LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / arch / arm / boards / pcm038 / pcm970.c

2012-09-17	77322aa Browse files » Treewide: remove address of the Free Software Foundation ... The FSF address has changed in the past. Instead of updating it each time the address changes, just drop it completely treewide. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 17 Sep 2012
2012-08-12	a231dcd Browse files » devices: fix missing conversion to DEVICE_ID_DYNAMIC ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 11 Aug 2012 Sascha Hauer committed on 12 Aug 2012
2012-07-20	52b444c Browse files » PCM970: Add MMC support ... Here is a test output: barebox 2012.07.0-00136-ge3ab4bc-dirty #23 Tue Jul 3 23:10:44 MSK 2012 Board: Phytec phyCORE-i.MX27 mc13xxx-spi@mc13xxx-spi0: Found MC13783 ID: 0x00009b [Rev: 3.1] cfi_flash@cfi_flash0: found cfi flash at c0000000, size 33554432 NAND device: Manufacturer ID: 0x20, Chip ID: 0x36 (ST Micro NAND 64MiB 1,8V 8-bit) Bad block table found at page 131040, version 0x01 Bad block table found at page 131008, version 0x01 imxfb@imxfb0: i.MX Framebuffer driver cfi_protect: protect 0xc0080000 (size 1048576) Using environment in NOR Flash Found NXP ISP150x ULPI transceiver (0x04cc:0x1504). ehci@ehci0: USB EHCI 1.00 imx-mmc@mci0: registered as mci0 Malloc space: 0xa6f00000 -> 0xa7efffff (size 16 MB) Stack space : 0xa6ef8000 -> 0xa6f00000 (size 32 kB) running /env/bin/init... Hit m for menu or any other key to stop autoboot: 3 type exit to get to the menu barebox@Phytec phyCORE-i.MX27:/ mci0.probe=1 mci@mci0: registered disk0 barebox@Phytec phyCORE-i.MX27:/ devinfo mci0 resources: driver: mci Card: Attached is an SD Card (Version: 1.10) Capacity: 1962 MiB CID: 1C535653-44432020-1000013C-7E007200 CSD: 005E0032-5F5A83D5-2DB7FFBF-96800000 Max. transfer speed: 25000000 Hz Manufacturer ID: 1C OEM/Application ID: 5356 Product name: 'SDC ' Product revision: 1.0 Serial no: 81022 Manufacturing date: 2.2007 Parameters: probe = 1 barebox@Phytec phyCORE-i.MX27:/ mkdir /d barebox@Phytec phyCORE-i.MX27:/ mount /dev/disk0.0 fat /d barebox@Phytec phyCORE-i.MX27:/ ls /d barebox.bin barebox@Phytec phyCORE-i.MX27:/ Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Shiyan authored on 19 Jul 2012 Sascha Hauer committed on 20 Jul 2012
2012-07-01	5f03074 Browse files » resource: store 'end' instead of 'size' in struct resource ... Storing the size instead of the resource end in struct resource was a mistake. 'size' ranges from 0 to UINT[32\|64]_MAX + 1 which obviously leads to problems. 'end' on the other hand will never exceed UINT[32\|64]_MAX. Also this way we can express a iomem region covering the whole address space. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 1 Jul 2012
2012-05-23	0f888c2 Browse files » PCM970: Added support for CompactFlash ... Added support for CompactFlash cards for PCM970 development board via PCMCIA window. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Shiyan authored on 20 May 2012 Sascha Hauer committed on 23 May 2012
2012-05-14	facb9da Browse files » PCM038: Move USBH2 initialization to PCM970 ... Actually ISP1504 ULPI chip are installed on PCM970 development board. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Shiyan authored on 14 May 2012 Sascha Hauer committed on 14 May 2012
2012-05-13	0c55549 Browse files » PCM038: Initial PCM970 development board support ... Some devices need to be moved to the PCM970 source file later, because in fact these devices are not installed on the main unit PCM038. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Shiyan authored on 13 May 2012 Sascha Hauer committed on 13 May 2012