*.[chS]' | xargs sed -i -e 's:<sizes.h>:<linux/sizes.h>:'
  git mv include/sizes.h include/linux/

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Mostly to make it clear that boarddata needs to be
something we can dereference.

As this is a pretty invasive change, use the opportunity
to make the signature 64bit safe.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This adds support for new board variants. Now Supported are:

- i.MX6q module with 1GiB Micron RAM
- i.MX6d/q modules with 1GiB/2GiB Nanya RAM
- i.MX6s modules with 512MiB/1GiB Nanya RAM

This has been tested on:

- i.MX6q module with 1GiB Micron RAM
- i.MX6d module with 2GiB Nanya RAM
- i.MX6s module with 1GiB Nanya RAM

The possible RAM equipment is:

- For the 512MiB module: 2x Nanya nt5cb128m16fp-di
- For the 1GiB modules: 2x Nanya nt5cc256m16cp or 4x Micron MT41K128M16JT-125
- For the 2GiB module: 4x Nanya nt5cc256m16cp

The 512MiB Nanya board is assumed to work with the same DCD table
as the 1GiB Nanya board. The variant is detected by mirroring at
512MiB, but this hasn't been tested by Pengutronix.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

An entry function should begin with a exception header. For this to work
properly the entry function should not contain any code which gcc might
put before the header. To make this sure change the ENTRY_FUNCTION macro
so that it generates one function which only contains the exception header
and a second function which contains the original body of the entry function.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This is an i.MX6 based Q7 module, see:

http://www.dfi.com.tw/products/ProductDetails.jsp?productId=1164&mainCategoryId=2&subCategoryId=581

This patch adds basic support for this module.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>