The FSF address has changed in the past. Instead of updating it
each time the address changes, just drop it completely treewide.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The flash header is needed for pbl support, so move it to
separate file to be able to add it to pbl-y

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

With compressed image support TEXT_BASE will become the base
address of the uncompressed image. What the boards want instead
is the base address of the decompressor code or, if not compressed,
the base address of the uncompressed image. Use _text which is
the correct one for both cases.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The exception vector table will become part of the uncompressed image,
so we can't reference them from the lowlevel init stuff anymore.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

else USB device doesn't work as the hardware fix is present on the
boards

Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

We now have DEVICE_ID_DYNAMIC for dynamic allocation of device ids,
Use it where applicable.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This means using an uint64_t instead of a struct pad_desc which allows
us to change pad settings using logic operations. Also with this we
can more easily keep the iomux tables in sync with the kernel.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The image sizes have been hardcoded to 256K. This is inefficient
for smaller images and nonfunctional for bigger images. Calculate
the image size during compile time and use it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Traditionally U-Boot and barebox have the exception vectors at
the start of the binary. There is no real reason in doing so,
because in the majority of cases this data will not be at 0x0
where it could be used as vectors directly anyway.
This patch puts the vectors into a separate linker section and
defines an head function which is placed at the start of the
image instead. Putting this in a separate function also has
the advantage that it can be placed at the start of images
which require an additional header like several Freescale i.MX
images. As the head function contains the barebox arm magic
those images can now also be detected as barebox images.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Without num_modes the imx fb driver won't work. Specify this
in the boards and also bail out in the driver when num_modes
is unspecified.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

To allow for some generic io accessors introduce io.h and use
this instead of asm/io.h throughout the tree.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

The new MMU setup will need SDRAM base addresses and sizes.
For this reason convert the MMU enabled ARM boards:

- move mem setup to mem_initcall. This is early but
  still makes sure that we already have the console available
- move MMU setup in this initcall temporary as after the mmu_init will generic

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

this will automaticaly register the device to armlinux_add_dram

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

pass the hccr and hcor register base via resource

instroduce add_generic_usb_echi_device with hccr = base + 0x100 and
hcor = base + 0x140

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Switch to the generic way of setting a MAC address for a
device.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add a helper function for boards to register their memory
devices. This makes the board code smaller and also helps
getting rid of map_base and struct memory_platform_data.

And switch all of the memory to it

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

we keep struct memory_platform_data for now on we will switch off the memories
resources to struct resource

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

At least partly. We have pads in barebox that we do
not have in the kernel. Also, this with this patch we
do not set the sion bit which the kernel does.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

as suggested by Baruch Siach

Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

- support NAND external boot
- enable only used clocks
- LCD fix in /env/bin/init
- I2C support
- SDCard support
- USB Host 1 support
- DFU support on OTG port
- update defconfig

Signed-off-by: Eric Bénard <eric@eukrea.com>

Signed-off-by: Marc Reilly <marc@cpdesign.com.au>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>